mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>, Peter Anvin <hpa@zytor.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Andy Lutomirski <luto@kernel.org>, Borislav Petkov <bp@alien8.de>,
	Steven Rostedt <rostedt@goodmis.org>
Subject: [patch 06/41] x86/traps: Simplify pagefault tracing logic
Date: Fri, 25 Aug 2017 12:31:09 +0200	[thread overview]
Message-ID: <20170825104413.434023371@linutronix.de> (raw)
In-Reply-To: <20170825103103.287814238@linutronix.de>

[-- Attachment #1: x86-traps--Simplyfy-pagefault-tracing-logic.patch --]
[-- Type: text/plain, Size: 6273 bytes --]

Make use of the new irqvector tracing static key and remove the duplicated
trace_do_pagefault() implementation.

If irq vector tracing is disabled, then the overhead of this is a single
NOP5, which is a reasonable tradeoff to avoid duplicated code and the
unholy macro mess.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/entry/entry_32.S    |    8 -------
 arch/x86/entry/entry_64.S    |   13 -----------
 arch/x86/include/asm/traps.h |   10 ---------
 arch/x86/kernel/kvm.c        |    2 -
 arch/x86/mm/fault.c          |   47 ++++++++++---------------------------------
 5 files changed, 15 insertions(+), 65 deletions(-)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -891,14 +891,6 @@ BUILD_INTERRUPT3(hyperv_callback_vector,
 
 #endif /* CONFIG_HYPERV */
 
-#ifdef CONFIG_TRACING
-ENTRY(trace_page_fault)
-	ASM_CLAC
-	pushl	$trace_do_page_fault
-	jmp	common_exception
-END(trace_page_fault)
-#endif
-
 ENTRY(page_fault)
 	ASM_CLAC
 	pushl	$do_page_fault
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -829,17 +829,6 @@ ENTRY(\sym)
 END(\sym)
 .endm
 
-#ifdef CONFIG_TRACING
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#else
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#endif
-
 idtentry divide_error			do_divide_error			has_error_code=0
 idtentry overflow			do_overflow			has_error_code=0
 idtentry bounds				do_bounds			has_error_code=0
@@ -1004,7 +993,7 @@ idtentry xen_stack_segment	do_stack_segm
 #endif
 
 idtentry general_protection	do_general_protection	has_error_code=1
-trace_idtentry page_fault	do_page_fault		has_error_code=1
+idtentry page_fault		do_page_fault		has_error_code=1
 
 #ifdef CONFIG_KVM_GUEST
 idtentry async_page_fault	do_async_page_fault	has_error_code=1
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -39,7 +39,6 @@ asmlinkage void machine_check(void);
 asmlinkage void simd_coprocessor_error(void);
 
 #ifdef CONFIG_TRACING
-asmlinkage void trace_page_fault(void);
 #define trace_stack_segment stack_segment
 #define trace_divide_error divide_error
 #define trace_bounds bounds
@@ -54,6 +53,7 @@ asmlinkage void trace_page_fault(void);
 #define trace_alignment_check alignment_check
 #define trace_simd_coprocessor_error simd_coprocessor_error
 #define trace_async_page_fault async_page_fault
+#define trace_page_fault page_fault
 #endif
 
 dotraplinkage void do_divide_error(struct pt_regs *, long);
@@ -74,14 +74,6 @@ asmlinkage struct pt_regs *sync_regs(str
 #endif
 dotraplinkage void do_general_protection(struct pt_regs *, long);
 dotraplinkage void do_page_fault(struct pt_regs *, unsigned long);
-#ifdef CONFIG_TRACING
-dotraplinkage void trace_do_page_fault(struct pt_regs *, unsigned long);
-#else
-static inline void trace_do_page_fault(struct pt_regs *regs, unsigned long error)
-{
-	do_page_fault(regs, error);
-}
-#endif
 dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *, long);
 dotraplinkage void do_coprocessor_error(struct pt_regs *, long);
 dotraplinkage void do_alignment_check(struct pt_regs *, long);
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -263,7 +263,7 @@ do_async_page_fault(struct pt_regs *regs
 
 	switch (kvm_read_and_reset_pf_reason()) {
 	default:
-		trace_do_page_fault(regs, error_code);
+		do_page_fault(regs, error_code);
 		break;
 	case KVM_PV_REASON_PAGE_NOT_PRESENT:
 		/* page is swapped out by the host. */
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -1254,10 +1254,6 @@ static inline bool smap_violation(int er
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
  * routines.
- *
- * This function must have noinline because both callers
- * {,trace_}do_page_fault() have notrace on. Having this an actual function
- * guarantees there's a function trace entry.
  */
 static noinline void
 __do_page_fault(struct pt_regs *regs, unsigned long error_code,
@@ -1490,27 +1486,6 @@ static noinline void
 }
 NOKPROBE_SYMBOL(__do_page_fault);
 
-dotraplinkage void notrace
-do_page_fault(struct pt_regs *regs, unsigned long error_code)
-{
-	unsigned long address = read_cr2(); /* Get the faulting address */
-	enum ctx_state prev_state;
-
-	/*
-	 * We must have this function tagged with __kprobes, notrace and call
-	 * read_cr2() before calling anything else. To avoid calling any kind
-	 * of tracing machinery before we've observed the CR2 value.
-	 *
-	 * exception_{enter,exit}() contain all sorts of tracepoints.
-	 */
-
-	prev_state = exception_enter();
-	__do_page_fault(regs, error_code, address);
-	exception_exit(prev_state);
-}
-NOKPROBE_SYMBOL(do_page_fault);
-
-#ifdef CONFIG_TRACING
 static nokprobe_inline void
 trace_page_fault_entries(unsigned long address, struct pt_regs *regs,
 			 unsigned long error_code)
@@ -1522,21 +1497,23 @@ trace_page_fault_entries(unsigned long a
 }
 
 dotraplinkage void notrace
-trace_do_page_fault(struct pt_regs *regs, unsigned long error_code)
+do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
+	unsigned long address = read_cr2(); /* Get the faulting address */
+	enum ctx_state prev_state;
+
 	/*
-	 * The exception_enter and tracepoint processing could
-	 * trigger another page faults (user space callchain
-	 * reading) and destroy the original cr2 value, so read
-	 * the faulting address now.
+	 * We must have this function tagged with __kprobes, notrace and call
+	 * read_cr2() before calling anything else. To avoid calling any kind
+	 * of tracing machinery before we've observed the CR2 value.
+	 *
+	 * exception_{enter,exit}() contain all sorts of tracepoints.
 	 */
-	unsigned long address = read_cr2();
-	enum ctx_state prev_state;
+	if (trace_irqvectors_enabled())
+		trace_page_fault_entries(address, regs, error_code);
 
 	prev_state = exception_enter();
-	trace_page_fault_entries(address, regs, error_code);
 	__do_page_fault(regs, error_code, address);
 	exception_exit(prev_state);
 }
-NOKPROBE_SYMBOL(trace_do_page_fault);
-#endif /* CONFIG_TRACING */
+NOKPROBE_SYMBOL(do_page_fault);

  parent reply	other threads:[~2017-08-25 11:04 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-25 10:31 [patch 00/41] x86: Cleanup IDT code Thomas Gleixner
2017-08-25 10:31 ` [patch 01/41] x86/irq: Remove vector_used_by_percpu_irq() Thomas Gleixner
2017-08-25 10:31 ` [patch 02/41] x86/irq: Unexport used_vectors Thomas Gleixner
2017-08-25 10:31 ` [patch 03/41] x86/irq: Move ifdeffery to header file Thomas Gleixner
2017-08-25 12:45   ` Thomas Gleixner
2017-08-25 10:31 ` [patch 04/41] x86/boot: Move EISA setup to a proper place Thomas Gleixner
2017-08-25 11:59   ` Thomas Gleixner
2017-08-25 10:31 ` [patch 05/41] x86/tracing: Introduce a static key for exception tracing Thomas Gleixner
2017-08-25 15:24   ` Steven Rostedt
2017-08-25 10:31 ` Thomas Gleixner [this message]
2017-08-25 14:59   ` [patch 06/41] x86/traps: Simplify pagefault tracing logic Andy Lutomirski
2017-08-25 15:10   ` Steven Rostedt
2017-08-25 15:11     ` Thomas Gleixner
2017-08-25 10:31 ` [patch 07/41] x86/apic: Remove the duplicated tracing version of local_timer_interrupt Thomas Gleixner
2017-08-25 15:29   ` Steven Rostedt
2017-08-25 10:31 ` [patch 08/41] x86/apic: Use this_cpu_ptr in local_timer_interrupt Thomas Gleixner
2017-08-25 10:31 ` [patch 09/41] x86/irq: Get rid of duplicated trace_x86_platform_ipi() code Thomas Gleixner
2017-08-25 15:41   ` Steven Rostedt
2017-08-25 10:31 ` [patch 10/41] x86/apic: Remove the duplicated tracing versions of interrupts Thomas Gleixner
2017-08-25 15:49   ` Steven Rostedt
2017-08-28  7:50     ` Peter Zijlstra
2017-08-25 10:31 ` [patch 11/41] x86/irqwork: Get rid of duplicated tracing interrupt code Thomas Gleixner
2017-08-25 15:55   ` Steven Rostedt
2017-08-25 10:31 ` [patch 12/41] x86/mce: Remove " Thomas Gleixner
2017-08-25 16:09   ` Steven Rostedt
2017-08-25 16:13     ` Thomas Gleixner
2017-08-25 10:31 ` [patch 13/41] x86/smp: Remove pointless duplicated " Thomas Gleixner
2017-08-25 18:24   ` Steven Rostedt
2017-08-25 10:31 ` [patch 14/41] x86/smp: Use static key for reschedule interrupt tracing Thomas Gleixner
2017-08-25 19:40   ` Steven Rostedt
2017-08-25 20:07     ` Thomas Gleixner
2017-08-25 21:10       ` Steven Rostedt
2017-08-25 10:31 ` [patch 15/41] x86/idt: Remove tracing idt completely Thomas Gleixner
2017-08-25 21:18   ` Steven Rostedt
2017-08-25 21:22     ` Thomas Gleixner
2017-08-25 21:29       ` Thomas Gleixner
2017-08-25 10:31 ` [patch 16/41] x86/tracing: Disentangle pagefault and resched IPI tracing key Thomas Gleixner
2017-08-25 10:31 ` [patch 17/41] x86/idt: Unify gate_struct handling for 32/64bit Thomas Gleixner
2017-08-25 10:31 ` [patch 18/41] x86/percpu: Use static initializer for GDT entry Thomas Gleixner
2017-08-25 10:31 ` [patch 19/41] x86/fpu: Use bitfield accessors for desc_struct Thomas Gleixner
2017-08-25 10:31 ` [patch 20/41] x86: Replace access to desc_struct:a/b fields Thomas Gleixner
2017-08-25 11:14   ` Juergen Gross
2017-08-25 13:56   ` Boris Ostrovsky
2017-08-25 14:02     ` Thomas Gleixner
2017-08-25 14:16       ` Steven Rostedt
2017-08-25 10:31 ` [patch 21/41] x86/gdt: Use bitfields for initialization Thomas Gleixner
2017-08-25 10:31 ` [patch 22/41] x86/ldttss: Cleanup 32bit descriptors Thomas Gleixner
2017-08-25 10:31 ` [patch 23/41] x86/idt: Create file for IDT related code Thomas Gleixner
2017-08-25 10:31 ` [patch 24/41] x86/idt: Move 32bit idt_descr to C code Thomas Gleixner
2017-08-25 10:31 ` [patch 25/41] x86/idt: Remove unused set_trap_gate() Thomas Gleixner
2017-08-25 10:31 ` [patch 26/41] x86/idt: Consolidate IDT invalidation Thomas Gleixner
2017-08-25 10:31 ` [patch 27/41] x86/idt: Move early IDT handler setup to IDT code Thomas Gleixner
2017-08-25 10:31 ` [patch 28/41] x86/idt: Move early IDT setup out of 32bit asm Thomas Gleixner
2017-08-25 10:31 ` [patch 29/41] x86/idt: Prepare for table based init Thomas Gleixner
2017-08-25 10:31 ` [patch 30/41] x86/idt: Switch early trap init to IDT tables Thomas Gleixner
2017-08-25 14:57   ` Andy Lutomirski
2017-08-25 10:31 ` [patch 31/41] x86/idt: Move debug stack init to table based Thomas Gleixner
2017-08-25 10:31 ` [patch 32/41] x86/idt: Move ist stack based traps to table init Thomas Gleixner
2017-08-25 10:31 ` [patch 33/41] x86/idt: Move regular trap init to tables Thomas Gleixner
2017-08-25 10:31 ` [patch 34/41] x86/idt: Move APIC gate initialization " Thomas Gleixner
2017-08-25 10:31 ` [patch 35/41] x86/idt: Move interrupt gate initialization to IDT code Thomas Gleixner
2017-08-25 10:31 ` [patch 36/41] x86/idt: Remove unused functions/inlines Thomas Gleixner
2017-08-25 10:31 ` [patch 37/41] x86/irq: Get rid of the first_system_vector bogisity Thomas Gleixner
2017-08-25 10:31 ` [patch 38/41] x86/idt: Deinline setup functions Thomas Gleixner
2017-08-25 10:31 ` [patch 39/41] x86/idt: Simplify alloc_intr_gate Thomas Gleixner
2017-08-25 11:16   ` Juergen Gross
2017-08-25 10:31 ` [patch 40/41] x86/idt: Hide set_intr_gate() Thomas Gleixner
2017-08-25 10:56   ` Paolo Bonzini
2017-08-25 10:31 ` [patch 41/41] x86/irq: Remove duplicated used_vectors definition Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170825104413.434023371@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=bp@alien8.de \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome