mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: "Dou Liyang" <douly.fnst@cn.fujitsu.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	yinghai@kernel.org, bhe@redhat.com,
	"Ingo Molnar" <mingo@redhat.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: [PATCH] Revert "x86/apic: Remove init_bsp_APIC()"
Date: Tue, 28 Nov 2017 16:53:50 +0200	[thread overview]
Message-ID: <20171128145350.21560-1-ville.syrjala@linux.intel.com> (raw)

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

This reverts commit b371ae0d4a194b178817b0edfb6a7395c7aec37a.

Causes my P3 UP machine to hang at boot with "lapic".

Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yinghai@kernel.org
Cc: bhe@redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 arch/x86/include/asm/apic.h |  1 +
 arch/x86/kernel/apic/apic.c | 49 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/irqinit.c   |  3 +++
 3 files changed, 53 insertions(+)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index a9e57f08bfa6..98722773391d 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -136,6 +136,7 @@ extern void disconnect_bsp_APIC(int virt_wire_setup);
 extern void disable_local_APIC(void);
 extern void lapic_shutdown(void);
 extern void sync_Arb_IDs(void);
+extern void init_bsp_APIC(void);
 extern void apic_intr_mode_init(void);
 extern void setup_local_APIC(void);
 extern void init_apic_mappings(void);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 6e272f3ea984..cec9aaea7f9d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1286,6 +1286,55 @@ static int __init apic_intr_mode_select(void)
 	return APIC_SYMMETRIC_IO;
 }
 
+/*
+ * An initial setup of the virtual wire mode.
+ */
+void __init init_bsp_APIC(void)
+{
+	unsigned int value;
+
+	/*
+	 * Don't do the setup now if we have a SMP BIOS as the
+	 * through-I/O-APIC virtual wire mode might be active.
+	 */
+	if (smp_found_config || !boot_cpu_has(X86_FEATURE_APIC))
+		return;
+
+	/*
+	 * Do not trust the local APIC being empty at bootup.
+	 */
+	clear_local_APIC();
+
+	/*
+	 * Enable APIC.
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+
+#ifdef CONFIG_X86_32
+	/* This bit is reserved on P4/Xeon and should be cleared */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    (boot_cpu_data.x86 == 15))
+		value &= ~APIC_SPIV_FOCUS_DISABLED;
+	else
+#endif
+		value |= APIC_SPIV_FOCUS_DISABLED;
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write(APIC_SPIV, value);
+
+	/*
+	 * Set up the virtual wire mode.
+	 */
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
+	value = APIC_DM_NMI;
+	if (!lapic_is_integrated())		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	if (apic_extnmi == APIC_EXTNMI_NONE)
+		value |= APIC_LVT_MASKED;
+	apic_write(APIC_LVT1, value);
+}
+
 /* Init the interrupt delivery mode for the BSP */
 void __init apic_intr_mode_init(void)
 {
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 8da3e909e967..a539410c4ea9 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -61,6 +61,9 @@ void __init init_ISA_irqs(void)
 	struct irq_chip *chip = legacy_pic->chip;
 	int i;
 
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+	init_bsp_APIC();
+#endif
 	legacy_pic->init(0);
 
 	for (i = 0; i < nr_legacy_irqs(); i++)
-- 
2.13.6

             reply	other threads:[~2017-11-28 14:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-28 14:53 Ville Syrjala [this message]
2017-11-29  1:15 ` Dou Liyang
2017-11-29 21:25   ` Ville Syrjälä
2017-11-30  6:28     ` Dou Liyang
2017-12-01 13:18       ` Ville Syrjälä
2017-12-04  3:28         ` Dou Liyang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171128145350.21560-1-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=bhe@redhat.com \
    --cc=douly.fnst@cn.fujitsu.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®