From: Hans de Goede <hdegoede@redhat.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>,
Peter Rosin <peda@axentia.se>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
platform-driver-x86@vger.kernel.org, devel@driverdev.osuosl.org,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@linux.intel.com>,
Sathyanarayanan Kuppuswamy Natarajan <sathyaosid@gmail.com>,
linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org
Subject: [PATCH 08/11] staging: typec: tcpm: Set mux to device mode when configured as such
Date: Fri, 1 Sep 2017 23:48:42 +0200 [thread overview]
Message-ID: <20170901214845.7153-9-hdegoede@redhat.com> (raw)
In-Reply-To: <20170901214845.7153-1-hdegoede@redhat.com>
Setting the mux to TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT when the
data-role is device is not correct. Plenty of devices support operating
as USB device through a (separate) USB device controller.
So this commit instead splits out TYPEC_MUX_USB into TYPEC_MUX_USB_HOST
and TYPEC_MUX_USB_DEVICE and makes tcpm_set_roles() set the mux
accordingly.
Likewise TCPC_MUX_DP gets renamed to TCPC_MUX_DP_SRC to make clear that
this is for configuring the Type-C port as a Display Port source, not a
sink.
Last this commit makes tcpm_reset_port() to set the mux to
TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT so that it does not and up
staying in host (and with this commit also device) mode after a detach.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/staging/typec/tcpm.c | 7 ++++---
drivers/staging/typec/tcpm.h | 22 ++++++++++++++--------
2 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
index 8af62e74d54c..ffe7e26d4ed3 100644
--- a/drivers/staging/typec/tcpm.c
+++ b/drivers/staging/typec/tcpm.c
@@ -752,11 +752,11 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
int ret;
if (data == TYPEC_HOST)
- ret = tcpm_mux_set(port, TYPEC_MUX_USB,
+ ret = tcpm_mux_set(port, TYPEC_MUX_USB_HOST,
TCPC_USB_SWITCH_CONNECT);
else
- ret = tcpm_mux_set(port, TYPEC_MUX_NONE,
- TCPC_USB_SWITCH_DISCONNECT);
+ ret = tcpm_mux_set(port, TYPEC_MUX_USB_DEVICE,
+ TCPC_USB_SWITCH_CONNECT);
if (ret < 0)
return ret;
@@ -2025,6 +2025,7 @@ static void tcpm_reset_port(struct tcpm_port *port)
tcpm_init_vconn(port);
tcpm_set_current_limit(port, 0, 0);
tcpm_set_polarity(port, TYPEC_POLARITY_CC1);
+ tcpm_mux_set(port, TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT);
tcpm_set_attached_state(port, false);
port->try_src_count = 0;
port->try_snk_count = 0;
diff --git a/drivers/staging/typec/tcpm.h b/drivers/staging/typec/tcpm.h
index 7e9a6b7b5cd6..f662eed48c86 100644
--- a/drivers/staging/typec/tcpm.h
+++ b/drivers/staging/typec/tcpm.h
@@ -83,17 +83,23 @@ enum tcpc_usb_switch {
};
/* Mux state attributes */
-#define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */
-#define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */
-#define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */
+#define TCPC_MUX_USB_DEVICE_ENABLED BIT(0) /* USB device enabled */
+#define TCPC_MUX_USB_HOST_ENABLED BIT(1) /* USB host enabled */
+#define TCPC_MUX_DP_SRC_ENABLED BIT(2) /* DP enabled */
+#define TCPC_MUX_POLARITY_INVERTED BIT(3) /* Polarity inverted */
/* Mux modes, decoded to attributes */
enum tcpc_mux_mode {
- TYPEC_MUX_NONE = 0, /* Open switch */
- TYPEC_MUX_USB = TCPC_MUX_USB_ENABLED, /* USB only */
- TYPEC_MUX_DP = TCPC_MUX_DP_ENABLED, /* DP only */
- TYPEC_MUX_DOCK = TCPC_MUX_USB_ENABLED | /* Both USB and DP */
- TCPC_MUX_DP_ENABLED,
+ /* Open switch */
+ TYPEC_MUX_NONE = 0,
+ /* USB device only */
+ TYPEC_MUX_USB_DEVICE = TCPC_MUX_USB_DEVICE_ENABLED,
+ /* USB host only */
+ TYPEC_MUX_USB_HOST = TCPC_MUX_USB_HOST_ENABLED,
+ /* DP source only */
+ TYPEC_MUX_DP = TCPC_MUX_DP_SRC_ENABLED,
+ /* Both USB host and DP source */
+ TYPEC_MUX_DOCK = TCPC_MUX_USB_HOST_ENABLED | TCPC_MUX_DP_SRC_ENABLED,
};
struct tcpc_mux_dev {
--
2.13.5
next prev parent reply other threads:[~2017-09-01 21:49 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-01 21:48 [PATCH 00/11] mux/typec: Add USB / TypeC mux drivers and hook them up on some x86 systems Hans de Goede
2017-09-01 21:48 ` [PATCH 01/11] mux: core: Add of_mux_control_get helper function Hans de Goede
2017-09-01 21:48 ` [PATCH 02/11] mux: core: Add support for getting a mux controller on a non DT platform Hans de Goede
2017-09-02 19:13 ` sathya
2017-09-04 14:21 ` Hans de Goede
2017-09-04 11:19 ` Peter Rosin
2017-09-05 10:58 ` Hans de Goede
2017-09-01 21:48 ` [PATCH 03/11] mux: consumer.h: Add MUX_USB_* state constant defines Hans de Goede
2017-09-02 10:10 ` Andy Shevchenko
2017-09-02 11:59 ` Hans de Goede
2017-09-02 14:59 ` Guenter Roeck
2017-09-02 15:59 ` Hans de Goede
2017-09-02 19:06 ` Guenter Roeck
2017-09-02 19:46 ` Hans de Goede
2017-09-01 21:48 ` [PATCH 04/11] usb: xhci: Add Intel cherrytrail extended cap / otg phy mux handling Hans de Goede
2017-09-04 7:31 ` Heikki Krogerus
2017-09-05 10:06 ` Hans de Goede
2017-09-01 21:48 ` [PATCH 05/11] mux: Add Intel Cherrytrail USB mux driver Hans de Goede
2017-09-02 10:19 ` Andy Shevchenko
2017-09-02 10:37 ` Dan Carpenter
2017-09-04 14:07 ` Hans de Goede
2017-09-04 11:19 ` Peter Rosin
2017-09-05 11:09 ` Hans de Goede
2017-09-01 21:48 ` [PATCH 06/11] mux: Add Pericom PI3USB30532 Type-C " Hans de Goede
2017-09-04 11:19 ` Peter Rosin
2017-09-05 7:46 ` Peter Rosin
2017-09-01 21:48 ` [PATCH 07/11] extcon: intel-int3496: Add support for controlling the USB-role mux Hans de Goede
2017-09-02 10:39 ` Andy Shevchenko
2017-09-04 14:11 ` Hans de Goede
2017-09-01 21:48 ` Hans de Goede [this message]
2017-09-01 21:48 ` [PATCH 09/11] staging: typec: Add Generic TCPC mux driver using the mux subsys Hans de Goede
2017-09-01 21:48 ` [PATCH 10/11] staging: typec: fusb302: Hook up mux support using tcpc_gen_mux support Hans de Goede
2017-09-01 21:48 ` [PATCH 11/11] platform/x86: intel_cht_int33fe: Add mux mappings for the Type-C port Hans de Goede
2017-09-02 10:42 ` Andy Shevchenko
2017-09-04 14:20 ` Hans de Goede
2017-09-04 11:18 ` [PATCH 00/11] mux/typec: Add USB / TypeC mux drivers and hook them up on some x86 systems Peter Rosin
2017-09-05 10:54 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170901214845.7153-9-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=cw00.choi@samsung.com \
--cc=devel@driverdev.osuosl.org \
--cc=dvhart@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mathias.nyman@intel.com \
--cc=myungjoo.ham@samsung.com \
--cc=peda@axentia.se \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=sathyaosid@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome