From: Wenyou Yang <wenyou.yang@microchip.com>
To: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: <linux-kernel@vger.kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
"Jonathan Corbet" <corbet@lwn.net>,
Hans Verkuil <hverkuil@xs4all.nl>,
<linux-arm-kernel@lists.infradead.org>,
Linux Media Mailing List <linux-media@vger.kernel.org>,
Wenyou Yang <wenyou.yang@microchip.com>
Subject: [PATCH v3 2/5] media: atmel-isc: Add prepare and unprepare ops
Date: Thu, 28 Sep 2017 16:18:25 +0800 [thread overview]
Message-ID: <20170928081828.20335-3-wenyou.yang@microchip.com> (raw)
In-Reply-To: <20170928081828.20335-1-wenyou.yang@microchip.com>
A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc-regs.h | 1 +
drivers/media/platform/atmel/atmel-isc.c | 30 +++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 6936ac467609..93e58fcf1d5f 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -42,6 +42,7 @@
/* ISC Clock Status Register */
#define ISC_CLKSR 0x00000020
+#define ISC_CLKSR_SIP BIT(31)
#define ISC_CLK(n) BIT(n)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 991f962b7023..0b15dc1a3a0b 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -308,6 +308,34 @@ module_param(sensor_preferred, uint, 0644);
MODULE_PARM_DESC(sensor_preferred,
"Sensor is preferred to output the specified format (1-on 0-off), default 1");
+static int isc_wait_clk_stable(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ struct regmap *regmap = isc_clk->regmap;
+ unsigned long timeout = jiffies + usecs_to_jiffies(1000);
+ unsigned int status;
+
+ while (time_before(jiffies, timeout)) {
+ regmap_read(regmap, ISC_CLKSR, &status);
+ if (!(status & ISC_CLKSR_SIP))
+ return 0;
+
+ usleep_range(10, 250);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int isc_clk_prepare(struct clk_hw *hw)
+{
+ return isc_wait_clk_stable(hw);
+}
+
+static void isc_clk_unprepare(struct clk_hw *hw)
+{
+ isc_wait_clk_stable(hw);
+}
+
static int isc_clk_enable(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
@@ -459,6 +487,8 @@ static int isc_clk_set_rate(struct clk_hw *hw,
}
static const struct clk_ops isc_clk_ops = {
+ .prepare = isc_clk_prepare,
+ .unprepare = isc_clk_unprepare,
.enable = isc_clk_enable,
.disable = isc_clk_disable,
.is_enabled = isc_clk_is_enabled,
--
2.13.0
next prev parent reply other threads:[~2017-09-28 8:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-28 8:18 [PATCH v3 0/5] media: atmel-isc: Rework the format list and clock provider Wenyou Yang
2017-09-28 8:18 ` [PATCH v3 1/5] media: atmel-isc: Add spin lock for clock enable ops Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang [this message]
2017-09-28 8:18 ` [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe Wenyou Yang
2017-09-28 21:25 ` Sakari Ailus
2017-10-09 5:49 ` Yang, Wenyou
2017-10-09 7:58 ` Sakari Ailus
2017-10-09 10:01 ` Yang, Wenyou
2017-09-28 8:18 ` [PATCH v3 4/5] media: atmel-isc: Remove unnecessary member Wenyou Yang
2017-09-28 8:18 ` [PATCH v3 5/5] media: atmel-isc: Rework the format list Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170928081828.20335-3-wenyou.yang@microchip.com \
--to=wenyou.yang@microchip.com \
--cc=corbet@lwn.net \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@s-opensource.com \
--cc=nicolas.ferre@microchip.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome