[PATCH v2 15/15] NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology

[Serge Semin <fancer.lancer@gmail.com>]

Since Switchtec patch there has been a new topology added to
the NTB API. It's called NTB_TOPO_SWITCH and dedicated for
in general multi-port PCIe switch chips. Even though topo field
isn't used within the IDT driver much, lets set it for the sake
of unification.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
 drivers/ntb/hw/idt/ntb_hw_idt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
index d87dbd4bc82c..27fdd14e0dca 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.c
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -2070,7 +2070,7 @@ static int idt_register_device(struct idt_ntb_dev *ndev)
 
 	/* Initialize the rest of NTB device structure and register it */
 	ndev->ntb.ops = &idt_ntb_ops;
-	ndev->ntb.topo = NTB_TOPO_PRI;
+	ndev->ntb.topo = NTB_TOPO_SWITCH;
 
 	ret = ntb_register_device(&ndev->ntb);
 	if (ret != 0) {
-- 
2.12.0