mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Wim Van Sebroeck <wim@iguana.be>,
	Dinh Nguyen <dinguyen@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-watchdog@vger.kernel.org, kernel@pengutronix.de,
	Russell King <linux@armlinux.org.uk>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/2] watchdog: dw_wdt: add stop watchdog operation
Date: Tue, 26 Sep 2017 08:13:09 -0700	[thread overview]
Message-ID: <20170926151309.GA14894@roeck-us.net> (raw)
In-Reply-To: <20170926061123.29614-1-o.rempel@pengutronix.de>

On Tue, Sep 26, 2017 at 08:11:22AM +0200, Oleksij Rempel wrote:
> The only way of stopping the watchdog is by resetting it.
> Add the watchdog op for stopping the device and reset if
> a reset line is provided.
> 
> At same time WDOG_HW_RUNNING should be remove from dw_wdt_start.
> As commented by Guenter Roeck:
> dw_wdt sets WDOG_HW_RUNNING in its open function. Result is
> that the kref_get() in watchdog_open() won't be executed. But then
> kref_put() in close will be called since the watchdog now does stop.
> This causes the imbalance.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: Wim Van Sebroeck <wim@iguana.be>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: linux-watchdog@vger.kernel.org

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> 
> changes v4:
>  - remove WDOG_HW_RUNNING from dw_wdt_start.
> 
> changes v3:
>  - don't return error if rst is not present and set WDOG_HW_RUNNING bit
>    to notify watchdog core.
> 
> changes v2:
>  - test if dw_wdt->rst is NULL instead of IS_ERR
> 
>  drivers/watchdog/dw_wdt.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
> index 36be987ff9ef..c2f4ff516230 100644
> --- a/drivers/watchdog/dw_wdt.c
> +++ b/drivers/watchdog/dw_wdt.c
> @@ -127,14 +127,27 @@ static int dw_wdt_start(struct watchdog_device *wdd)
>  
>  	dw_wdt_set_timeout(wdd, wdd->timeout);
>  
> -	set_bit(WDOG_HW_RUNNING, &wdd->status);
> -
>  	writel(WDOG_CONTROL_REG_WDT_EN_MASK,
>  	       dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
>  
>  	return 0;
>  }
>  
> +static int dw_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
> +
> +	if (!dw_wdt->rst) {
> +		set_bit(WDOG_HW_RUNNING, &wdd->status);
> +		return 0;
> +	}
> +
> +	reset_control_assert(dw_wdt->rst);
> +	reset_control_deassert(dw_wdt->rst);
> +
> +	return 0;
> +}
> +
>  static int dw_wdt_restart(struct watchdog_device *wdd,
>  			  unsigned long action, void *data)
>  {
> @@ -173,6 +186,7 @@ static const struct watchdog_info dw_wdt_ident = {
>  static const struct watchdog_ops dw_wdt_ops = {
>  	.owner		= THIS_MODULE,
>  	.start		= dw_wdt_start,
> +	.stop		= dw_wdt_stop,
>  	.ping		= dw_wdt_ping,
>  	.set_timeout	= dw_wdt_set_timeout,
>  	.get_timeleft	= dw_wdt_get_timeleft,
> -- 
> 2.11.0
> 

      parent reply	other threads:[~2017-09-26 15:13 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-26  6:11 Oleksij Rempel
2017-09-26  6:11 ` [PATCH v4 2/2] ARM: socfpga: dtsi: add dw-wdt reset lines Oleksij Rempel
2017-09-26 15:13 ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170926151309.GA14894@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=o.rempel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®