From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753527AbdKHV1I (ORCPT ); Wed, 8 Nov 2017 16:27:08 -0500 Received: from fllnx209.ext.ti.com ([198.47.19.16]:33584 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753173AbdKHV1D (ORCPT ); Wed, 8 Nov 2017 16:27:03 -0500 From: "Andrew F. Davis" To: Liam Girdwood , Mark Brown , Rob Herring , Mark Rutland , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren , Shawn Guo , Sascha Hauer CC: , , , "Andrew F . Davis" Subject: [PATCH 4/9] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin Date: Wed, 8 Nov 2017 15:25:00 -0600 Message-ID: <20171108212505.28320-5-afd@ti.com> X-Mailer: git-send-email 2.15.0 In-Reply-To: <20171108212505.28320-1-afd@ti.com> References: <20171108212505.28320-1-afd@ti.com> MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The correct DT property for specifying a GPIO used for reset is "reset-gpio", fix this here. Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by: Andrew F. Davis --- arch/arm/boot/dts/am335x-pepper.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 03c7d77023c6..d652abd76333 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -139,7 +139,7 @@ &audio_codec { status = "okay"; - gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; AVDD-supply = <&ldo3_reg>; IOVDD-supply = <&ldo3_reg>; DRVDD-supply = <&ldo3_reg>; -- 2.15.0