mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dietmar Eggemann <dietmar.eggemann@arm.com>
To: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Juri Lelli <juri.lelli@arm.com>
Subject: [PATCH 4/4] arm: dts: r8a7790: add cpu capacity-dmips-mhz information
Date: Wed, 30 Aug 2017 15:41:20 +0100	[thread overview]
Message-ID: <20170830144120.9312-5-dietmar.eggemann@arm.com> (raw)
In-Reply-To: <20170830144120.9312-1-dietmar.eggemann@arm.com>

The following 'capacity-dmips-mhz' dt property values are used:

Cortex-A15: 1024, Cortex-A7: 539

They have been derived form the cpu_efficiency values:

Cortex-A15: 3891, Cortex-A7: 2048

by scaling them so that the Cortex-A15s (big cores) use 1024.

The cpu_efficiency values were originally derived from the "Big.LITTLE
Processing with ARM Cortex™-A15 & Cortex-A7" white paper
(http://www.cl.cam.ac.uk/~rdm34/big.LITTLE.pdf). Table 1 lists 1.9x
(3891/2048) as the Cortex-A15 vs Cortex-A7 performance ratio for the
Dhrystone benchmark.

The following platform is affected once cpu-invariant accounting
support is re-connected to the task scheduler:

r8a7790-lager

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2805a8608d4b..a57c0e170d8b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -56,6 +56,7 @@
 			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1400000 1000000>,
@@ -73,6 +74,7 @@
 			clock-frequency = <1300000000>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu2: cpu@2 {
@@ -82,6 +84,7 @@
 			clock-frequency = <1300000000>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu3: cpu@3 {
@@ -91,6 +94,7 @@
 			clock-frequency = <1300000000>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu4: cpu@100 {
@@ -100,6 +104,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		cpu5: cpu@101 {
@@ -109,6 +114,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		cpu6: cpu@102 {
@@ -118,6 +124,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		cpu7: cpu@103 {
@@ -127,6 +134,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		L2_CA15: cache-controller-0 {
-- 
2.11.0

  parent reply	other threads:[~2017-08-30 14:41 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-30 14:41 [PATCH 0/4] arm: remove cpu_efficiency Dietmar Eggemann
2017-08-30 14:41 ` [PATCH 1/4] arm: topology: " Dietmar Eggemann
2017-09-04  7:49   ` Vincent Guittot
2017-09-06 11:43     ` Dietmar Eggemann
2017-09-06 12:40       ` Vincent Guittot
2017-09-07 10:41         ` Dietmar Eggemann
2017-08-30 14:41 ` [PATCH 2/4] arm: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information Dietmar Eggemann
2017-08-30 20:26   ` Krzysztof Kozlowski
2017-08-31 10:36     ` Dietmar Eggemann
2017-09-03 19:56       ` Krzysztof Kozlowski
2017-09-06 11:47         ` Dietmar Eggemann
2017-09-17  7:37   ` Krzysztof Kozlowski
2017-08-30 14:41 ` [PATCH 3/4] arm: dts: exynos: add exynos5422 " Dietmar Eggemann
2017-09-17  7:37   ` Krzysztof Kozlowski
2017-08-30 14:41 ` Dietmar Eggemann [this message]
2017-09-18  7:39   ` [PATCH 4/4] arm: dts: r8a7790: add " Simon Horman
2017-10-09 17:55     ` Dietmar Eggemann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170830144120.9312-5-dietmar.eggemann@arm.com \
    --to=dietmar.eggemann@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=juri.lelli@arm.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=vincent.guittot@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®