From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752085AbdLEUn4 (ORCPT ); Tue, 5 Dec 2017 15:43:56 -0500 Received: from lelnx194.ext.ti.com ([198.47.27.80]:22825 "EHLO lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751630AbdLEUnt (ORCPT ); Tue, 5 Dec 2017 15:43:49 -0500 From: Dan Murphy To: , , , , CC: , , , Dan Murphy Subject: [PATCH v2 1/6] dt: bindings: lp8860: Update bindings for lp8860 Date: Tue, 5 Dec 2017 14:43:22 -0600 Message-ID: <20171205204327.12111-2-dmurphy@ti.com> X-Mailer: git-send-email 2.12.2 In-Reply-To: <20171205204327.12111-1-dmurphy@ti.com> References: <20171205204327.12111-1-dmurphy@ti.com> MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Update the lp8860 bindings to fix various issues found. Add address-cells and size-cells, rename enable-gpio to enable-gpios, update the node name to the device name and indent the node example. Signed-off-by: Dan Murphy --- v2 - New patch .../devicetree/bindings/leds/leds-lp8860.txt | 28 ++++++++++++---------- 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt index aad38dd94d4b..1b2fab05ec6a 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -6,24 +6,28 @@ current sinks that can be controlled by a PWM input signal, a SPI/I2C master, or both. Required properties: - - compatible: + - compatible : "ti,lp8860" - - reg - I2C slave address - - label - Used for naming LEDs + - reg : I2C slave address + - label : Used for naming LEDs + - #address-cells : 1 + - #size-cells : 0 Optional properties: - - enable-gpio - gpio pin to enable/disable the device. - - supply - "vled" - LED supply + - enable-gpios : gpio pin to enable/disable the device. + - supply : "vled" - LED supply Example: -leds: leds@6 { - compatible = "ti,lp8860"; - reg = <0x2d>; - label = "display_cluster"; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - vled-supply = <&vbatt>; -} + lp8860@2d { + compatible = "ti,lp8860"; + #address-cells: 1 + #size-cells: 0 + reg = <0x2d>; + label = "display_cluster"; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + } For more product information please see the link below: http://www.ti.com/product/lp8860-q1 -- 2.15.0.124.g7668cbc60