From: Colin King <colin.king@canonical.com>
To: Joao Pinto <jpinto@synopsys.com>,
Vinayak Holikatti <vinholikatti@gmail.com>,
"James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] scsi: ufs: tc-dwc-g210: make arrays static, reduces object code size
Date: Tue, 12 Sep 2017 12:32:28 +0100 [thread overview]
Message-ID: <20170912113228.1389-1-colin.king@canonical.com> (raw)
From: Colin Ian King <colin.king@canonical.com>
Don't populate const arrays on the stack, instead make them
static. Makes the object code smaller by over 740 bytes.
Before:
text data bss dec hex filename
3840 208 0 4048 fd0 drivers/scsi/ufs/tc-dwc-g210.o
After:
text data bss dec hex filename
2679 624 0 3303 ce7 drivers/scsi/ufs/tc-dwc-g210.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/scsi/ufs/tc-dwc-g210.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/scsi/ufs/tc-dwc-g210.c
index dc03e47f7c58..3a8bc6d9cb5b 100644
--- a/drivers/scsi/ufs/tc-dwc-g210.c
+++ b/drivers/scsi/ufs/tc-dwc-g210.c
@@ -26,7 +26,7 @@
*/
static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
{
- const struct ufshcd_dme_attr_val setup_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
{ UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
@@ -90,7 +90,7 @@ static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
*/
static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
{
- const struct ufshcd_dme_attr_val setup_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
DME_LOCAL },
{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
@@ -147,7 +147,7 @@ static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
int connected_tx_lanes = 0;
int ret = 0;
- const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
DME_LOCAL },
{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
@@ -158,7 +158,7 @@ static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
DME_LOCAL },
};
- const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
DME_LOCAL },
{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
@@ -222,7 +222,7 @@ static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba)
{
int ret = 0;
- const struct ufshcd_dme_attr_val setup_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
{ UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
--
2.14.1
next reply other threads:[~2017-09-12 11:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-12 11:32 Colin King [this message]
2017-09-12 15:10 ` Bart Van Assche
2017-09-15 19:42 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170912113228.1389-1-colin.king@canonical.com \
--to=colin.king@canonical.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=jpinto@synopsys.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®