From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966969AbdJRIcD (ORCPT ); Wed, 18 Oct 2017 04:32:03 -0400 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:57782 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S936237AbdJRIbr (ORCPT ); Wed, 18 Oct 2017 04:31:47 -0400 From: Chen-Yu Tsai To: Lee Jones , Maxime Ripard Cc: Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Quentin Schulz Subject: [PATCH v2 7/8] ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 Date: Wed, 18 Oct 2017 16:31:37 +0800 Message-Id: <20171018083138.14517-8-wens@csie.org> X-Mailer: git-send-email 2.14.2 In-Reply-To: <20171018083138.14517-1-wens@csie.org> References: <20171018083138.14517-1-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The WiFi side of the AP6330 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. For the WiFi module to correctly detect the frequency of its main oscillator, the external low power clock must be set to 32768 Hz. Their does not seem to be proper out-of-band interrupt support for the BCM4330 chip within the AP6330 module. This part is left out for now. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index bd53e5748991..7f0a3f6d0cf2 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -131,6 +131,17 @@ #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* The WiFi low power clock must be 32768 Hz */ + assigned-clocks = <&ac100_rtc 1>; + assigned-clock-rates = <32768>; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -153,6 +164,15 @@ status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_sw>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; -- 2.14.2