From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751255AbdJEAGb (ORCPT ); Wed, 4 Oct 2017 20:06:31 -0400 Received: from p3plsmtpa12-09.prod.phx3.secureserver.net ([68.178.252.238]:41136 "EHLO p3plsmtpa12-09.prod.phx3.secureserver.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751120AbdJEAG3 (ORCPT ); Wed, 4 Oct 2017 20:06:29 -0400 From: Leon Luo To: mchehab@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, hans.verkuil@cisco.com, sakari.ailus@linux.intel.com Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, leonl@leopardimaging.com, soren.brinkmann@xilinx.com Subject: [PATCH v8 1/2] media:imx274 device tree binding file Date: Wed, 4 Oct 2017 17:06:20 -0700 Message-Id: <20171005000621.27841-1-leonl@leopardimaging.com> X-Mailer: git-send-email 2.14.0.rc1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-CMAE-Envelope: MS4wfJFC4t4qNU7ZFcD7QN2RutTiQ5XwcAv1pWtS7jDo23GSAXDd52WM3VppnBFe6an61epbmhy58lMIFCBuRmoQfk6iXO409QIdATsohi/VfblUWMcbaAMb Q4cjInvWBwkv1RqSEp8fnShb+u6P2277FvsmMDo3dpH+MMwJOeZOcgyDD262j1ldzylOTlGmSDg+0mqqKE+BdK0n3dmTBQn3o4Iqd1eGjehGIG5MuvXSrY9j Kio8euNVRPP3VyUtG8y9rPJMNQ2PY72cdvhuZnnicCpQV/QzZMbtI54S60g4Rktw2UH/BeZ0j+UYUqaH5qTOTGdEwVtXeApvMIoPxkj8RLLRw3n4oJaJLKbn PtpKek0pUENzDTCjUxaRU28g0Jj1Tb7wEoDyuKFr27L8xnIfHB5WqpgJVVu0c4Sr3nMWDuYRJh2ZmwMSWHPXg4Zxw2dcfKO5DZzXSAZgGjzpP9J+zJO6Z0nR X/vvxLDPm+Lq7WSBV7VWaoL86KouUEWW192K7u+z8pWvWzBzJ2/J970ODrE= Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The binding file for imx274 CMOS sensor V4l2 driver Signed-off-by: Leon Luo Acked-by: Sören Brinkmann Acked-by: Rob Herring --- v8: - no changes v7: - no changes v6: - no changes v5: - add 'port' and 'endpoint' information v4: - no changes v3: - remove redundant properties and references - document 'reg' property v2: - no changes --- .../devicetree/bindings/media/i2c/imx274.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt new file mode 100644 index 000000000000..80f2e89568e1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -0,0 +1,33 @@ +* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor + +The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 3864H x 2202V. It is programmable through I2C +interface. The I2C address is fixed to 0x1a as per sensor data sheet. +Image data is sent through MIPI CSI-2, which is configured as 4 lanes +at 1440 Mbps. + + +Required Properties: +- compatible: value should be "sony,imx274" for imx274 sensor +- reg: I2C bus address of the device + +Optional Properties: +- reset-gpios: Sensor reset GPIO + +The imx274 device node should contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio_sensor 0 0>; + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; -- 2.14.0.rc1