mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: Hans Verkuil <hverkuil@xs4all.nl>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: y2038@lists.linaro.org, Arnd Bergmann <arnd@arndb.de>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Vincent ABRIOU <vincent.abriou@st.com>,
	Ingo Molnar <mingo@kernel.org>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/8] [media] vivid: use ktime_t for timestamp calculation
Date: Mon, 27 Nov 2017 14:19:58 +0100	[thread overview]
Message-ID: <20171127132027.1734806-6-arnd@arndb.de> (raw)
In-Reply-To: <20171127132027.1734806-1-arnd@arndb.de>

timespec is generally deprecated because of the y2038 overflow.
In vivid, the usage is fine, since we are dealing with monotonic
timestamps, but we can also simplify the code by going to ktime_t.

Using ktime_divns() should be roughly as efficient as the old code,
since the constant 64-bit division gets turned into a multiplication
on modern platforms, and we save multiple 32-bit divisions that can be
expensive e.g. on ARMv7.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
I hope I understood the VIVID_RDS_GEN_BLOCKS calculation right,
please review carefully.
---
 drivers/media/platform/vivid/vivid-core.c     |  2 +-
 drivers/media/platform/vivid/vivid-core.h     |  2 +-
 drivers/media/platform/vivid/vivid-radio-rx.c | 11 +++++------
 drivers/media/platform/vivid/vivid-radio-tx.c |  8 +++-----
 drivers/media/platform/vivid/vivid-rds-gen.h  |  1 +
 5 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c
index 5f316a5e38db..a091cfd93164 100644
--- a/drivers/media/platform/vivid/vivid-core.c
+++ b/drivers/media/platform/vivid/vivid-core.c
@@ -995,7 +995,7 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
 
 	dev->edid_max_blocks = dev->edid_blocks = 2;
 	memcpy(dev->edid, vivid_hdmi_edid, sizeof(vivid_hdmi_edid));
-	ktime_get_ts(&dev->radio_rds_init_ts);
+	dev->radio_rds_init_time = ktime_get();
 
 	/* create all controls */
 	ret = vivid_create_controls(dev, ccs_cap == -1, ccs_out == -1, no_error_inj,
diff --git a/drivers/media/platform/vivid/vivid-core.h b/drivers/media/platform/vivid/vivid-core.h
index 5cdf95bdc4d1..d8bff4dcefb7 100644
--- a/drivers/media/platform/vivid/vivid-core.h
+++ b/drivers/media/platform/vivid/vivid-core.h
@@ -510,7 +510,7 @@ struct vivid_dev {
 
 	/* Shared between radio receiver and transmitter */
 	bool				radio_rds_loop;
-	struct timespec			radio_rds_init_ts;
+	ktime_t				radio_rds_init_time;
 
 	/* CEC */
 	struct cec_adapter		*cec_rx_adap;
diff --git a/drivers/media/platform/vivid/vivid-radio-rx.c b/drivers/media/platform/vivid/vivid-radio-rx.c
index 47c36c26096b..1b96cbd7f2ea 100644
--- a/drivers/media/platform/vivid/vivid-radio-rx.c
+++ b/drivers/media/platform/vivid/vivid-radio-rx.c
@@ -38,9 +38,9 @@ ssize_t vivid_radio_rx_read(struct file *file, char __user *buf,
 			 size_t size, loff_t *offset)
 {
 	struct vivid_dev *dev = video_drvdata(file);
-	struct timespec ts;
 	struct v4l2_rds_data *data = dev->rds_gen.data;
 	bool use_alternates;
+	ktime_t timestamp;
 	unsigned blk;
 	int perc;
 	int i;
@@ -64,17 +64,16 @@ ssize_t vivid_radio_rx_read(struct file *file, char __user *buf,
 	}
 
 retry:
-	ktime_get_ts(&ts);
-	use_alternates = ts.tv_sec % 10 >= 5;
+	timestamp = ktime_sub(ktime_get(), dev->radio_rds_init_time);
+	blk = ktime_divns(timestamp, VIVID_RDS_NSEC_PER_BLK);
+	use_alternates = blk % VIVID_RDS_GEN_BLOCKS;
+
 	if (dev->radio_rx_rds_last_block == 0 ||
 	    dev->radio_rx_rds_use_alternates != use_alternates) {
 		dev->radio_rx_rds_use_alternates = use_alternates;
 		/* Re-init the RDS generator */
 		vivid_radio_rds_init(dev);
 	}
-	ts = timespec_sub(ts, dev->radio_rds_init_ts);
-	blk = ts.tv_sec * 100 + ts.tv_nsec / 10000000;
-	blk = (blk * VIVID_RDS_GEN_BLOCKS) / 500;
 	if (blk >= dev->radio_rx_rds_last_block + VIVID_RDS_GEN_BLOCKS)
 		dev->radio_rx_rds_last_block = blk - VIVID_RDS_GEN_BLOCKS + 1;
 
diff --git a/drivers/media/platform/vivid/vivid-radio-tx.c b/drivers/media/platform/vivid/vivid-radio-tx.c
index 0e8025b7b4dd..897b56195ca7 100644
--- a/drivers/media/platform/vivid/vivid-radio-tx.c
+++ b/drivers/media/platform/vivid/vivid-radio-tx.c
@@ -37,7 +37,7 @@ ssize_t vivid_radio_tx_write(struct file *file, const char __user *buf,
 {
 	struct vivid_dev *dev = video_drvdata(file);
 	struct v4l2_rds_data *data = dev->rds_gen.data;
-	struct timespec ts;
+	ktime_t timestamp;
 	unsigned blk;
 	int i;
 
@@ -58,10 +58,8 @@ ssize_t vivid_radio_tx_write(struct file *file, const char __user *buf,
 	dev->radio_tx_rds_owner = file->private_data;
 
 retry:
-	ktime_get_ts(&ts);
-	ts = timespec_sub(ts, dev->radio_rds_init_ts);
-	blk = ts.tv_sec * 100 + ts.tv_nsec / 10000000;
-	blk = (blk * VIVID_RDS_GEN_BLOCKS) / 500;
+	timestamp = ktime_sub(ktime_get(), dev->radio_rds_init_time);
+	blk = ktime_divns(timestamp, VIVID_RDS_NSEC_PER_BLK);
 	if (blk - VIVID_RDS_GEN_BLOCKS >= dev->radio_tx_rds_last_block)
 		dev->radio_tx_rds_last_block = blk - VIVID_RDS_GEN_BLOCKS + 1;
 
diff --git a/drivers/media/platform/vivid/vivid-rds-gen.h b/drivers/media/platform/vivid/vivid-rds-gen.h
index eff4bf552ed3..e55e3b22b7ca 100644
--- a/drivers/media/platform/vivid/vivid-rds-gen.h
+++ b/drivers/media/platform/vivid/vivid-rds-gen.h
@@ -29,6 +29,7 @@
 #define VIVID_RDS_GEN_GROUPS 57
 #define VIVID_RDS_GEN_BLKS_PER_GRP 4
 #define VIVID_RDS_GEN_BLOCKS (VIVID_RDS_GEN_BLKS_PER_GRP * VIVID_RDS_GEN_GROUPS)
+#define VIVID_RDS_NSEC_PER_BLK (u32)(5ull * NSEC_PER_SEC / VIVID_RDS_GEN_BLOCKS)
 
 struct vivid_rds_gen {
 	struct v4l2_rds_data	data[VIVID_RDS_GEN_BLOCKS];
-- 
2.9.0

  parent reply	other threads:[~2017-11-27 13:23 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-27 13:19 [PATCH 1/8] [media] uvc_video: use ktime_t for stats Arnd Bergmann
2017-11-27 13:19 ` [PATCH 2/8] [media] uvc_video: use ktime_t for timestamps Arnd Bergmann
2017-12-05  0:37   ` Laurent Pinchart
2017-12-05  0:58     ` Laurent Pinchart
2017-12-05 11:27       ` Arnd Bergmann
2017-11-27 13:19 ` [PATCH 3/8] [media] solo6x10: use ktime_get_ts64() for time sync Arnd Bergmann
2017-11-27 20:45   ` Ismael Luceno
2017-11-27 13:19 ` [PATCH 4/8] [media] staging: bcm2835-camera use ktime_t for timestamps Arnd Bergmann
2017-11-27 13:19 ` [PATCH 5/8] [media] omap3isp: support 64-bit version of omap3isp_stat_data Arnd Bergmann
2017-12-05  0:41   ` Laurent Pinchart
2018-01-16 17:10     ` Arnd Bergmann
2017-11-27 13:19 ` Arnd Bergmann [this message]
2017-11-27 15:14   ` [PATCH 6/8] [media] vivid: use ktime_t for timestamp calculation Hans Verkuil
2017-11-27 15:25     ` Arnd Bergmann
2017-11-27 13:19 ` [PATCH 7/8] [media] staging: atomisp: convert timestamps to ktime_t Arnd Bergmann
2017-11-27 15:05   ` Andy Shevchenko
2017-11-27 15:20     ` [Y2038] " Arnd Bergmann
2017-11-27 13:20 ` [PATCH 8/8] [media] staging: imx: use ktime_t for timestamps Arnd Bergmann
2017-12-01 23:55   ` Steve Longerbeam
2017-12-05  0:40 ` [PATCH 1/8] [media] uvc_video: use ktime_t for stats Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171127132027.1734806-6-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=hverkuil@xs4all.nl \
    --cc=javier@osg.samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mingo@kernel.org \
    --cc=vincent.abriou@st.com \
    --cc=y2038@lists.linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®