From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751672AbdLAQ4v (ORCPT ); Fri, 1 Dec 2017 11:56:51 -0500 Received: from lelnx193.ext.ti.com ([198.47.27.77]:22838 "EHLO lelnx193.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751432AbdLAQ4r (ORCPT ); Fri, 1 Dec 2017 11:56:47 -0500 From: Dan Murphy To: , , CC: , , Dan Murphy Subject: [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard Date: Fri, 1 Dec 2017 10:56:11 -0600 Message-ID: <20171201165613.10358-4-dmurphy@ti.com> X-Mailer: git-send-email 2.12.2 In-Reply-To: <20171201165613.10358-1-dmurphy@ti.com> References: <20171201165613.10358-1-dmurphy@ti.com> MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Update the lp8860 dt binding to the LED standard where the LED should have a child node and also adding a LED trigger entry. Signed-off-by: Dan Murphy --- v6 - New patch to fix binding documentation Documentation/devicetree/bindings/leds/leds-lp8860.txt | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt index aad38dd94d4b..4cf396de6eba 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -12,17 +12,24 @@ Required properties: - label - Used for naming LEDs Optional properties: - - enable-gpio - gpio pin to enable/disable the device. - - supply - "vled" - LED supply + - enable-gpios : gpio pin to enable/disable the device. + - vled-supply : LED supply + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt Example: -leds: leds@6 { +lp8860@2d { compatible = "ti,lp8860"; reg = <0x2d>; - label = "display_cluster"; enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + + backlight: backlight@0 { + label = "backlight_cluster"; + linux,default-trigger = "backlight"; + }; } For more product information please see the link below: -- 2.15.0.124.g7668cbc60