From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753475AbdKHV0I (ORCPT ); Wed, 8 Nov 2017 16:26:08 -0500 Received: from fllnx210.ext.ti.com ([198.47.19.17]:63178 "EHLO fllnx210.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753180AbdKHV0A (ORCPT ); Wed, 8 Nov 2017 16:26:00 -0500 From: "Andrew F. Davis" To: Liam Girdwood , Mark Brown , Rob Herring , Mark Rutland , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren , Shawn Guo , Sascha Hauer CC: , , , "Andrew F . Davis" Subject: [PATCH 5/9] ARM: dts: imx6: RDU2: Fix the audio CODEC's reset pin Date: Wed, 8 Nov 2017 15:25:01 -0600 Message-ID: <20171108212505.28320-6-afd@ti.com> X-Mailer: git-send-email 2.15.0 In-Reply-To: <20171108212505.28320-1-afd@ti.com> References: <20171108212505.28320-1-afd@ti.com> MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The correct DT property for specifying a GPIO used for reset is "reset-gpio", fix this here. Fixes: d763762e3b58 ("ARM: dts: imx6: add ZII RDU2 boards") Signed-off-by: Andrew F. Davis --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index eeb7679fd348..261e6896b286 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -337,7 +337,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; accel@1c { @@ -525,7 +525,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; }; touchscreen@20 { -- 2.15.0