From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932065AbdJIWrU (ORCPT ); Mon, 9 Oct 2017 18:47:20 -0400 Received: from gate2.alliedtelesis.co.nz ([202.36.163.20]:42793 "EHLO gate2.alliedtelesis.co.nz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755566AbdJIWrP (ORCPT ); Mon, 9 Oct 2017 18:47:15 -0400 From: Chris Packham To: robh+dt@kernel.org, mark.rutland@arm.com, gregkh@linuxfoundation.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Chris Packham Subject: [PATCH v3 3/5] uio: dt-bindings: Add binding for "marvell,88e2040" Date: Tue, 10 Oct 2017 11:46:53 +1300 Message-Id: <20171009224655.6173-4-chris.packham@alliedtelesis.co.nz> X-Mailer: git-send-email 2.14.2 In-Reply-To: <20171009224655.6173-1-chris.packham@alliedtelesis.co.nz> References: <20171009224655.6173-1-chris.packham@alliedtelesis.co.nz> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The marvell,88e2040 is a N-BaseT Ethernet PHY which requires a userspace driver. The only kernel presence is an interrupt handler which uio_pdrv_genirq can provide. Signed-off-by: Chris Packham --- Changes in v3: - (replaces "uio: dt-bindings: document binding for uio-pdrv-genirq") - split the bindings up into the devices I'm actually wanting to support. The second is a marvell N-BaseT Ethernet PHY Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt index fb4c1b5059f2..7b28bead4016 100644 --- a/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt +++ b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt @@ -1,8 +1,8 @@ *Generic UIO platform driver with interrupts Required properties: -- compatible: Should be a value set with the of_id module parameter or the - built in value "st,stm32f100". +- compatible: Should be a value set with the of_id module parameter or one of + the built in values "st,stm32f100", "marvell,88e2040". Optional properties: - interrupts: Should contain the interrupt to be associated with this device -- 2.14.2