mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joel Stanley <joel@jms.id.au>
To: Lee Jones <lee.jones@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Andrew Jeffery <andrew@aj.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Jeremy Kerr <jk@ozlabs.org>, Rick Altherr <raltherr@google.com>,
	Ryan Chen <ryan_chen@aspeedtech.com>,
	Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH v6 5/5] clk: aspeed: Add reset controller
Date: Tue, 28 Nov 2017 17:49:08 +1030	[thread overview]
Message-ID: <20171128071908.12279-6-joel@jms.id.au> (raw)
In-Reply-To: <20171128071908.12279-1-joel@jms.id.au>

There are some resets that are not associated with gates. These are
represented by a reset controller.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v5:
  - Add Andrew's Reviewed-by
v3:
  - Add named initalisers for the reset defines
  - Add define for ADC
---
 drivers/clk/clk-aspeed.c                 | 82 +++++++++++++++++++++++++++++++-
 include/dt-bindings/clock/aspeed-clock.h | 10 ++++
 2 files changed, 91 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
index b5dc3e298693..f2722be17ede 100644
--- a/drivers/clk/clk-aspeed.c
+++ b/drivers/clk/clk-aspeed.c
@@ -8,6 +8,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/reset-controller.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
@@ -266,6 +267,68 @@ static const struct clk_ops aspeed_clk_gate_ops = {
 	.is_enabled = aspeed_clk_is_enabled,
 };
 
+/**
+ * struct aspeed_reset - Aspeed reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct aspeed_reset {
+	struct regmap			*map;
+	struct reset_controller_dev	rcdev;
+};
+
+#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
+
+static const u8 aspeed_resets[] = {
+	[ASPEED_RESET_XDMA]	= 25,
+	[ASPEED_RESET_MCTP]	= 24,
+	[ASPEED_RESET_ADC]	= 23,
+	[ASPEED_RESET_JTAG_MASTER] = 22,
+	[ASPEED_RESET_MIC]	= 18,
+	[ASPEED_RESET_PWM]	=  9,
+	[ASPEED_RESET_PCIVGA]	=  8,
+	[ASPEED_RESET_I2C]	=  2,
+	[ASPEED_RESET_AHB]	=  1,
+};
+
+static int aspeed_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+	u32 rst = BIT(aspeed_resets[id]);
+
+	return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, 0);
+}
+
+static int aspeed_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+	u32 rst = BIT(aspeed_resets[id]);
+
+	return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, rst);
+}
+
+static int aspeed_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+	u32 val, rst = BIT(aspeed_resets[id]);
+	int ret;
+
+	ret = regmap_read(ar->map, ASPEED_RESET_CTRL, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & rst);
+}
+
+static const struct reset_control_ops aspeed_reset_ops = {
+	.assert = aspeed_reset_assert,
+	.deassert = aspeed_reset_deassert,
+	.status = aspeed_reset_status,
+};
+
 static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
 		const char *name, const char *parent_name, unsigned long flags,
 		struct regmap *map, u8 clock_idx, u8 reset_idx,
@@ -307,10 +370,11 @@ static int aspeed_clk_probe(struct platform_device *pdev)
 {
 	const struct aspeed_clk_soc_data *soc_data;
 	struct device *dev = &pdev->dev;
+	struct aspeed_reset *ar;
 	struct regmap *map;
 	struct clk_hw *hw;
 	u32 val, rate;
-	int i;
+	int i, ret;
 
 	map = syscon_node_to_regmap(dev->of_node);
 	if (IS_ERR(map)) {
@@ -318,6 +382,22 @@ static int aspeed_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(map);
 	}
 
+	ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
+	if (!ar)
+		return -ENOMEM;
+
+	ar->map = map;
+	ar->rcdev.owner = THIS_MODULE;
+	ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets);
+	ar->rcdev.ops = &aspeed_reset_ops;
+	ar->rcdev.of_node = dev->of_node;
+
+	ret = devm_reset_controller_register(dev, &ar->rcdev);
+	if (ret) {
+		dev_err(dev, "could not register reset controller\n");
+		return ret;
+	}
+
 	/* SoC generations share common layouts but have different divisors */
 	soc_data = of_device_get_match_data(dev);
 	if (!soc_data) {
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
index 9e170fb9a0da..fe46ab69da5c 100644
--- a/include/dt-bindings/clock/aspeed-clock.h
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -41,4 +41,14 @@
 
 #define ASPEED_NUM_CLKS			35
 
+#define ASPEED_RESET_XDMA		0
+#define ASPEED_RESET_MCTP		1
+#define ASPEED_RESET_ADC		2
+#define ASPEED_RESET_JTAG_MASTER	3
+#define ASPEED_RESET_MIC		4
+#define ASPEED_RESET_PWM		5
+#define ASPEED_RESET_PCIVGA		6
+#define ASPEED_RESET_I2C		7
+#define ASPEED_RESET_AHB		8
+
 #endif
-- 
2.14.1

  parent reply	other threads:[~2017-11-28  7:20 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-28  7:19 [PATCH v6 0/5] clk: Add Aspeed clock driver Joel Stanley
2017-11-28  7:19 ` [PATCH v6 1/5] clk: Add clock driver for ASPEED BMC SoCs Joel Stanley
2017-12-20  3:42   ` Joel Stanley
2017-11-28  7:19 ` [PATCH v6 2/5] clk: aspeed: Register core clocks Joel Stanley
2017-11-28  7:19 ` [PATCH v6 3/5] clk: aspeed: Add platform driver and register PLLs Joel Stanley
2017-11-28  7:19 ` [PATCH v6 4/5] clk: aspeed: Register gated clocks Joel Stanley
2017-12-21 23:39   ` Stephen Boyd
2017-12-22  2:36     ` Benjamin Herrenschmidt
2017-12-22  2:43       ` Benjamin Herrenschmidt
2017-12-27  1:32         ` Stephen Boyd
2017-12-29 22:03           ` Benjamin Herrenschmidt
2018-01-02  5:46             ` Benjamin Herrenschmidt
2018-01-02 18:16             ` Stephen Boyd
2017-11-28  7:19 ` Joel Stanley [this message]
2017-12-06  7:56 ` [PATCH v6 0/5] clk: Add Aspeed clock driver Joel Stanley
2017-12-21 23:40   ` Stephen Boyd
2017-12-22  1:42     ` Joel Stanley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171128071908.12279-6-joel@jms.id.au \
    --to=joel@jms.id.au \
    --cc=andrew@aj.id.au \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=jk@ozlabs.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=raltherr@google.com \
    --cc=ryan_chen@aspeedtech.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®