From: "Levin, Alexander (Sasha Levin)" <alexander.levin@one.verizon.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
"Levin,
Alexander (Sasha Levin)" <alexander.levin@one.verizon.com>
Subject: [PATCH AUTOSEL for-4.4 31/39] ixgbe: Reduce I2C retry count on X550 devices
Date: Wed, 8 Nov 2017 20:50:41 +0000 [thread overview]
Message-ID: <20171108205027.27525-31-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171108205027.27525-1-alexander.levin@verizon.com>
From: Tony Nguyen <anthony.l.nguyen@intel.com>
[ Upstream commit 3f0d646b720d541309b11e190db58086f446f41e ]
A retry count of 10 is likely to run into problems on X550 devices that
have to detect and reset unresponsive CS4227 devices. So, reduce the I2C
retry count to 3 for X550 and above. This should avoid any possible
regressions in existing devices.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index fb8673d63806..48d97cb730d8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -113,7 +113,7 @@ static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val, bool lock)
{
u32 swfw_mask = hw->phy.phy_semaphore_mask;
- int max_retry = 10;
+ int max_retry = 3;
int retry = 0;
u8 csum_byte;
u8 high_bits;
@@ -1764,6 +1764,8 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
u32 swfw_mask = hw->phy.phy_semaphore_mask;
bool nack = true;
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
max_retry = IXGBE_SFP_DETECT_RETRIES;
--
2.11.0
next prev parent reply other threads:[~2017-11-08 20:53 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-08 20:50 [PATCH AUTOSEL for-4.4 01/39] extcon: palmas: Check the parent instance to prevent the NULL Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 04/39] ARM: dts: Fix am335x and dm814x scm syscon to probe children Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 03/39] ARM: dts: Fix compatible for ti81xx uarts for 8250 Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 05/39] ARM: OMAP2+: Fix init for multiple quirks for the same SoC Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 02/39] fm10k: request reset when mbx->state changes Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 06/39] ARM: dts: Fix omap3 off mode pull defines Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 09/39] ata: SATA_MV should depend on HAS_DMA Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 07/39] ata: ATA_BMDMA " Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 08/39] ata: SATA_HIGHBANK " Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 13/39] igb: Fix hw_dbg logging in igb_update_flash_i210 Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 12/39] igb: close/suspend race in netif_device_detach Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 11/39] igb: reset the PHY before reading the PHY ID Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 10/39] drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 14/39] scsi: ufs-qcom: Fix module autoload Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 17/39] scsi: lpfc: Add missing memory barrier Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 16/39] staging: rtl8188eu: fix incorrect ERROR tags from logs Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 15/39] scsi: ufs: add capability to keep auto bkops always enabled Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 21/39] scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payload Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 18/39] scsi: lpfc: FCoE VPort enable-disable does not bring up the VPort Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 20/39] scsi: lpfc: Correct issue leading to oops during link reset Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 19/39] scsi: lpfc: Correct host name in symbolic_name field Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 25/39] backlight: adp5520: Fix error handling in adp5520_bl_probe() Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 22/39] ALSA: vx: Don't try to update capture stream before running Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 23/39] ALSA: vx: Fix possible transfer overflow Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 24/39] backlight: lcd: Fix race condition during register Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 27/39] ALSA: hda/realtek - Add new codec ID ALC299 Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 29/39] ixgbe: fix AER error handling Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 28/39] arm64: dts: NS2: reserve memory for Nitro firmware Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 26/39] gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` Levin, Alexander (Sasha Levin) [this message]
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 33/39] ixgbe: do not disable FEC from the driver Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 30/39] ixgbe: handle close/suspend race with netif_device_detach/present Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 32/39] ixgbe: add mask for 64 RSS queues Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 37/39] MIPS: init: Ensure reserved memory regions are not added to bootmem Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 36/39] MIPS: init: Ensure bootmem does not corrupt reserved memory Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 34/39] staging: rtl8712: fixed little endian problem Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 35/39] MIPS: End asm function prologue macros with .insn Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 38/39] MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR builds Levin, Alexander (Sasha Levin)
2017-11-08 20:50 ` [PATCH AUTOSEL for-4.4 39/39] MIPS: Use Makefile.postlink to insert relocations into vmlinux Levin, Alexander (Sasha Levin)
2017-11-09 9:16 ` Matt Redfearn
2017-11-09 16:42 ` Levin, Alexander (Sasha Levin)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171108205027.27525-31-alexander.levin@verizon.com \
--to=alexander.levin@one.verizon.com \
--cc=anthony.l.nguyen@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®