From: Shikhar Dogra <shidogra@cisco.com>
To: jarkko.nikula@linux.intel.com, andriy.shevchenko@linux.intel.com,
mika.westerberg@linux.intel.com, wsa@the-dreams.de
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
xe-linux-external@cisco.com
Subject: [PATCH] i2c: designware: make *CNT values configurable
Date: Wed, 25 Oct 2017 11:50:22 -0700 [thread overview]
Message-ID: <20171025185022.GA25920@sjc-ads-4188.cisco.com> (raw)
The values are already configurable from ACPI.
This patch makes the high count (HCNT) and low count (LCNT)
register values configurable through device tree.
Cc: xe-linux-external@cisco.com
Signed-off-by: Shikhar Dogra <shidogra@cisco.com>
---
Documentation/devicetree/bindings/i2c/i2c-designware.txt | 16 ++++++++++++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 12 ++++++++++++
2 files changed, 28 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fee26dc..2b9ddca 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -20,6 +20,18 @@ Optional properties :
- i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
This value which is by default 300ns is used to compute the tHIGH period.
+ - i2c-ss-hcnt : should contain the I2C controller standard speed HCNT value.
+ If this is not set we use the calculated and more conservative values.
+
+ - i2c-ss-lcnt : should contain the I2C controller standard speed LCNT value.
+ If this is not set we use the calculated and more conservative values.
+
+ - i2c-fs-hcnt : should contain the I2C controller fast speed HCNT value.
+ If this is not set we use the calculated and more conservative values.
+
+ - i2c-fs-lcnt : should contain the I2C controller fast speed LCNT value.
+ If this is not set we use the calculated and more conservative values.
+
Example :
i2c@f0000 {
@@ -42,4 +54,8 @@ Example :
i2c-sda-hold-time-ns = <300>;
i2c-sda-falling-time-ns = <300>;
i2c-scl-falling-time-ns = <300>;
+ i2c-ss-hcnt = /bits/ 16 <5000>;
+ i2c-ss-lcnt = /bits/ 16 <5000>;
+ i2c-fs-hcnt = /bits/ 16 <5000>;
+ i2c-fs-lcnt = /bits/ 16 <5000>;
};
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 6b00061c..25c3b0c 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -177,6 +177,18 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&clk_freq);
+ of_property_read_u16(pdev->dev.of_node,
+ "i2c-ss-hcnt", &dev->ss_hcnt);
+
+ of_property_read_u16(pdev->dev.of_node,
+ "i2c-ss-lcnt", &dev->ss_lcnt);
+
+ of_property_read_u16(pdev->dev.of_node,
+ "i2c-fs-hcnt", &dev->fs_hcnt);
+
+ of_property_read_u16(pdev->dev.of_node,
+ "i2c-fs-lcnt", &dev->fs_lcnt);
+
/* Only standard mode at 100kHz and fast mode at 400kHz
* are supported.
*/
--
2.7.4
next reply other threads:[~2017-10-25 18:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 18:50 Shikhar Dogra [this message]
2017-10-26 14:16 ` Jarkko Nikula
2017-11-03 17:23 ` Shikhar Dogra (shidogra)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171025185022.GA25920@sjc-ads-4188.cisco.com \
--to=shidogra@cisco.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=wsa@the-dreams.de \
--cc=xe-linux-external@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®