From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1754339AbdK1Usu (ORCPT <rfc822;w@1wt.eu>);
        Tue, 28 Nov 2017 15:48:50 -0500
Received: from mail-io0-f195.google.com ([209.85.223.195]:42531 "EHLO
        mail-io0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1752463AbdK1Usq (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Tue, 28 Nov 2017 15:48:46 -0500
X-Google-Smtp-Source: AGs4zMbju4jZXxK6DtW2JGilAuhax0vqmwIuiWWzJ+ZBoZCRfLyCpJunxIv05ATn6gSYYPj/NH/KUw==
Date: Tue, 28 Nov 2017 12:48:43 -0800
From: Matthias Kaehlcke <mka@chromium.org>
To: Nickey Yang <nickey.yang@rock-chips.com>
Cc: robh+dt@kernel.org, heiko@sntech.de, mark.rutland@arm.com,
        airlied@linux.ie, linux-kernel@vger.kernel.org,
        dri-devel@lists.freedesktop.org, linux-rockchip@lists.infradead.org,
        seanpaul@chromium.org, briannorris@chromium.org, hoegsberg@gmail.com,
        architt@codeaurora.org, philippe.cornu@st.com, yannick.fertre@st.com,
        hl@rock-chips.com, zyw@rock-chips.com, xbl@rock-chips.com
Subject: Re: [PATCH v3 4/5] drm/rockchip: Add ROCKCHIP DW MIPI DSI controller
 driver
Message-ID: <20171128204843.GB58379@google.com>
References: <1511868006-27130-1-git-send-email-nickey.yang@rock-chips.com>
 <1511868006-27130-5-git-send-email-nickey.yang@rock-chips.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <1511868006-27130-5-git-send-email-nickey.yang@rock-chips.com>
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

El Tue, Nov 28, 2017 at 07:20:05PM +0800 Nickey Yang ha dit:

> Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
> MIPI DSI host controller bridge.
> 
> v2:
>    add err_pllref, remove unnecessary encoder.enable & disable
>    correct spelling mistakes
> v3:
>    call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind()
>    fix typo, use of_device_get_match_data(),
>    change some ‘bind()’ logic into 'probe()'
>    add 'dev_set_drvdata()'
> 
> Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
> ---
>  drivers/gpu/drm/rockchip/Kconfig                |    2 +-
>  drivers/gpu/drm/rockchip/Makefile               |    2 +-
>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c          | 1349 -----------------------
>  drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c |  764 +++++++++++++
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.c     |    2 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h     |    2 +-
>  6 files changed, 768 insertions(+), 1353 deletions(-)
>  delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>  create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
> 
> diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
> index 0ccc762..9eb4795 100644
> --- a/drivers/gpu/drm/rockchip/Kconfig
> +++ b/drivers/gpu/drm/rockchip/Kconfig
> @@ -7,7 +7,7 @@ config DRM_ROCKCHIP
>  	select VIDEOMODE_HELPERS
>  	select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP
>  	select DRM_DW_HDMI if ROCKCHIP_DW_HDMI
> -	select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
> +	select DRM_DW_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
>  	select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC
>  	help
>  	  Choose this option if you have a Rockchip soc chipset.
> diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
> index a314e21..c05fe47 100644
> --- a/drivers/gpu/drm/rockchip/Makefile
> +++ b/drivers/gpu/drm/rockchip/Makefile
> @@ -11,7 +11,7 @@ rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o
>  rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
>  rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
>  rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
> -rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
> +rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi_rockchip.o
>  rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
>  rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o
>  
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> deleted file mode 100644
> index b15755b..0000000
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ /dev/null
> @@ -1,1349 +0,0 @@
> -/*
> - * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -#include <linux/clk.h>
> -#include <linux/component.h>
> -#include <linux/iopoll.h>
> -#include <linux/math64.h>
> -#include <linux/module.h>
> -#include <linux/of_device.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/regmap.h>
> -#include <linux/reset.h>
> -#include <linux/mfd/syscon.h>
> -#include <drm/drm_atomic_helper.h>
> -#include <drm/drm_crtc.h>
> -#include <drm/drm_crtc_helper.h>
> -#include <drm/drm_mipi_dsi.h>
> -#include <drm/drm_of.h>
> -#include <drm/drm_panel.h>
> -#include <drm/drmP.h>
> -#include <video/mipi_display.h>
> -
> -#include "rockchip_drm_drv.h"
> -#include "rockchip_drm_vop.h"
> -
> -#define DRIVER_NAME    "dw-mipi-dsi"
> -
> -#define RK3288_GRF_SOC_CON6		0x025c
> -#define RK3288_DSI0_SEL_VOP_LIT		BIT(6)
> -#define RK3288_DSI1_SEL_VOP_LIT		BIT(9)
> -
> -#define RK3399_GRF_SOC_CON20		0x6250
> -#define RK3399_DSI0_SEL_VOP_LIT		BIT(0)
> -#define RK3399_DSI1_SEL_VOP_LIT		BIT(4)
> -
> -/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
> -#define RK3399_GRF_SOC_CON22		0x6258
> -#define RK3399_GRF_DSI_MODE		0xffff0000
> -
> -#define DSI_VERSION			0x00
> -#define DSI_PWR_UP			0x04
> -#define RESET				0
> -#define POWERUP				BIT(0)
> -
> -#define DSI_CLKMGR_CFG			0x08
> -#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
> -#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
> -
> -#define DSI_DPI_VCID			0x0c
> -#define DPI_VID(vid)			(((vid) & 0x3) << 0)
> -
> -#define DSI_DPI_COLOR_CODING		0x10
> -#define EN18_LOOSELY			BIT(8)
> -#define DPI_COLOR_CODING_16BIT_1	0x0
> -#define DPI_COLOR_CODING_16BIT_2	0x1
> -#define DPI_COLOR_CODING_16BIT_3	0x2
> -#define DPI_COLOR_CODING_18BIT_1	0x3
> -#define DPI_COLOR_CODING_18BIT_2	0x4
> -#define DPI_COLOR_CODING_24BIT		0x5
> -
> -#define DSI_DPI_CFG_POL			0x14
> -#define COLORM_ACTIVE_LOW		BIT(4)
> -#define SHUTD_ACTIVE_LOW		BIT(3)
> -#define HSYNC_ACTIVE_LOW		BIT(2)
> -#define VSYNC_ACTIVE_LOW		BIT(1)
> -#define DATAEN_ACTIVE_LOW		BIT(0)
> -
> -#define DSI_DPI_LP_CMD_TIM		0x18
> -#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
> -#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
> -
> -#define DSI_DBI_CFG			0x20
> -#define DSI_DBI_CMDSIZE			0x28
> -
> -#define DSI_PCKHDL_CFG			0x2c
> -#define EN_CRC_RX			BIT(4)
> -#define EN_ECC_RX			BIT(3)
> -#define EN_BTA				BIT(2)
> -#define EN_EOTP_RX			BIT(1)
> -#define EN_EOTP_TX			BIT(0)
> -
> -#define DSI_MODE_CFG			0x34
> -#define ENABLE_VIDEO_MODE		0
> -#define ENABLE_CMD_MODE			BIT(0)
> -
> -#define DSI_VID_MODE_CFG		0x38
> -#define FRAME_BTA_ACK			BIT(14)
> -#define ENABLE_LOW_POWER		(0x3f << 8)
> -#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
> -#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
> -#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
> -#define VID_MODE_TYPE_BURST			0x2
> -#define VID_MODE_TYPE_MASK			0x3
> -
> -#define DSI_VID_PKT_SIZE		0x3c
> -#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
> -#define VID_PKT_MAX_SIZE		0x3fff
> -
> -#define DSI_VID_HSA_TIME		0x48
> -#define DSI_VID_HBP_TIME		0x4c
> -#define DSI_VID_HLINE_TIME		0x50
> -#define DSI_VID_VSA_LINES		0x54
> -#define DSI_VID_VBP_LINES		0x58
> -#define DSI_VID_VFP_LINES		0x5c
> -#define DSI_VID_VACTIVE_LINES		0x60
> -#define DSI_CMD_MODE_CFG		0x68
> -#define MAX_RD_PKT_SIZE_LP		BIT(24)
> -#define DCS_LW_TX_LP			BIT(19)
> -#define DCS_SR_0P_TX_LP			BIT(18)
> -#define DCS_SW_1P_TX_LP			BIT(17)
> -#define DCS_SW_0P_TX_LP			BIT(16)
> -#define GEN_LW_TX_LP			BIT(14)
> -#define GEN_SR_2P_TX_LP			BIT(13)
> -#define GEN_SR_1P_TX_LP			BIT(12)
> -#define GEN_SR_0P_TX_LP			BIT(11)
> -#define GEN_SW_2P_TX_LP			BIT(10)
> -#define GEN_SW_1P_TX_LP			BIT(9)
> -#define GEN_SW_0P_TX_LP			BIT(8)
> -#define EN_ACK_RQST			BIT(1)
> -#define EN_TEAR_FX			BIT(0)
> -
> -#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
> -					 DCS_LW_TX_LP | \
> -					 DCS_SR_0P_TX_LP | \
> -					 DCS_SW_1P_TX_LP | \
> -					 DCS_SW_0P_TX_LP | \
> -					 GEN_LW_TX_LP | \
> -					 GEN_SR_2P_TX_LP | \
> -					 GEN_SR_1P_TX_LP | \
> -					 GEN_SR_0P_TX_LP | \
> -					 GEN_SW_2P_TX_LP | \
> -					 GEN_SW_1P_TX_LP | \
> -					 GEN_SW_0P_TX_LP)
> -
> -#define DSI_GEN_HDR			0x6c
> -#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
> -#define GEN_HDATA_MASK			(0xffff << 8)
> -#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
> -#define GEN_HTYPE_MASK			0xff
> -
> -#define DSI_GEN_PLD_DATA		0x70
> -
> -#define DSI_CMD_PKT_STATUS		0x74
> -#define GEN_CMD_EMPTY			BIT(0)
> -#define GEN_CMD_FULL			BIT(1)
> -#define GEN_PLD_W_EMPTY			BIT(2)
> -#define GEN_PLD_W_FULL			BIT(3)
> -#define GEN_PLD_R_EMPTY			BIT(4)
> -#define GEN_PLD_R_FULL			BIT(5)
> -#define GEN_RD_CMD_BUSY			BIT(6)
> -
> -#define DSI_TO_CNT_CFG			0x78
> -#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
> -#define LPRX_TO_CNT(p)			((p) & 0xffff)
> -
> -#define DSI_BTA_TO_CNT			0x8c
> -#define DSI_LPCLK_CTRL			0x94
> -#define AUTO_CLKLANE_CTRL		BIT(1)
> -#define PHY_TXREQUESTCLKHS		BIT(0)
> -
> -#define DSI_PHY_TMR_LPCLK_CFG		0x98
> -#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
> -#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
> -
> -#define DSI_PHY_TMR_CFG			0x9c
> -#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
> -#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
> -#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
> -
> -#define DSI_PHY_RSTZ			0xa0
> -#define PHY_DISFORCEPLL			0
> -#define PHY_ENFORCEPLL			BIT(3)
> -#define PHY_DISABLECLK			0
> -#define PHY_ENABLECLK			BIT(2)
> -#define PHY_RSTZ			0
> -#define PHY_UNRSTZ			BIT(1)
> -#define PHY_SHUTDOWNZ			0
> -#define PHY_UNSHUTDOWNZ			BIT(0)
> -
> -#define DSI_PHY_IF_CFG			0xa4
> -#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
> -#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
> -
> -#define DSI_PHY_STATUS			0xb0
> -#define LOCK				BIT(0)
> -#define STOP_STATE_CLK_LANE		BIT(2)
> -
> -#define DSI_PHY_TST_CTRL0		0xb4
> -#define PHY_TESTCLK			BIT(1)
> -#define PHY_UNTESTCLK			0
> -#define PHY_TESTCLR			BIT(0)
> -#define PHY_UNTESTCLR			0
> -
> -#define DSI_PHY_TST_CTRL1		0xb8
> -#define PHY_TESTEN			BIT(16)
> -#define PHY_UNTESTEN			0
> -#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
> -#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
> -
> -#define DSI_INT_ST0			0xbc
> -#define DSI_INT_ST1			0xc0
> -#define DSI_INT_MSK0			0xc4
> -#define DSI_INT_MSK1			0xc8
> -
> -#define PHY_STATUS_TIMEOUT_US		10000
> -#define CMD_PKT_STATUS_TIMEOUT_US	20000
> -
> -#define BYPASS_VCO_RANGE	BIT(7)
> -#define VCO_RANGE_CON_SEL(val)	(((val) & 0x7) << 3)
> -#define VCO_IN_CAP_CON_DEFAULT	(0x0 << 1)
> -#define VCO_IN_CAP_CON_LOW	(0x1 << 1)
> -#define VCO_IN_CAP_CON_HIGH	(0x2 << 1)
> -#define REF_BIAS_CUR_SEL	BIT(0)
> -
> -#define CP_CURRENT_3MA		BIT(3)
> -#define CP_PROGRAM_EN		BIT(7)
> -#define LPF_PROGRAM_EN		BIT(6)
> -#define LPF_RESISTORS_20_KOHM	0
> -
> -#define HSFREQRANGE_SEL(val)	(((val) & 0x3f) << 1)
> -
> -#define INPUT_DIVIDER(val)	(((val) - 1) & 0x7f)
> -#define LOW_PROGRAM_EN		0
> -#define HIGH_PROGRAM_EN		BIT(7)
> -#define LOOP_DIV_LOW_SEL(val)	(((val) - 1) & 0x1f)
> -#define LOOP_DIV_HIGH_SEL(val)	((((val) - 1) >> 5) & 0x1f)
> -#define PLL_LOOP_DIV_EN		BIT(5)
> -#define PLL_INPUT_DIV_EN	BIT(4)
> -
> -#define POWER_CONTROL		BIT(6)
> -#define INTERNAL_REG_CURRENT	BIT(3)
> -#define BIAS_BLOCK_ON		BIT(2)
> -#define BANDGAP_ON		BIT(0)
> -
> -#define TER_RESISTOR_HIGH	BIT(7)
> -#define	TER_RESISTOR_LOW	0
> -#define LEVEL_SHIFTERS_ON	BIT(6)
> -#define TER_CAL_DONE		BIT(5)
> -#define SETRD_MAX		(0x7 << 2)
> -#define POWER_MANAGE		BIT(1)
> -#define TER_RESISTORS_ON	BIT(0)
> -
> -#define BIASEXTR_SEL(val)	((val) & 0x7)
> -#define BANDGAP_SEL(val)	((val) & 0x7)
> -#define TLP_PROGRAM_EN		BIT(7)
> -#define THS_PRE_PROGRAM_EN	BIT(7)
> -#define THS_ZERO_PROGRAM_EN	BIT(6)
> -
> -#define DW_MIPI_NEEDS_PHY_CFG_CLK	BIT(0)
> -#define DW_MIPI_NEEDS_GRF_CLK		BIT(1)
> -
> -enum {
> -	BANDGAP_97_07,
> -	BANDGAP_98_05,
> -	BANDGAP_99_02,
> -	BANDGAP_100_00,
> -	BANDGAP_93_17,
> -	BANDGAP_94_15,
> -	BANDGAP_95_12,
> -	BANDGAP_96_10,
> -};
> -
> -enum {
> -	BIASEXTR_87_1,
> -	BIASEXTR_91_5,
> -	BIASEXTR_95_9,
> -	BIASEXTR_100,
> -	BIASEXTR_105_94,
> -	BIASEXTR_111_88,
> -	BIASEXTR_118_8,
> -	BIASEXTR_127_7,
> -};
> -
> -struct dw_mipi_dsi_plat_data {
> -	u32 dsi0_en_bit;
> -	u32 dsi1_en_bit;
> -	u32 grf_switch_reg;
> -	u32 grf_dsi0_mode;
> -	u32 grf_dsi0_mode_reg;
> -	unsigned int flags;
> -	unsigned int max_data_lanes;
> -};
> -
> -struct dw_mipi_dsi {
> -	struct drm_encoder encoder;
> -	struct drm_connector connector;
> -	struct mipi_dsi_host dsi_host;
> -	struct drm_panel *panel;
> -	struct device *dev;
> -	struct regmap *grf_regmap;
> -	void __iomem *base;
> -
> -	struct clk *grf_clk;
> -	struct clk *pllref_clk;
> -	struct clk *pclk;
> -	struct clk *phy_cfg_clk;
> -
> -	int dpms_mode;
> -	unsigned int lane_mbps; /* per lane */
> -	u32 channel;
> -	u32 lanes;
> -	u32 format;
> -	u16 input_div;
> -	u16 feedback_div;
> -	unsigned long mode_flags;
> -
> -	const struct dw_mipi_dsi_plat_data *pdata;
> -};
> -
> -enum dw_mipi_dsi_mode {
> -	DW_MIPI_DSI_CMD_MODE,
> -	DW_MIPI_DSI_VID_MODE,
> -};
> -
> -struct dphy_pll_testdin_map {
> -	unsigned int max_mbps;
> -	u8 testdin;
> -};
> -
> -/* The table is based on 27MHz DPHY pll reference clock. */
> -static const struct dphy_pll_testdin_map dptdin_map[] = {
> -	{  90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01},
> -	{ 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12},
> -	{ 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23},
> -	{ 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15},
> -	{ 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07},
> -	{ 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09},
> -	{ 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a},
> -	{1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
> -	{1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
> -	{1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
> -};
> -
> -static int max_mbps_to_testdin(unsigned int max_mbps)
> -{
> -	int i;
> -
> -	for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
> -		if (dptdin_map[i].max_mbps > max_mbps)
> -			return dptdin_map[i].testdin;
> -
> -	return -EINVAL;
> -}
> -
> -/*
> - * The controller should generate 2 frames before
> - * preparing the peripheral.
> - */
> -static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
> -{
> -	int refresh, two_frames;
> -
> -	refresh = drm_mode_vrefresh(mode);
> -	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> -	msleep(two_frames);
> -}
> -
> -static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
> -{
> -	return container_of(host, struct dw_mipi_dsi, dsi_host);
> -}
> -
> -static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
> -{
> -	return container_of(con, struct dw_mipi_dsi, connector);
> -}
> -
> -static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder *encoder)
> -{
> -	return container_of(encoder, struct dw_mipi_dsi, encoder);
> -}
> -
> -static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> -{
> -	writel(val, dsi->base + reg);
> -}
> -
> -static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> -{
> -	return readl(dsi->base + reg);
> -}
> -
> -static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code,
> -				  u8 test_data)
> -{
> -	/*
> -	 * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
> -	 * is latched internally as the current test code. Test data is
> -	 * programmed internally by rising edge on TESTCLK.
> -	 */
> -	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> -
> -	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
> -					  PHY_TESTDIN(test_code));
> -
> -	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> -
> -	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> -					  PHY_TESTDIN(test_data));
> -
> -	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> -}
> -
> -/**
> - * ns2bc - Nanoseconds to byte clock cycles
> - */
> -static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns)
> -{
> -	return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
> -}
> -
> -/**
> - * ns2ui - Nanoseconds to UI time periods
> - */
> -static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns)
> -{
> -	return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000);
> -}
> -
> -static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
> -{
> -	int ret, testdin, vco, val;
> -
> -	vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
> -
> -	testdin = max_mbps_to_testdin(dsi->lane_mbps);
> -	if (testdin < 0) {
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "failed to get testdin for %dmbps lane clock\n",
> -			      dsi->lane_mbps);
> -		return testdin;
> -	}
> -
> -	/* Start by clearing PHY state */
> -	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> -	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
> -	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> -
> -	ret = clk_prepare_enable(dsi->phy_cfg_clk);
> -	if (ret) {
> -		DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
> -		return ret;
> -	}
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
> -					 VCO_RANGE_CON_SEL(vco) |
> -					 VCO_IN_CAP_CON_LOW |
> -					 REF_BIAS_CUR_SEL);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
> -	dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
> -					 LPF_RESISTORS_20_KOHM);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
> -	dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) |
> -					 LOW_PROGRAM_EN);
> -	dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
> -					 HIGH_PROGRAM_EN);
> -	dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
> -					 BIASEXTR_SEL(BIASEXTR_127_7));
> -	dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
> -					 BANDGAP_SEL(BANDGAP_96_10));
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT |
> -					 BIAS_BLOCK_ON | BANDGAP_ON);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
> -					 SETRD_MAX | TER_RESISTORS_ON);
> -	dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
> -					 SETRD_MAX | POWER_MANAGE |
> -					 TER_RESISTORS_ON);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
> -	dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
> -	dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
> -	dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
> -	dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
> -	dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
> -	dw_mipi_dsi_phy_write(dsi, 0x71,
> -			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
> -	dw_mipi_dsi_phy_write(dsi, 0x72,
> -			      THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
> -	dw_mipi_dsi_phy_write(dsi, 0x73,
> -			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
> -	dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
> -
> -	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
> -				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> -
> -	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
> -				 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
> -	if (ret < 0) {
> -		DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n");
> -		goto phy_init_end;
> -	}
> -
> -	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
> -				 val, val & STOP_STATE_CLK_LANE, 1000,
> -				 PHY_STATUS_TIMEOUT_US);
> -	if (ret < 0)
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "failed to wait for phy clk lane stop state\n");
> -
> -phy_init_end:
> -	clk_disable_unprepare(dsi->phy_cfg_clk);
> -
> -	return ret;
> -}
> -
> -static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
> -				    struct drm_display_mode *mode)
> -{
> -	unsigned int i, pre;
> -	unsigned long mpclk, pllref, tmp;
> -	unsigned int m = 1, n = 1, target_mbps = 1000;
> -	unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps;
> -	int bpp;
> -
> -	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> -	if (bpp < 0) {
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "failed to get bpp for pixel format %d\n",
> -			      dsi->format);
> -		return bpp;
> -	}
> -
> -	mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
> -	if (mpclk) {
> -		/* take 1 / 0.8, since mbps must big than bandwidth of RGB */
> -		tmp = mpclk * (bpp / dsi->lanes) * 10 / 8;
> -		if (tmp < max_mbps)
> -			target_mbps = tmp;
> -		else
> -			DRM_DEV_ERROR(dsi->dev,
> -				      "DPHY clock frequency is out of range\n");
> -	}
> -
> -	pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
> -	tmp = pllref;
> -
> -	/*
> -	 * The limits on the PLL divisor are:
> -	 *
> -	 *	5MHz <= (pllref / n) <= 40MHz
> -	 *
> -	 * we walk over these values in descreasing order so that if we hit
> -	 * an exact match for target_mbps it is more likely that "m" will be
> -	 * even.
> -	 *
> -	 * TODO: ensure that "m" is even after this loop.
> -	 */
> -	for (i = pllref / 5; i > (pllref / 40); i--) {
> -		pre = pllref / i;
> -		if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
> -			tmp = target_mbps % pre;
> -			n = i;
> -			m = target_mbps / pre;
> -		}
> -		if (tmp == 0)
> -			break;
> -	}
> -
> -	dsi->lane_mbps = pllref / n * m;
> -	dsi->input_div = n;
> -	dsi->feedback_div = m;
> -
> -	return 0;
> -}
> -
> -static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> -				   struct mipi_dsi_device *device)
> -{
> -	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> -
> -	if (device->lanes > dsi->pdata->max_data_lanes) {
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "the number of data lanes(%u) is too many\n",
> -			      device->lanes);
> -		return -EINVAL;
> -	}
> -
> -	dsi->lanes = device->lanes;
> -	dsi->channel = device->channel;
> -	dsi->format = device->format;
> -	dsi->mode_flags = device->mode_flags;
> -	dsi->panel = of_drm_find_panel(device->dev.of_node);
> -	if (dsi->panel)
> -		return drm_panel_attach(dsi->panel, &dsi->connector);
> -
> -	return -EINVAL;
> -}
> -
> -static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> -				   struct mipi_dsi_device *device)
> -{
> -	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> -
> -	drm_panel_detach(dsi->panel);
> -
> -	return 0;
> -}
> -
> -static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> -				   const struct mipi_dsi_msg *msg)
> -{
> -	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> -	u32 val = 0;
> -
> -	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> -		val |= EN_ACK_RQST;
> -	if (lpm)
> -		val |= CMD_MODE_ALL_LP;
> -
> -	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> -	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> -}
> -
> -static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
> -{
> -	int ret;
> -	u32 val, mask;
> -
> -	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> -				 val, !(val & GEN_CMD_FULL), 1000,
> -				 CMD_PKT_STATUS_TIMEOUT_US);
> -	if (ret < 0) {
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "failed to get available command FIFO\n");
> -		return ret;
> -	}
> -
> -	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
> -
> -	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
> -	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> -				 val, (val & mask) == mask,
> -				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> -	if (ret < 0) {
> -		DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n");
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -
> -static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> -				       const struct mipi_dsi_msg *msg)
> -{
> -	const u8 *tx_buf = msg->tx_buf;
> -	u16 data = 0;
> -	u32 val;
> -
> -	if (msg->tx_len > 0)
> -		data |= tx_buf[0];
> -	if (msg->tx_len > 1)
> -		data |= tx_buf[1] << 8;
> -
> -	if (msg->tx_len > 2) {
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "too long tx buf length %zu for short write\n",
> -			      msg->tx_len);
> -		return -EINVAL;
> -	}
> -
> -	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
> -	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> -}
> -
> -static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> -				      const struct mipi_dsi_msg *msg)
> -{
> -	const u8 *tx_buf = msg->tx_buf;
> -	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
> -	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> -	u32 remainder;
> -	u32 val;
> -
> -	if (msg->tx_len < 3) {
> -		DRM_DEV_ERROR(dsi->dev,
> -			      "wrong tx buf length %zu for long write\n",
> -			      msg->tx_len);
> -		return -EINVAL;
> -	}
> -
> -	while (DIV_ROUND_UP(len, pld_data_bytes)) {
> -		if (len < pld_data_bytes) {
> -			remainder = 0;
> -			memcpy(&remainder, tx_buf, len);
> -			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> -			len = 0;
> -		} else {
> -			memcpy(&remainder, tx_buf, pld_data_bytes);
> -			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> -			tx_buf += pld_data_bytes;
> -			len -= pld_data_bytes;
> -		}
> -
> -		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> -					 val, !(val & GEN_PLD_W_FULL), 1000,
> -					 CMD_PKT_STATUS_TIMEOUT_US);
> -		if (ret < 0) {
> -			DRM_DEV_ERROR(dsi->dev,
> -				      "failed to get available write payload FIFO\n");
> -			return ret;
> -		}
> -	}
> -
> -	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
> -}
> -
> -static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
> -					 const struct mipi_dsi_msg *msg)
> -{
> -	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> -	int ret;
> -
> -	dw_mipi_message_config(dsi, msg);
> -
> -	switch (msg->type) {
> -	case MIPI_DSI_DCS_SHORT_WRITE:
> -	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
> -	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> -		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
> -		break;
> -	case MIPI_DSI_DCS_LONG_WRITE:
> -		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
> -		break;
> -	default:
> -		DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n",
> -			      msg->type);
> -		ret = -EINVAL;
> -	}
> -
> -	return ret;
> -}
> -
> -static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
> -	.attach = dw_mipi_dsi_host_attach,
> -	.detach = dw_mipi_dsi_host_detach,
> -	.transfer = dw_mipi_dsi_host_transfer,
> -};
> -
> -static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> -{
> -	u32 val;
> -
> -	val = ENABLE_LOW_POWER;
> -
> -	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> -		val |= VID_MODE_TYPE_BURST;
> -	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> -		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
> -	else
> -		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
> -
> -	dsi_write(dsi, DSI_VID_MODE_CFG, val);
> -}
> -
> -static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> -				 enum dw_mipi_dsi_mode mode)
> -{
> -	if (mode == DW_MIPI_DSI_CMD_MODE) {
> -		dsi_write(dsi, DSI_PWR_UP, RESET);
> -		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> -		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> -	} else {
> -		dsi_write(dsi, DSI_PWR_UP, RESET);
> -		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> -		dw_mipi_dsi_video_mode_config(dsi);
> -		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> -		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> -	}
> -}
> -
> -static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
> -{
> -	dsi_write(dsi, DSI_PWR_UP, RESET);
> -	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
> -}
> -
> -static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> -{
> -	/*
> -	 * The maximum permitted escape clock is 20MHz and it is derived from
> -	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
> -	 *
> -	 *     (lane_mbps >> 3) / esc_clk_division < 20
> -	 * which is:
> -	 *     (lane_mbps >> 3) / 20 > esc_clk_division
> -	 */
> -	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
> -
> -	dsi_write(dsi, DSI_PWR_UP, RESET);
> -	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> -		  | PHY_RSTZ | PHY_SHUTDOWNZ);
> -	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> -		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
> -}
> -
> -static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> -				   struct drm_display_mode *mode)
> -{
> -	u32 val = 0, color = 0;
> -
> -	switch (dsi->format) {
> -	case MIPI_DSI_FMT_RGB888:
> -		color = DPI_COLOR_CODING_24BIT;
> -		break;
> -	case MIPI_DSI_FMT_RGB666:
> -		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
> -		break;
> -	case MIPI_DSI_FMT_RGB666_PACKED:
> -		color = DPI_COLOR_CODING_18BIT_1;
> -		break;
> -	case MIPI_DSI_FMT_RGB565:
> -		color = DPI_COLOR_CODING_16BIT_1;
> -		break;
> -	}
> -
> -	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> -		val |= VSYNC_ACTIVE_LOW;
> -	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> -		val |= HSYNC_ACTIVE_LOW;
> -
> -	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
> -	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
> -	dsi_write(dsi, DSI_DPI_CFG_POL, val);
> -	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
> -		  | INVACT_LPCMD_TIME(4));
> -}
> -
> -static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
> -{
> -	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
> -}
> -
> -static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
> -					    struct drm_display_mode *mode)
> -{
> -	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
> -}
> -
> -static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
> -{
> -	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
> -	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
> -	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> -}
> -
> -/* Get lane byte clock cycles. */
> -static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
> -					   struct drm_display_mode *mode,
> -					   u32 hcomponent)
> -{
> -	u32 frac, lbcc;
> -
> -	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
> -
> -	frac = lbcc % mode->clock;
> -	lbcc = lbcc / mode->clock;
> -	if (frac)
> -		lbcc++;
> -
> -	return lbcc;
> -}
> -
> -static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
> -					  struct drm_display_mode *mode)
> -{
> -	u32 htotal, hsa, hbp, lbcc;
> -
> -	htotal = mode->htotal;
> -	hsa = mode->hsync_end - mode->hsync_start;
> -	hbp = mode->htotal - mode->hsync_end;
> -
> -	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
> -	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
> -
> -	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
> -	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
> -
> -	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
> -	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
> -}
> -
> -static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
> -					       struct drm_display_mode *mode)
> -{
> -	u32 vactive, vsa, vfp, vbp;
> -
> -	vactive = mode->vdisplay;
> -	vsa = mode->vsync_end - mode->vsync_start;
> -	vfp = mode->vsync_start - mode->vdisplay;
> -	vbp = mode->vtotal - mode->vsync_end;
> -
> -	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
> -	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
> -	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
> -	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
> -}
> -
> -static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
> -{
> -	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
> -		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
> -
> -	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
> -		  | PHY_CLKLP2HS_TIME(0x40));
> -}
> -
> -static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
> -{
> -	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
> -		  N_LANES(dsi->lanes));
> -}
> -
> -static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
> -{
> -	dsi_read(dsi, DSI_INT_ST0);
> -	dsi_read(dsi, DSI_INT_ST1);
> -	dsi_write(dsi, DSI_INT_MSK0, 0);
> -	dsi_write(dsi, DSI_INT_MSK1, 0);
> -}
> -
> -static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> -{
> -	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> -
> -	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
> -		return;
> -
> -	if (clk_prepare_enable(dsi->pclk)) {
> -		DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
> -		return;
> -	}
> -
> -	drm_panel_disable(dsi->panel);
> -
> -	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> -	drm_panel_unprepare(dsi->panel);
> -
> -	dw_mipi_dsi_disable(dsi);
> -	pm_runtime_put(dsi->dev);
> -	clk_disable_unprepare(dsi->pclk);
> -	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> -}
> -
> -static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
> -{
> -	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> -	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> -	const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata;
> -	int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
> -	u32 val;
> -	int ret;
> -
> -	ret = dw_mipi_dsi_get_lane_bps(dsi, mode);
> -	if (ret < 0)
> -		return;
> -
> -	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> -		return;
> -
> -	if (clk_prepare_enable(dsi->pclk)) {
> -		DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
> -		return;
> -	}
> -
> -	pm_runtime_get_sync(dsi->dev);
> -	dw_mipi_dsi_init(dsi);
> -	dw_mipi_dsi_dpi_config(dsi, mode);
> -	dw_mipi_dsi_packet_handler_config(dsi);
> -	dw_mipi_dsi_video_mode_config(dsi);
> -	dw_mipi_dsi_video_packet_config(dsi, mode);
> -	dw_mipi_dsi_command_mode_config(dsi);
> -	dw_mipi_dsi_line_timer_config(dsi, mode);
> -	dw_mipi_dsi_vertical_timing_config(dsi, mode);
> -	dw_mipi_dsi_dphy_timing_config(dsi);
> -	dw_mipi_dsi_dphy_interface_config(dsi);
> -	dw_mipi_dsi_clear_err(dsi);
> -
> -	/*
> -	 * For the RK3399, the clk of grf must be enabled before writing grf
> -	 * register. And for RK3288 or other soc, this grf_clk must be NULL,
> -	 * the clk_prepare_enable return true directly.
> -	 */
> -	ret = clk_prepare_enable(dsi->grf_clk);
> -	if (ret) {
> -		DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
> -		return;
> -	}
> -
> -	if (pdata->grf_dsi0_mode_reg)
> -		regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
> -			     pdata->grf_dsi0_mode);
> -
> -	dw_mipi_dsi_phy_init(dsi);
> -	dw_mipi_dsi_wait_for_two_frames(mode);
> -
> -	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> -	if (drm_panel_prepare(dsi->panel))
> -		DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n");
> -
> -	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> -	drm_panel_enable(dsi->panel);
> -
> -	clk_disable_unprepare(dsi->pclk);
> -
> -	if (mux)
> -		val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16);
> -	else
> -		val = pdata->dsi0_en_bit << 16;
> -
> -	regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
> -	DRM_DEV_DEBUG(dsi->dev,
> -		      "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
> -	dsi->dpms_mode = DRM_MODE_DPMS_ON;
> -
> -	clk_disable_unprepare(dsi->grf_clk);
> -}
> -
> -static int
> -dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> -				 struct drm_crtc_state *crtc_state,
> -				 struct drm_connector_state *conn_state)
> -{
> -	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
> -	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> -
> -	switch (dsi->format) {
> -	case MIPI_DSI_FMT_RGB888:
> -		s->output_mode = ROCKCHIP_OUT_MODE_P888;
> -		break;
> -	case MIPI_DSI_FMT_RGB666:
> -		s->output_mode = ROCKCHIP_OUT_MODE_P666;
> -		break;
> -	case MIPI_DSI_FMT_RGB565:
> -		s->output_mode = ROCKCHIP_OUT_MODE_P565;
> -		break;
> -	default:
> -		WARN_ON(1);
> -		return -EINVAL;
> -	}
> -
> -	s->output_type = DRM_MODE_CONNECTOR_DSI;
> -
> -	return 0;
> -}
> -
> -static const struct drm_encoder_helper_funcs
> -dw_mipi_dsi_encoder_helper_funcs = {
> -	.enable = dw_mipi_dsi_encoder_enable,
> -	.disable = dw_mipi_dsi_encoder_disable,
> -	.atomic_check = dw_mipi_dsi_encoder_atomic_check,
> -};
> -
> -static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
> -	.destroy = drm_encoder_cleanup,
> -};
> -
> -static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
> -{
> -	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> -
> -	return drm_panel_get_modes(dsi->panel);
> -}
> -
> -static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
> -	.get_modes = dw_mipi_dsi_connector_get_modes,
> -};
> -
> -static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
> -{
> -	drm_connector_unregister(connector);
> -	drm_connector_cleanup(connector);
> -}
> -
> -static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
> -	.fill_modes = drm_helper_probe_single_connector_modes,
> -	.destroy = dw_mipi_dsi_drm_connector_destroy,
> -	.reset = drm_atomic_helper_connector_reset,
> -	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> -	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> -};
> -
> -static int dw_mipi_dsi_register(struct drm_device *drm,
> -				struct dw_mipi_dsi *dsi)
> -{
> -	struct drm_encoder *encoder = &dsi->encoder;
> -	struct drm_connector *connector = &dsi->connector;
> -	struct device *dev = dsi->dev;
> -	int ret;
> -
> -	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
> -							     dev->of_node);
> -	/*
> -	 * If we failed to find the CRTC(s) which this encoder is
> -	 * supposed to be connected to, it's because the CRTC has
> -	 * not been registered yet.  Defer probing, and hope that
> -	 * the required CRTC is added later.
> -	 */
> -	if (encoder->possible_crtcs == 0)
> -		return -EPROBE_DEFER;
> -
> -	drm_encoder_helper_add(&dsi->encoder,
> -			       &dw_mipi_dsi_encoder_helper_funcs);
> -	ret = drm_encoder_init(drm, &dsi->encoder, &dw_mipi_dsi_encoder_funcs,
> -			       DRM_MODE_ENCODER_DSI, NULL);
> -	if (ret) {
> -		DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n");
> -		return ret;
> -	}
> -
> -	drm_connector_helper_add(connector,
> -				 &dw_mipi_dsi_connector_helper_funcs);
> -
> -	drm_connector_init(drm, &dsi->connector,
> -			   &dw_mipi_dsi_atomic_connector_funcs,
> -			   DRM_MODE_CONNECTOR_DSI);
> -
> -	drm_mode_connector_attach_encoder(connector, encoder);
> -
> -	return 0;
> -}
> -
> -static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
> -{
> -	struct device_node *np = dsi->dev->of_node;
> -
> -	dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> -	if (IS_ERR(dsi->grf_regmap)) {
> -		DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n");
> -		return PTR_ERR(dsi->grf_regmap);
> -	}
> -
> -	return 0;
> -}
> -
> -static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
> -	.dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
> -	.dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
> -	.grf_switch_reg = RK3288_GRF_SOC_CON6,
> -	.max_data_lanes = 4,
> -};
> -
> -static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
> -	.dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT,
> -	.dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT,
> -	.grf_switch_reg = RK3399_GRF_SOC_CON20,
> -	.grf_dsi0_mode = RK3399_GRF_DSI_MODE,
> -	.grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
> -	.flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
> -	.max_data_lanes = 4,
> -};
> -
> -static const struct of_device_id dw_mipi_dsi_dt_ids[] = {
> -	{
> -	 .compatible = "rockchip,rk3288-mipi-dsi",
> -	 .data = &rk3288_mipi_dsi_drv_data,
> -	}, {
> -	 .compatible = "rockchip,rk3399-mipi-dsi",
> -	 .data = &rk3399_mipi_dsi_drv_data,
> -	},
> -	{ /* sentinel */ }
> -};
> -MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids);
> -
> -static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
> -			    void *data)
> -{
> -	const struct of_device_id *of_id =
> -			of_match_device(dw_mipi_dsi_dt_ids, dev);
> -	const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
> -	struct platform_device *pdev = to_platform_device(dev);
> -	struct reset_control *apb_rst;
> -	struct drm_device *drm = data;
> -	struct dw_mipi_dsi *dsi;
> -	struct resource *res;
> -	int ret;
> -
> -	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> -	if (!dsi)
> -		return -ENOMEM;
> -
> -	dsi->dev = dev;
> -	dsi->pdata = pdata;
> -	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> -
> -	ret = rockchip_mipi_parse_dt(dsi);
> -	if (ret)
> -		return ret;
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!res)
> -		return -ENODEV;
> -
> -	dsi->base = devm_ioremap_resource(dev, res);
> -	if (IS_ERR(dsi->base))
> -		return PTR_ERR(dsi->base);
> -
> -	dsi->pllref_clk = devm_clk_get(dev, "ref");
> -	if (IS_ERR(dsi->pllref_clk)) {
> -		ret = PTR_ERR(dsi->pllref_clk);
> -		DRM_DEV_ERROR(dev,
> -			      "Unable to get pll reference clock: %d\n", ret);
> -		return ret;
> -	}
> -
> -	dsi->pclk = devm_clk_get(dev, "pclk");
> -	if (IS_ERR(dsi->pclk)) {
> -		ret = PTR_ERR(dsi->pclk);
> -		DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret);
> -		return ret;
> -	}
> -
> -	/*
> -	 * Note that the reset was not defined in the initial device tree, so
> -	 * we have to be prepared for it not being found.
> -	 */
> -	apb_rst = devm_reset_control_get(dev, "apb");
> -	if (IS_ERR(apb_rst)) {
> -		ret = PTR_ERR(apb_rst);
> -		if (ret == -ENOENT) {
> -			apb_rst = NULL;
> -		} else {
> -			DRM_DEV_ERROR(dev,
> -				      "Unable to get reset control: %d\n", ret);
> -			return ret;
> -		}
> -	}
> -
> -	if (apb_rst) {
> -		ret = clk_prepare_enable(dsi->pclk);
> -		if (ret) {
> -			DRM_DEV_ERROR(dev, "Failed to enable pclk\n");
> -			return ret;
> -		}
> -
> -		reset_control_assert(apb_rst);
> -		usleep_range(10, 20);
> -		reset_control_deassert(apb_rst);
> -
> -		clk_disable_unprepare(dsi->pclk);
> -	}
> -
> -	if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
> -		dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
> -		if (IS_ERR(dsi->phy_cfg_clk)) {
> -			ret = PTR_ERR(dsi->phy_cfg_clk);
> -			DRM_DEV_ERROR(dev,
> -				      "Unable to get phy_cfg_clk: %d\n", ret);
> -			return ret;
> -		}
> -	}
> -
> -	if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) {
> -		dsi->grf_clk = devm_clk_get(dev, "grf");
> -		if (IS_ERR(dsi->grf_clk)) {
> -			ret = PTR_ERR(dsi->grf_clk);
> -			DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret);
> -			return ret;
> -		}
> -	}
> -
> -	ret = clk_prepare_enable(dsi->pllref_clk);
> -	if (ret) {
> -		DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n");
> -		return ret;
> -	}
> -
> -	ret = dw_mipi_dsi_register(drm, dsi);
> -	if (ret) {
> -		DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret);
> -		goto err_pllref;
> -	}
> -
> -	pm_runtime_enable(dev);
> -
> -	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> -	dsi->dsi_host.dev = dev;
> -	ret = mipi_dsi_host_register(&dsi->dsi_host);
> -	if (ret) {
> -		DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
> -		goto err_cleanup;
> -	}
> -
> -	if (!dsi->panel) {
> -		ret = -EPROBE_DEFER;
> -		goto err_mipi_dsi_host;
> -	}
> -
> -	dev_set_drvdata(dev, dsi);
> -	return 0;
> -
> -err_mipi_dsi_host:
> -	mipi_dsi_host_unregister(&dsi->dsi_host);
> -err_cleanup:
> -	drm_encoder_cleanup(&dsi->encoder);
> -	drm_connector_cleanup(&dsi->connector);
> -err_pllref:
> -	clk_disable_unprepare(dsi->pllref_clk);
> -	return ret;
> -}
> -
> -static void dw_mipi_dsi_unbind(struct device *dev, struct device *master,
> -			       void *data)
> -{
> -	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> -
> -	mipi_dsi_host_unregister(&dsi->dsi_host);
> -	pm_runtime_disable(dev);
> -	clk_disable_unprepare(dsi->pllref_clk);
> -}
> -
> -static const struct component_ops dw_mipi_dsi_ops = {
> -	.bind	= dw_mipi_dsi_bind,
> -	.unbind	= dw_mipi_dsi_unbind,
> -};
> -
> -static int dw_mipi_dsi_probe(struct platform_device *pdev)
> -{
> -	return component_add(&pdev->dev, &dw_mipi_dsi_ops);
> -}
> -
> -static int dw_mipi_dsi_remove(struct platform_device *pdev)
> -{
> -	component_del(&pdev->dev, &dw_mipi_dsi_ops);
> -	return 0;
> -}
> -
> -struct platform_driver dw_mipi_dsi_driver = {
> -	.probe		= dw_mipi_dsi_probe,
> -	.remove		= dw_mipi_dsi_remove,
> -	.driver		= {
> -		.of_match_table = dw_mipi_dsi_dt_ids,
> -		.name	= DRIVER_NAME,
> -	},
> -};
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
> new file mode 100644
> index 0000000..c682ed2
> --- /dev/null
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
> @@ -0,0 +1,764 @@
> +/*
> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
> + * Author:
> + *      Chris Zhong <zyw@rock-chips.com>
> + *      Nickey Yang <nickey.yang@rock-chips.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + *
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/math64.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <video/mipi_display.h>
> +#include <linux/regmap.h>
> +#include <drm/drm_of.h>
> +#include <linux/mfd/syscon.h>
> +
> +#include "rockchip_drm_drv.h"
> +#include "rockchip_drm_vop.h"
> +
> +#define DSI_PHY_TST_CTRL0		0xb4
> +#define PHY_TESTCLK			BIT(1)
> +#define PHY_UNTESTCLK			0
> +#define PHY_TESTCLR			BIT(0)
> +#define PHY_UNTESTCLR			0
> +
> +#define DSI_PHY_TST_CTRL1		0xb8
> +#define PHY_TESTEN			BIT(16)
> +#define PHY_UNTESTEN			0
> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
> +
> +#define BYPASS_VCO_RANGE	BIT(7)
> +#define VCO_RANGE_CON_SEL(val)	(((val) & 0x7) << 3)
> +#define VCO_IN_CAP_CON_DEFAULT	(0x0 << 1)
> +#define VCO_IN_CAP_CON_LOW	(0x1 << 1)
> +#define VCO_IN_CAP_CON_HIGH	(0x2 << 1)
> +#define REF_BIAS_CUR_SEL	BIT(0)
> +
> +#define CP_CURRENT_3UA	0x1
> +#define CP_CURRENT_4_5UA	0x2
> +#define CP_CURRENT_7_5UA	0x6
> +#define CP_CURRENT_6UA	0x9
> +#define CP_CURRENT_12UA	0xb
> +#define CP_CURRENT_SEL(val)	((val) & 0xf)
> +#define CP_PROGRAM_EN		BIT(7)
> +
> +#define LPF_RESISTORS_15_5KOHM	0x1
> +#define LPF_RESISTORS_13KOHM	0x2
> +#define LPF_RESISTORS_11_5KOHM	0x4
> +#define LPF_RESISTORS_10_5KOHM	0x8
> +#define LPF_RESISTORS_8KOHM	0x10
> +#define LPF_PROGRAM_EN		BIT(6)
> +#define LPF_RESISTORS_SEL(val)	((val) & 0x3f)
> +
> +#define HSFREQRANGE_SEL(val)	(((val) & 0x3f) << 1)
> +
> +#define INPUT_DIVIDER(val)	(((val) - 1) & 0x7f)
> +#define LOW_PROGRAM_EN		0
> +#define HIGH_PROGRAM_EN		BIT(7)
> +#define LOOP_DIV_LOW_SEL(val)	(((val) - 1) & 0x1f)
> +#define LOOP_DIV_HIGH_SEL(val)	((((val) - 1) >> 5) & 0xf)
> +#define PLL_LOOP_DIV_EN		BIT(5)
> +#define PLL_INPUT_DIV_EN	BIT(4)
> +
> +#define POWER_CONTROL		BIT(6)
> +#define INTERNAL_REG_CURRENT	BIT(3)
> +#define BIAS_BLOCK_ON		BIT(2)
> +#define BANDGAP_ON		BIT(0)
> +
> +#define TER_RESISTOR_HIGH	BIT(7)
> +#define	TER_RESISTOR_LOW	0
> +#define LEVEL_SHIFTERS_ON	BIT(6)
> +#define TER_CAL_DONE		BIT(5)
> +#define SETRD_MAX		(0x7 << 2)
> +#define POWER_MANAGE		BIT(1)
> +#define TER_RESISTORS_ON	BIT(0)
> +
> +#define BIASEXTR_SEL(val)	((val) & 0x7)
> +#define BANDGAP_SEL(val)	((val) & 0x7)
> +#define TLP_PROGRAM_EN		BIT(7)
> +#define THS_PRE_PROGRAM_EN	BIT(7)
> +#define THS_ZERO_PROGRAM_EN	BIT(6)
> +
> +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL	0x10
> +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS	0x11
> +#define PLL_LPF_AND_CP_CONTROL	0x12
> +#define PLL_INPUT_DIVIDER_RATIO	0x17
> +#define PLL_LOOP_DIVIDER_RATIO	0x18
> +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL	0x19
> +#define BANDGAP_AND_BIAS_CONTROL	0x20
> +#define TERMINATION_RESISTER_CONTROL	0x21
> +#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY	0x22
> +#define HS_RX_CONTROL_OF_LANE_0	0x44
> +#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL	0x60
> +#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL	0x61
> +#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL	0x62
> +#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL	0x63
> +#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL	0x64
> +#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL	0x65
> +#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL	0x70
> +#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL	0x71
> +#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL	0x72
> +#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL	0x73
> +#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL	0x74
> +
> +#define DW_MIPI_NEEDS_PHY_CFG_CLK	BIT(0)
> +#define DW_MIPI_NEEDS_GRF_CLK		BIT(1)
> +
> +#define RK3288_GRF_SOC_CON6		0x025c
> +#define RK3288_DSI0_SEL_VOP_LIT		BIT(6)
> +#define RK3288_DSI1_SEL_VOP_LIT		BIT(9)
> +
> +#define RK3399_GRF_SOC_CON20		0x6250
> +#define RK3399_DSI0_SEL_VOP_LIT		BIT(0)
> +#define RK3399_DSI1_SEL_VOP_LIT		BIT(4)
> +
> +/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
> +#define RK3399_GRF_SOC_CON22		0x6258
> +#define RK3399_GRF_DSI_MODE		0xffff0000
> +
> +#define to_dsi(nm)	container_of(nm, struct dw_mipi_dsi_rockchip, nm)
> +
> +enum {
> +	BANDGAP_97_07,
> +	BANDGAP_98_05,
> +	BANDGAP_99_02,
> +	BANDGAP_100_00,
> +	BANDGAP_93_17,
> +	BANDGAP_94_15,
> +	BANDGAP_95_12,
> +	BANDGAP_96_10,
> +};
> +
> +enum {
> +	BIASEXTR_87_1,
> +	BIASEXTR_91_5,
> +	BIASEXTR_95_9,
> +	BIASEXTR_100,
> +	BIASEXTR_105_94,
> +	BIASEXTR_111_88,
> +	BIASEXTR_118_8,
> +	BIASEXTR_127_7,
> +};
> +
> +struct rockchip_dw_dsi_chip_data {
> +	u32 dsi0_en_bit;
> +	u32 dsi1_en_bit;
> +	u32 grf_switch_reg;
> +	u32 grf_dsi0_mode;
> +	u32 grf_dsi0_mode_reg;
> +	unsigned int flags;
> +	unsigned int max_data_lanes;
> +};
> +
> +struct dw_mipi_dsi_rockchip {
> +	struct device *dev;
> +	struct drm_encoder encoder;
> +	void __iomem *base;
> +
> +	struct regmap *grf_regmap;
> +	struct clk *pllref_clk;
> +	struct clk *grf_clk;
> +	struct clk *phy_cfg_clk;
> +
> +	unsigned int lane_mbps; /* per lane */
> +	u16 input_div;
> +	u16 feedback_div;
> +	u32 format;
> +
> +	struct dw_mipi_dsi *dmd;
> +	const struct rockchip_dw_dsi_chip_data *cdata;
> +	struct dw_mipi_dsi_plat_data pdata;
> +};
> +
> +struct dphy_pll_parameter_map {
> +	unsigned int max_mbps;
> +	u8 hsfreqrange;
> +	u8 icpctrl;
> +	u8 lpfctrl;
> +};
> +
> +/* The table is based on 27MHz DPHY pll reference clock. */
> +static const struct dphy_pll_parameter_map dppa_map[] = {
> +	{  89, 0x00, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM },
> +	{  99, 0x10, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM },
> +	{ 109, 0x20, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM },
> +	{ 129, 0x01, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
> +	{ 139, 0x11, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
> +	{ 149, 0x21, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
> +	{ 169, 0x02, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM },
> +	{ 179, 0x12, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM },
> +	{ 199, 0x22, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM },
> +	{ 219, 0x03, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM },
> +	{ 239, 0x13, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM },
> +	{ 249, 0x23, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM },
> +	{ 269, 0x04, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM },
> +	{ 299, 0x14, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM },
> +	{ 329, 0x05, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
> +	{ 359, 0x15, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
> +	{ 399, 0x25, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM },
> +	{ 449, 0x06, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 499, 0x16, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 549, 0x07, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM },
> +	{ 599, 0x17, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM },
> +	{ 649, 0x08, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 699, 0x18, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 749, 0x09, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 799, 0x19, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 849, 0x29, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 899, 0x39, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM },
> +	{ 949, 0x0a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
> +	{ 999, 0x1a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
> +	{1049, 0x2a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
> +	{1099, 0x3a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM },
> +	{1149, 0x0b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1199, 0x1b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1249, 0x2b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1299, 0x3b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1349, 0x0c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1399, 0x1c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1449, 0x2c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM },
> +	{1500, 0x3c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM }
> +};
> +
> +static int max_mbps_to_parameter(unsigned int max_mbps)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(dppa_map); i++)
> +		if (dppa_map[i].max_mbps >= max_mbps)
> +			return i;
> +
> +	return -EINVAL;
> +}
> +
> +static inline void dsi_write(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 val)
> +{
> +	writel(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi_rockchip *dsi, u32 reg)
> +{
> +	return readl(dsi->base + reg);
> +}
> +
> +static inline void dsi_set(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 mask)
> +{
> +	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
> +}
> +
> +static inline void dsi_update_bits(struct dw_mipi_dsi_rockchip *dsi, u32 reg,
> +				   u32 mask, u32 val)
> +{
> +	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
> +}
> +
> +static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_rockchip *dsi,
> +				  u8 test_code,
> +				  u8 test_data)
> +{
> +	/*
> +	 * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
> +	 * is latched internally as the current test code. Test data is
> +	 * programmed internally by rising edge on TESTCLK.
> +	 */
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> +
> +	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
> +					  PHY_TESTDIN(test_code));
> +
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +
> +	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> +					  PHY_TESTDIN(test_data));
> +
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> +}
> +
> +/**
> + * ns2bc - Nanoseconds to byte clock cycles
> + */
> +static inline unsigned int ns2bc(struct dw_mipi_dsi_rockchip *dsi, int ns)
> +{
> +	return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
> +}
> +
> +/**
> + * ns2ui - Nanoseconds to UI time periods
> + */
> +static inline unsigned int ns2ui(struct dw_mipi_dsi_rockchip *dsi, int ns)
> +{
> +	return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000);
> +}
> +
> +static int dw_mipi_dsi_phy_init(void *priv_data)
> +{
> +	struct dw_mipi_dsi_rockchip *dsi = priv_data;
> +	int ret, i, vco;
> +
> +	vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;

Please add a clarifying comment as requested by Sean on
https://chromium-review.googlesource.com/#/c/chromiumos/third_party/kernel/+/780120/

> +	i = max_mbps_to_parameter(dsi->lane_mbps);
> +	if (i < 0) {
> +		DRM_DEV_ERROR(dsi->dev,
> +			      "failed to get parameter for %dmbps clock\n",
> +			      dsi->lane_mbps);
> +		return i;
> +	}
> +
> +	ret = clk_prepare_enable(dsi->phy_cfg_clk);
> +	if (ret) {
> +		DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
> +		return ret;
> +	}
> +
> +	dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
> +			      BYPASS_VCO_RANGE |
> +			      VCO_RANGE_CON_SEL(vco) |
> +			      VCO_IN_CAP_CON_LOW |
> +			      REF_BIAS_CUR_SEL);
> +
> +	dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
> +			      CP_CURRENT_SEL(dppa_map[i].icpctrl));
> +	dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
> +			      CP_PROGRAM_EN | LPF_PROGRAM_EN |
> +			      LPF_RESISTORS_SEL(dppa_map[i].lpfctrl));
> +
> +	dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
> +			      HSFREQRANGE_SEL(dppa_map[i].hsfreqrange));
> +
> +	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
> +			      INPUT_DIVIDER(dsi->input_div));
> +	dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
> +			      LOOP_DIV_LOW_SEL(dsi->feedback_div) |
> +			      LOW_PROGRAM_EN);
> +	/*
> +	 * We need set PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL immediately
> +	 * to make the configured LSB effective according to IP simulation
> +	 * and lab test results.
> +	 * Only in this way can we get correct mipi phy pll frequency.
> +	 */
> +	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
> +			      PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
> +	dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
> +			      LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
> +			      HIGH_PROGRAM_EN);
> +	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
> +			      PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
> +
> +	dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
> +			      LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7));
> +	dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
> +			      HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10));
> +
> +	dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
> +			      POWER_CONTROL | INTERNAL_REG_CURRENT |
> +			      BIAS_BLOCK_ON | BANDGAP_ON);
> +
> +	dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
> +			      TER_RESISTOR_LOW | TER_CAL_DONE |
> +			      SETRD_MAX | TER_RESISTORS_ON);
> +	dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
> +			      TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
> +			      SETRD_MAX | POWER_MANAGE |
> +			      TER_RESISTORS_ON);
> +
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL,
> +			      TLP_PROGRAM_EN | ns2bc(dsi, 500));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL,
> +			      THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL,
> +			      THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL,
> +			      THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL,
> +			      BIT(5) | ns2bc(dsi, 100));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL,
> +			      BIT(5) | (ns2bc(dsi, 60) + 7));
> +
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL,
> +			      TLP_PROGRAM_EN | ns2bc(dsi, 500));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL,
> +			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 20));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL,
> +			      THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL,
> +			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL,
> +			      BIT(5) | ns2bc(dsi, 100));
> +
> +	clk_disable_unprepare(dsi->phy_cfg_clk);
> +
> +	return ret;
> +}
> +
> +static int
> +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
> +			  unsigned long mode_flags, u32 lanes, u32 format,
> +			  unsigned int *lane_mbps)
> +{
> +	struct dw_mipi_dsi_rockchip *dsi = priv_data;
> +	int bpp;
> +	unsigned long mpclk, tmp;
> +	unsigned int target_mbps = 1000;
> +	unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) - 1].max_mbps;
> +	unsigned long best_freq = 0;
> +	unsigned long fvco_min, fvco_max, fin, fout;
> +	unsigned int min_prediv, max_prediv;
> +	unsigned int _prediv, uninitialized_var(best_prediv);
> +	unsigned long _fbdiv, uninitialized_var(best_fbdiv);
> +	unsigned long min_delta = ULONG_MAX;
> +
> +	dsi->format = format;
> +	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> +	if (bpp < 0) {
> +		DRM_DEV_ERROR(dsi->dev,
> +			      "failed to get bpp for pixel format %d\n",
> +			      dsi->format);
> +		return bpp;
> +	}
> +
> +	mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
> +	if (mpclk) {
> +		/* take 1 / 0.8, since mbps must big than bandwidth of RGB */
> +		tmp = mpclk * (bpp / lanes) * 10 / 8;
> +		if (tmp < max_mbps)
> +			target_mbps = tmp;
> +		else
> +			DRM_DEV_ERROR(dsi->dev,
> +				      "DPHY clock frequency is out of range\n");
> +	}
> +
> +	fin = clk_get_rate(dsi->pllref_clk);
> +	fout = target_mbps * USEC_PER_SEC;
> +
> +	/* constraint: 5Mhz <= Fref / N <= 40MHz */
> +	min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC);
> +	max_prediv = fin / (5 * USEC_PER_SEC);
> +
> +	/* constraint: 80MHz <= Fvco <= 1500Mhz */
> +	fvco_min = 80 * USEC_PER_SEC;
> +	fvco_max = 1500 * USEC_PER_SEC;
> +
> +	for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) {
> +		u64 tmp;
> +		u32 delta;
> +		/* Fvco = Fref * M / N */
> +		tmp = (u64)fout * _prediv;
> +		do_div(tmp, fin);
> +		_fbdiv = tmp;
> +		/*
> +		 * Due to the use of a "by 2 pre-scaler," the range of the
> +		 * feedback multiplication value M is limited to even division
> +		 * numbers, and m must be greater than 6, less than 512.
> +		 */

It seems this should be "not bigger than 512" or something similar.

> +		if (_fbdiv < 6 || _fbdiv > 512)
> +			continue;
> +
> +		_fbdiv += _fbdiv % 2;
> +
> +		tmp = (u64)_fbdiv * fin;
> +		do_div(tmp, _prediv);

Should we bail out early if min_prediv == 0 due to some bogus
configuration of pllref_clk?

> +		if (tmp < fvco_min || tmp > fvco_max)
> +			continue;
> +
> +		delta = abs(fout - tmp);
> +		if (delta < min_delta) {
> +			best_prediv = _prediv;
> +			best_fbdiv = _fbdiv;
> +			min_delta = delta;
> +			best_freq = tmp;
> +		}
> +	}
> +
> +	if (best_freq) {
> +		dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC);
> +		*lane_mbps = dsi->lane_mbps;
> +		dsi->input_div = best_prediv;
> +		dsi->feedback_div = best_fbdiv;
> +	} else {
> +		DRM_DEV_ERROR(dsi->dev, "Can not find best_freq for DPHY\n");

return -1;

> +	}
> +
> +	return 0;
> +}
> +
> +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops = {
> +	.init = dw_mipi_dsi_phy_init,
> +	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
> +};
> +
> +static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
> +					 struct drm_display_mode *mode,
> +					 struct drm_display_mode *adjusted)
> +{
> +	struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
> +	const struct rockchip_dw_dsi_chip_data *cdata = dsi->cdata;
> +	int val, ret, mux;
> +
> +	mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node,
> +						&dsi->encoder);
> +	if (mux < 0)
> +		return;
> +	/*
> +	 * For the RK3399, the clk of grf must be enabled before writing grf
> +	 * register. And for RK3288 or other soc, this grf_clk must be NULL,
> +	 * the clk_prepare_enable return true directly.
> +	 */
> +	ret = clk_prepare_enable(dsi->grf_clk);
> +	if (ret) {
> +		DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
> +		return;
> +	}
> +
> +	val = cdata->dsi0_en_bit << 16;
> +	if (mux)
> +		val |= cdata->dsi0_en_bit;
> +	regmap_write(dsi->grf_regmap, cdata->grf_switch_reg, val);
> +
> +	if (cdata->grf_dsi0_mode_reg)
> +		regmap_write(dsi->grf_regmap, cdata->grf_dsi0_mode_reg,
> +			     cdata->grf_dsi0_mode);
> +
> +	clk_disable_unprepare(dsi->grf_clk);
> +}
> +
> +static int
> +dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> +				 struct drm_crtc_state *crtc_state,
> +				 struct drm_connector_state *conn_state)
> +{
> +	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
> +	struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
> +
> +	switch (dsi->format) {
> +	case MIPI_DSI_FMT_RGB888:
> +		s->output_mode = ROCKCHIP_OUT_MODE_P888;
> +		break;
> +	case MIPI_DSI_FMT_RGB666:
> +		s->output_mode = ROCKCHIP_OUT_MODE_P666;
> +		break;
> +	case MIPI_DSI_FMT_RGB565:
> +		s->output_mode = ROCKCHIP_OUT_MODE_P565;
> +		break;
> +	default:
> +		WARN_ON(1);
> +		return -EINVAL;
> +	}
> +
> +	s->output_type = DRM_MODE_CONNECTOR_DSI;
> +
> +	return 0;
> +}
> +
> +static const struct drm_encoder_helper_funcs
> +dw_mipi_dsi_encoder_helper_funcs = {
> +	.mode_set = dw_mipi_dsi_encoder_mode_set,
> +	.atomic_check = dw_mipi_dsi_encoder_atomic_check,
> +};
> +
> +static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
> +static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi,
> +					   struct drm_device *drm_dev)
> +{
> +	struct drm_encoder *encoder = &dsi->encoder;
> +	int ret;
> +
> +	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
> +							     dsi->dev->of_node);
> +
> +	ret = drm_encoder_init(drm_dev, encoder, &dw_mipi_dsi_encoder_funcs,
> +			       DRM_MODE_ENCODER_DSI, NULL);
> +	if (ret) {
> +		DRM_ERROR("Failed to initialize encoder with drm\n");
> +		return ret;
> +	}
> +
> +	drm_encoder_helper_add(encoder, &dw_mipi_dsi_encoder_helper_funcs);
> +
> +	return 0;
> +}
> +
> +static int dw_mipi_dsi_rockchip_bind(struct device *dev,
> +				     struct device *master,
> +				     void *data)
> +{
> +	struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct drm_device *drm_dev = data;
> +	int ret;
> +
> +	dsi->pdata.base = dsi->base;
> +	dsi->pdata.max_data_lanes = dsi->cdata->max_data_lanes;
> +	dsi->pdata.phy_ops = &dw_mipi_dsi_rockchip_phy_ops;
> +	dsi->pdata.priv_data = dsi;
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev,
> +			      "%s: Failed to enable pllref_clk\n", __func__);
> +		return ret;
> +	}
> +
> +	ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
> +	if (ret) {
> +		DRM_ERROR("Failed to create drm encoder\n");
> +		goto err_pllref;
> +	}
> +
> +	dsi->dmd = dw_mipi_dsi_bind(pdev, &dsi->encoder, &dsi->pdata);
> +	if (IS_ERR(dsi->dmd)) {
> +		DRM_ERROR("Failed to bind\n");
> +		ret = PTR_ERR(dsi->dmd);
> +		goto err_pllref;
> +	}
> +	return 0;
> +
> +err_pllref:
> +	clk_disable_unprepare(dsi->pllref_clk);
> +	return ret;
> +}
> +
> +static void dw_mipi_dsi_rockchip_unbind(struct device *dev,
> +					struct device *master,
> +					void *data)
> +{
> +	struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
> +
> +	dw_mipi_dsi_unbind(dsi->dmd);
> +	clk_disable_unprepare(dsi->pllref_clk);
> +}
> +
> +static const struct component_ops dw_mipi_dsi_rockchip_ops = {
> +	.bind	= dw_mipi_dsi_rockchip_bind,
> +	.unbind	= dw_mipi_dsi_rockchip_unbind,
> +};
> +
> +static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct dw_mipi_dsi_rockchip *dsi;
> +	struct resource *res;
> +	const struct rockchip_dw_dsi_chip_data *cdata =
> +				of_device_get_match_data(dev);
> +	int ret;
> +
> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		DRM_ERROR("Unable to get resource\n");
> +		return -ENODEV;
> +	}
> +
> +	dsi->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(dsi->base)) {
> +		DRM_ERROR("Unable to get dsi registers\n");
> +		return PTR_ERR(dsi->base);
> +	}
> +
> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> +	if (IS_ERR(dsi->pllref_clk)) {
> +		ret = PTR_ERR(dsi->pllref_clk);
> +		DRM_DEV_ERROR(dev,
> +			      "Unable to get pll reference clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (cdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
> +		dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
> +		if (IS_ERR(dsi->phy_cfg_clk)) {
> +			ret = PTR_ERR(dsi->phy_cfg_clk);
> +			DRM_DEV_ERROR(dev,
> +				      "Unable to get phy_cfg_clk: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	if (cdata->flags & DW_MIPI_NEEDS_GRF_CLK) {
> +		dsi->grf_clk = devm_clk_get(dev, "grf");
> +		if (IS_ERR(dsi->grf_clk)) {
> +			ret = PTR_ERR(dsi->grf_clk);
> +			DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> +	if (IS_ERR(dsi->grf_regmap)) {
> +		DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n");
> +		return PTR_ERR(dsi->grf_regmap);
> +	}
> +
> +	dsi->cdata = cdata;
> +	dsi->dev = dev;
> +	dev_set_drvdata(dev, dsi);
> +
> +	return component_add(&pdev->dev, &dw_mipi_dsi_rockchip_ops);
> +}
> +
> +static int dw_mipi_dsi_rockchip_remove(struct platform_device *pdev)
> +{
> +	component_del(&pdev->dev, &dw_mipi_dsi_rockchip_ops);
> +
> +	return 0;
> +}
> +
> +static struct rockchip_dw_dsi_chip_data rk3288_chip_data = {
> +	.dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
> +	.dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
> +	.grf_switch_reg = RK3288_GRF_SOC_CON6,
> +	.max_data_lanes = 4,
> +};
> +
> +static struct rockchip_dw_dsi_chip_data rk3399_chip_data = {
> +	.dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT,
> +	.dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT,
> +	.grf_switch_reg = RK3399_GRF_SOC_CON20,
> +	.grf_dsi0_mode = RK3399_GRF_DSI_MODE,
> +	.grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
> +	.flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
> +	.max_data_lanes = 4,
> +};
> +
> +static const struct of_device_id dw_mipi_dsi_rockchip_dt_ids[] = {
> +	{
> +	 .compatible = "rockchip,rk3288-mipi-dsi",
> +	 .data = &rk3288_chip_data,
> +	}, {
> +	 .compatible = "rockchip,rk3399-mipi-dsi",
> +	 .data = &rk3399_chip_data,
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_rockchip_dt_ids);
> +
> +struct platform_driver dw_mipi_dsi_rockchip_driver = {
> +	.probe		= dw_mipi_dsi_rockchip_probe,
> +	.remove		= dw_mipi_dsi_rockchip_remove,
> +	.driver		= {
> +		.of_match_table = dw_mipi_dsi_rockchip_dt_ids,
> +		.name	= "dw-mipi-dsi-rockchip",
> +	},
> +};
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> index 76d63de..d40cc39 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> @@ -462,7 +462,7 @@ static int __init rockchip_drm_init(void)
>  	ADD_ROCKCHIP_SUB_DRIVER(cdn_dp_driver, CONFIG_ROCKCHIP_CDN_DP);
>  	ADD_ROCKCHIP_SUB_DRIVER(dw_hdmi_rockchip_pltfm_driver,
>  				CONFIG_ROCKCHIP_DW_HDMI);
> -	ADD_ROCKCHIP_SUB_DRIVER(dw_mipi_dsi_driver,
> +	ADD_ROCKCHIP_SUB_DRIVER(dw_mipi_dsi_rockchip_driver,
>  				CONFIG_ROCKCHIP_DW_MIPI_DSI);
>  	ADD_ROCKCHIP_SUB_DRIVER(inno_hdmi_driver, CONFIG_ROCKCHIP_INNO_HDMI);
>  
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
> index 498dfbc..af235b2 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
> @@ -66,7 +66,7 @@ void rockchip_drm_dma_detach_device(struct drm_device *drm_dev,
>  
>  extern struct platform_driver cdn_dp_driver;
>  extern struct platform_driver dw_hdmi_rockchip_pltfm_driver;
> -extern struct platform_driver dw_mipi_dsi_driver;
> +extern struct platform_driver dw_mipi_dsi_rockchip_driver;
>  extern struct platform_driver inno_hdmi_driver;
>  extern struct platform_driver rockchip_dp_driver;
>  extern struct platform_driver rockchip_lvds_driver;