From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752436AbdIVSnj (ORCPT ); Fri, 22 Sep 2017 14:43:39 -0400 Received: from mail-wm0-f65.google.com ([74.125.82.65]:34956 "EHLO mail-wm0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752263AbdIVSnK (ORCPT ); Fri, 22 Sep 2017 14:43:10 -0400 X-Google-Smtp-Source: AOwi7QAm7X1vsCjds1rfNx2qeOnf3eJddog5NkgHMvCDXXekLx5OcW/GtSwCRVf2s0vdmpARmcO1nw== From: Corentin Labbe To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, maxime.ripard@free-electrons.com, wens@csie.org, catalin.marinas@arm.com, will.deacon@arm.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe Subject: [PATCH v2 12/12] ARM: dts: sun8i: a83t: Fix simple-bus unit address format error Date: Fri, 22 Sep 2017 20:40:45 +0200 Message-Id: <20170922184045.6498-13-clabbe.montjoie@gmail.com> X-Mailer: git-send-email 2.13.5 In-Reply-To: <20170922184045.6498-1-clabbe.montjoie@gmail.com> References: <20170922184045.6498-1-clabbe.montjoie@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch remove leading 0 of unit address and so remove lots of warning when building DT with W=1. Signed-off-by: Corentin Labbe Acked-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 7f99ef37f61f..dd6a393725c6 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -248,7 +248,7 @@ status = "disabled"; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; @@ -436,7 +436,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -447,7 +447,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; -- 2.13.5