From: Carlo Caione <carlo@caione.org>
To: linux@endlessm.com, bardliao@realtek.com, oder_chiou@realtek.com,
pierre-louis.bossart@linux.intel.com, broonie@kernel.org,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
tiwai@suse.com, albertchen@realtek.com, edgar_shen@realtek.com
Cc: Carlo Caione <carlo@endlessm.com>
Subject: [PATCH 2/2] ASoC: intel: byt: Add headset jack
Date: Thu, 19 Oct 2017 12:03:23 +0100 [thread overview]
Message-ID: <20171019110323.23751-3-carlo@caione.org> (raw)
In-Reply-To: <20171019110323.23751-1-carlo@caione.org>
From: Carlo Caione <carlo@endlessm.com>
Introduce an headset jack in the machine driver and register it to the
codec driver.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
sound/soc/intel/boards/bytcr_rt5651.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 1dad5c98c9ef..0fc850e20fc0 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -49,6 +49,8 @@ struct byt_rt5651_private {
struct clk *mclk;
};
+static struct snd_soc_jack jack;
+
static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP |
BYT_RT5651_DMIC_EN |
BYT_RT5651_MCLK_EN;
@@ -177,6 +179,17 @@ static const struct snd_kcontrol_new byt_rt5651_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
};
+static struct snd_soc_jack_pin bytcr_jack_pins[] = {
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -244,6 +257,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
{
struct snd_soc_card *card = runtime->card;
+ struct snd_soc_codec *codec = runtime->codec;
struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
const struct snd_soc_dapm_route *custom_map;
int num_routes;
@@ -301,6 +315,16 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
dev_err(card->dev, "unable to set MCLK rate\n");
}
+ ret = snd_soc_card_jack_new(runtime->card, "Headset",
+ SND_JACK_HEADSET, &jack,
+ bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins));
+ if (ret) {
+ dev_err(runtime->dev, "Headset jack creation failed %d\n", ret);
+ return ret;
+ }
+
+ rt5651_set_jack_detect(codec, &jack);
+
return ret;
}
--
2.14.2
next prev parent reply other threads:[~2017-10-19 11:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 11:03 [PATCH 0/2] rt5651: Enable jack detection Carlo Caione
2017-10-19 11:03 ` [PATCH 1/2] ASoC: rt5651: Enable jack detection on JD1_1 Carlo Caione
2017-10-19 15:47 ` [alsa-devel] " Pierre-Louis Bossart
2017-10-19 15:54 ` Carlo Caione
2017-10-20 2:10 ` Bard Liao
2017-10-20 2:23 ` Bard Liao
2017-10-19 11:03 ` Carlo Caione [this message]
2017-10-19 15:56 ` [PATCH 2/2] ASoC: intel: byt: Add headset jack Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171019110323.23751-3-carlo@caione.org \
--to=carlo@caione.org \
--cc=albertchen@realtek.com \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=carlo@endlessm.com \
--cc=edgar_shen@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@endlessm.com \
--cc=oder_chiou@realtek.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®