From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
maxime.ripard@free-electrons.com, wens@csie.org,
catalin.marinas@arm.com, will.deacon@arm.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH v3 10/14] arm64: allwinner: a64: Fix simple-bus unit address format error
Date: Tue, 26 Sep 2017 09:22:30 +0200 [thread overview]
Message-ID: <20170926072234.27481-11-clabbe.montjoie@gmail.com> (raw)
In-Reply-To: <20170926072234.27481-1-clabbe.montjoie@gmail.com>
This patch remove leading 0 of unit address and so remove
lots of warning when building DT with W=1.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e30476f05802..662e8b7981b5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -190,7 +190,7 @@
status = "disabled";
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -203,7 +203,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1a800 0x4>,
@@ -223,7 +223,7 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -235,7 +235,7 @@
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -245,7 +245,7 @@
status = "disabled";
};
- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
status = "disabled";
};
- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -271,7 +271,7 @@
status = "disabled";
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -472,7 +472,7 @@
};
- spi0: spi@01c68000 {
+ spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -487,7 +487,7 @@
#size-cells = <0>;
};
- spi1: spi@01c69000 {
+ spi1: spi@1c69000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -560,7 +560,7 @@
#reset-cells = <1>;
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
--
2.13.5
next prev parent reply other threads:[~2017-09-26 7:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 7:22 [PATCH v3 00/14] ARM: dts: sunxi: Fix DT build warnings Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 01/14] ARM: dts: sunxi: h3/h5: Fix simple-bus unit address format error Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 02/14] ARM: dts: sunxi: h3/h5: Fix i2c2 register address Corentin Labbe
2018-08-01 13:11 ` Icenowy Zheng
2017-09-26 7:22 ` [PATCH v3 03/14] ARM: dts: sunxi: h3/h5: Fix node with unit name and no reg property Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 04/14] ARM: dts: nanopi: " Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 05/14] ARM: dts: orangepi2: " Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 06/14] ARM: dts: sun8i: orangepi-lite: " Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 07/14] ARM: dts: sun8i: orangepi one: " Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 08/14] ARM: dts: sun8i: orangepipc: " Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 09/14] ARM: dts: sun8i: orangepi-plus: " Corentin Labbe
2017-09-26 7:22 ` Corentin Labbe [this message]
2017-09-26 7:22 ` [PATCH v3 11/14] arm64: allwinner: a64: " Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 12/14] ARM: dts: sun8i: a83t: Fix simple-bus unit address format error Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 13/14] arm64: allwinner: a64: fix pin name Corentin Labbe
2017-09-26 7:46 ` Chen-Yu Tsai
2017-09-26 7:53 ` Corentin Labbe
2017-09-26 7:22 ` [PATCH v3 14/14] ARM: dts: sun8i: " Corentin Labbe
2017-09-26 7:48 ` [PATCH v3 00/14] ARM: dts: sunxi: Fix DT build warnings Chen-Yu Tsai
2017-09-26 8:58 ` Maxime Ripard
2017-09-26 13:01 ` Chen-Yu Tsai
2017-09-27 15:18 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170926072234.27481-11-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®