From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751973AbdITEqc (ORCPT ); Wed, 20 Sep 2017 00:46:32 -0400 Received: from fldsmtpe03.verizon.com ([140.108.26.142]:30759 "EHLO fldsmtpe03.verizon.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751938AbdITEq2 (ORCPT ); Wed, 20 Sep 2017 00:46:28 -0400 From: "Levin, Alexander (Sasha Levin)" Cc: Hans de Goede , Chanwoo Choi , "Levin, Alexander (Sasha Levin)" X-Host: challenger.odc.vzwcorp.com To: "linux-kernel@vger.kernel.org" , "stable@vger.kernel.org" Subject: [PATCH review for 4.4 10/47] extcon: axp288: Use vbus-valid instead of -present to determine cable presence Thread-Topic: [PATCH review for 4.4 10/47] extcon: axp288: Use vbus-valid instead of -present to determine cable presence Thread-Index: AQHTMcs429VwUf7V3EeZGiV551/pyA== Date: Wed, 20 Sep 2017 04:45:02 +0000 Message-ID: <20170920044445.7392-10-alexander.levin@verizon.com> References: <20170920044445.7392-1-alexander.levin@verizon.com> In-Reply-To: <20170920044445.7392-1-alexander.levin@verizon.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.144.60.250] Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by nfs id v8K4kagN021261 From: Hans de Goede [ Upstream commit 5757aca10146061befd168dab37fb0db1ccd8f73 ] The vbus-present bit in the power status register also gets set to 1 when a usb-host cable (id-pin shorted to ground) is plugged in and a 5v boost converter is supplying 5v to the otg usb bus. This causes a "disconnect or unknown or ID event" warning in dmesg as well as the extcon device to report the last detected charger cable type as being connected even though none is connected. This commit switches to checking the vbus-valid bit instead, which is only 1 when both vbus is present and the vbus-path is enabled in the vbus-path control register (the vbus-path gets disabled when a usb-host cable is detected, to avoid the pmic drawing power from the 5v boost converter). Signed-off-by: Hans de Goede Acked-by: Chanwoo Choi Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin --- drivers/extcon/extcon-axp288.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index fd55c2f2080a..6c9d7ccebb8c 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -168,7 +168,7 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) return ret; } - vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT); + vbus_attach = (pwr_stat & PS_STAT_VBUS_VALID); if (!vbus_attach) goto notify_otg; -- 2.11.0