From: Gustavo Padovan <gustavo@padovan.org>
To: linux-media@vger.kernel.org
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Shuah Khan <shuahkh@osg.samsung.com>,
Pawel Osciak <pawel@osciak.com>,
Alexandre Courbot <acourbot@chromium.org>,
Sakari Ailus <sakari.ailus@iki.fi>,
Brian Starkey <brian.starkey@arm.com>,
linux-kernel@vger.kernel.org,
Gustavo Padovan <gustavo.padovan@collabora.com>
Subject: [RFC v4 05/17] [media] v4l: add V4L2_EVENT_OUT_FENCE event
Date: Fri, 20 Oct 2017 19:50:00 -0200 [thread overview]
Message-ID: <20171020215012.20646-6-gustavo@padovan.org> (raw)
In-Reply-To: <20171020215012.20646-1-gustavo@padovan.org>
From: Gustavo Padovan <gustavo.padovan@collabora.com>
Add a new event the userspace can subscribe to receive notifications
of the out_fence_fd when a buffer is queued onto the driver.
The event provides the index of the queued buffer and the out_fence_fd.
v3: - Rename event to V4L2_EVENT_OUT_FENCE
v2: - Add missing Documentation (Mauro)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
Documentation/media/uapi/v4l/vidioc-dqevent.rst | 23 +++++++++++++++++++++++
Documentation/media/videodev2.h.rst.exceptions | 1 +
include/uapi/linux/videodev2.h | 12 ++++++++++++
3 files changed, 36 insertions(+)
diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
index cb3565f36793..2143df63aeb1 100644
--- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst
+++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
@@ -79,6 +79,10 @@ call.
- ``src_change``
- Event data for event V4L2_EVENT_SOURCE_CHANGE.
* -
+ - struct :c:type:`v4l2_event_buf_queued`
+ - ``buf_queued``
+ - Event data for event V4L2_EVENT_OUT_FENCE.
+ * -
- __u8
- ``data``\ [64]
- Event data. Defined by the event type. The union should be used to
@@ -338,6 +342,25 @@ call.
each cell in the motion detection grid, then that all cells are
automatically assigned to the default region 0.
+.. c:type:: v4l2_event_out_fence
+
+.. flat-table:: struct v4l2_event_out_fence
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``index``
+ - The index of the buffer that was queued to the driver.
+ * - __s32
+ - ``out_fence_fd``
+ - The out-fence file descriptor of the buffer that was queued to
+ the driver. It will signal when the buffer is ready, or if an
+ error happens.
+
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index a5cb0a8686ac..32f3d5b37e3a 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -462,6 +462,7 @@ replace define V4L2_EVENT_CTRL event-type
replace define V4L2_EVENT_FRAME_SYNC event-type
replace define V4L2_EVENT_SOURCE_CHANGE event-type
replace define V4L2_EVENT_MOTION_DET event-type
+replace define V4L2_EVENT_OUT_FENCE event-type
replace define V4L2_EVENT_PRIVATE_START event-type
replace define V4L2_EVENT_CTRL_CH_VALUE ctrl-changes-flags
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 185d6a0acc06..2a432e8c18e3 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -2156,6 +2156,7 @@ struct v4l2_streamparm {
#define V4L2_EVENT_FRAME_SYNC 4
#define V4L2_EVENT_SOURCE_CHANGE 5
#define V4L2_EVENT_MOTION_DET 6
+#define V4L2_EVENT_OUT_FENCE 7
#define V4L2_EVENT_PRIVATE_START 0x08000000
/* Payload for V4L2_EVENT_VSYNC */
@@ -2208,6 +2209,16 @@ struct v4l2_event_motion_det {
__u32 region_mask;
};
+/**
+ * struct v4l2_event_out_fence - out fence fd event
+ * @index: index of the buffer queued in the driver
+ * @out_fence_fd: out-fence fd of the buffer queued
+ */
+struct v4l2_event_out_fence {
+ __u32 index;
+ __s32 out_fence_fd;
+};
+
struct v4l2_event {
__u32 type;
union {
@@ -2216,6 +2227,7 @@ struct v4l2_event {
struct v4l2_event_frame_sync frame_sync;
struct v4l2_event_src_change src_change;
struct v4l2_event_motion_det motion_det;
+ struct v4l2_event_out_fence out_fence;
__u8 data[64];
} u;
__u32 pending;
--
2.13.6
next prev parent reply other threads:[~2017-10-20 21:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-20 21:49 [RFC v4 00/17] V4L2 Explicit Synchronization support Gustavo Padovan
2017-10-20 21:49 ` [RFC v4 01/17] [media] v4l: create v4l2_event_subscribe_v4l2() Gustavo Padovan
2017-10-24 12:51 ` Hans Verkuil
2017-10-20 21:49 ` [RFC v4 02/17] [media] v4l: use v4l2_subscribe_event_v4l2() on vtables Gustavo Padovan
2017-10-20 21:49 ` [RFC v4 03/17] [media] v4l: use v4l2_subscribe_event_v4l2() on drivers Gustavo Padovan
2017-10-20 21:49 ` [RFC v4 04/17] WIP: [media] v4l2: add v4l2_event_queue_fh_with_cb() Gustavo Padovan
2017-11-03 7:31 ` Hans Verkuil
2017-10-20 21:50 ` Gustavo Padovan [this message]
2017-10-24 13:09 ` [RFC v4 05/17] [media] v4l: add V4L2_EVENT_OUT_FENCE event Hans Verkuil
2017-10-20 21:50 ` [RFC v4 06/17] [media] vb2: add .send_out_fence() to notify userspace of out_fence_fd Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 07/17] [media] vivid: assign the specific device to the vb2_queue->dev Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 08/17] [media] vb2: add 'ordered_in_driver' property to queues Gustavo Padovan
2017-10-24 13:11 ` Hans Verkuil
2017-10-20 21:50 ` [RFC v4 09/17] [media] vb2: add 'ordered_in_vb2' " Gustavo Padovan
2017-11-03 7:23 ` Hans Verkuil
2017-10-20 21:50 ` [RFC v4 10/17] [media] vivid: mark vivid queues as ordered_in_driver Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 11/17] [media] vb2: check earlier if stream can be started Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 12/17] [media] vb2: add explicit fence user API Gustavo Padovan
2017-11-03 7:47 ` Hans Verkuil
2017-10-20 21:50 ` [RFC v4 13/17] [media] vb2: add in-fence support to QBUF Gustavo Padovan
2017-10-25 14:49 ` Brian Starkey
2017-11-10 12:38 ` Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 14/17] [media] vb2: add videobuf2 dma-buf fence helpers Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 15/17] [media] vb2: add infrastructure to support out-fences Gustavo Padovan
2017-10-27 9:41 ` Brian Starkey
2017-10-20 21:50 ` [RFC v4 16/17] [media] vb2: add out-fence support to QBUF Gustavo Padovan
2017-10-27 10:01 ` Brian Starkey
2017-11-03 0:03 ` Gustavo Padovan
2017-10-20 21:50 ` [RFC v4 17/17] [media] v4l: Document explicit synchronization behaviour Gustavo Padovan
2017-10-27 10:08 ` Brian Starkey
2017-11-03 7:53 ` Hans Verkuil
2017-11-03 13:32 ` Gustavo Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171020215012.20646-6-gustavo@padovan.org \
--to=gustavo@padovan.org \
--cc=acourbot@chromium.org \
--cc=brian.starkey@arm.com \
--cc=gustavo.padovan@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
--cc=pawel@osciak.com \
--cc=sakari.ailus@iki.fi \
--cc=shuahkh@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®