Re: [PATCH v4 00/10] add pinmuxing support for pins in AXP209 and AXP813 PMICs

[Maxime Ripard <maxime.ripard@free-electrons.com>]

[-- Attachment #1: Type: text/plain, Size: 1422 bytes --]

On Sat, Dec 02, 2017 at 05:00:03PM +0100, Linus Walleij wrote:
> On Fri, Dec 1, 2017 at 2:44 PM, Quentin Schulz
> <quentin.schulz@free-electrons.com> wrote:
> 
> > The AXP209 and AXP813 PMICs have several pins (respectively 3 and 2) that can
> > be used either as GPIOs or for other purposes (ADC or LDO here).
> >
> > We already have a GPIO driver for the GPIO use of those pins on the AXP209.
> > Let's "upgrade" this driver to support all the functions these pins can have.
> >
> > Then we add support to this driver for the AXP813 which is slighlty different
> > (basically a different offset in two registers and one less pin).
> >
> > I suggest patches 1 to 8 go through Linus's tree and 9 and 10 via Maxime or
> > Chen-Yu's tree.
> >
> > v4:
> 
> Looks overall good. As soon as Maxime is happy with everything I will
> happily apply 1-8 to the pinctrl tree and then pull it to GPIO as well to
> avoid clashes.
> 
> I think there were some minor comments but it seems almost finished.

You can apply everything with my
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The only comment left is the checkpatch warning, but there's multiple
occurences of that issue in the driver, so it can definitely be done
in a separate patch.

(But please do it Quentin ;))

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]