[PATCH] USB: serial: Clean up the return values of read_reg and write_reg

[Gimcuan Hui <gimcuan@gmail.com>]

write_reg returns 0 on success, we can make it more explicit by returning
number 0 instead of result variable.

read_reg should return 0 on success since this is a more common pattern.

The user of read_reg has been clean-up and should be at the same commit.

Signed-off-by: Gimcuan Hui <gimcuan@gmail.com>
---
 drivers/usb/serial/ark3116.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 3c544782f60b..23d46ef87d64 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -83,7 +83,10 @@ static int ark3116_write_reg(struct usb_serial *serial,
 				 usb_sndctrlpipe(serial->dev, 0),
 				 0xfe, 0x40, val, reg,
 				 NULL, 0, ARK_TIMEOUT);
-	return result;
+	if (result)
+		return result;
+
+	return 0;
 }
 
 static int ark3116_read_reg(struct usb_serial *serial,
@@ -105,7 +108,7 @@ static int ark3116_read_reg(struct usb_serial *serial,
 		return result;
 	}
 
-	return buf[0];
+	return 0;
 }
 
 static inline int calc_divisor(int bps)
@@ -355,13 +358,13 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* read modem status */
 	result = ark3116_read_reg(serial, UART_MSR, buf);
-	if (result < 0)
+	if (result)
 		goto err_close;
 	priv->msr = *buf;
 
 	/* read line status */
 	result = ark3116_read_reg(serial, UART_LSR, buf);
-	if (result < 0)
+	if (result)
 		goto err_close;
 	priv->lsr = *buf;
 
-- 
2.11.0