Re: HiKey boot hangs with Linus' HEAD due to coresight dts changes?

[Leo Yan <leo.yan@linaro.org>]

Hi John,

On Thu, Nov 16, 2017 at 05:58:54PM -0800, John Stultz wrote:
> On Thu, Nov 16, 2017 at 5:54 PM, John Stultz <john.stultz@linaro.org> wrote:
> > Testing with Linus' HEAD today on the HiKey board, I started seeing boot hangs:
> > ...
> >
> > [    0.677971] Serial: AMBA PL011 UART driver
> > [    0.694299] pstore: using zlib compression
> > [    0.698830] console [pstore-1] enabled
> > [    0.702623] pstore: Registered ramoops as persistent store backend
> > [    0.708880] ramoops: attached 0x100000@0x21f00000, ecc: 0/0
> > [    0.715847] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7,
> > base_baud = 0) is a PL011 rev2
> > [    0.725011] uart-pl011 f7111000.uart: could not find pctldev for
> > node /soc/pinmux@f7010000/uart1_pmx_func, deferring probe
> > [    0.736375] uart-pl011 f7112000.uart: could not find pctldev for
> > node /soc/pinmux@f7010000/uart2_pmx_func, deferring probe
> > <hangs here>
> >
> > Bisecting this down, points to:
> >   0b79842775fa ("arm64: dts: hi6220: add coresight dt nodes")
> >
> > Reverting this patch makes things work again.
> >
> > Any ideas as to what might be wrong?
> >
> > Please let me know if I can test any fixes or provide any additional info.
> 
> If its helpful, the full tree I'm using (with the problematic patch
> reverted - as well as a few other needed fixups for recent
> regressions) is here:
>    https://git.linaro.org/people/john.stultz/android-dev.git
> dev/hikey-mainline-WIP
> 
> I'm using the "hikey_defconfig" added in the patchset to build with.

Could you check if below patch has been merged into your code base?

>From f71a1da256962fbaac48ce0ec01600a1a43f42a1 Mon Sep 17 00:00:00 2001
From: Leo Yan <leo.yan@linaro.org>
Date: Thu, 31 Aug 2017 20:36:47 +0800
Subject: [PATCH] clk: hi6220: mark clock cs_atb_syspll as critical

Clock cs_atb_syspll is pll used for coresight trace bus; when clock
cs_atb_syspll is disabled and operates its child clock node cs_atb
results in system hang. So mark clock cs_atb_syspll as critical to
keep it enabled.

Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 drivers/clk/hisilicon/clk-hi6220.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/hisilicon/clk-hi6220.c b/drivers/clk/hisilicon/clk-hi6220.c
index e786d71..a87809d 100644
--- a/drivers/clk/hisilicon/clk-hi6220.c
+++ b/drivers/clk/hisilicon/clk-hi6220.c
@@ -145,7 +145,7 @@ static struct hisi_gate_clock hi6220_separated_gate_clks_sys[] __initdata = {
 	{ HI6220_BBPPLL_SEL,    "bbppll_sel",    "pll0_bbp_gate",  CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 9,  0, },
 	{ HI6220_MEDIA_PLL_SRC, "media_pll_src", "pll_media_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 10, 0, },
 	{ HI6220_MMC2_SEL,      "mmc2_sel",      "mmc2_mux1",      CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 11, 0, },
-	{ HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll",         CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 12, 0, },
+	{ HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll",         CLK_SET_RATE_PARENT|CLK_IS_CRITICAL,   0x270, 12, 0, },
 };
 
 static struct hisi_mux_clock hi6220_mux_clks_sys[] __initdata = {
-- 
2.7.4