From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755106AbdLFLKe (ORCPT ); Wed, 6 Dec 2017 06:10:34 -0500 Received: from bhuna.collabora.co.uk ([46.235.227.227]:60202 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754858AbdLFLKX (ORCPT ); Wed, 6 Dec 2017 06:10:23 -0500 From: Enric Balletbo i Serra To: MyungJoo Ham , Chanwoo Choi , Lee Jones , Rob Herring , Heiko Stuebner Cc: dianders@google.com, groeck@chromium.org, briannorris@google.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/3] arm64: dts: rockchip: add usb3-phy phandle for dwc3. Date: Wed, 6 Dec 2017 12:10:07 +0100 Message-Id: <20171206111008.3079-2-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20171206111008.3079-1-enric.balletbo@collabora.com> References: <20171206111008.3079-1-enric.balletbo@collabora.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds the usb3-phy for both of the two dwc3 controllers on rk3399. Signed-off-by: Enric Balletbo i Serra --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 17e5e1a..c18ff88 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -397,9 +397,11 @@ #size-cells = <2>; ranges; clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; status = "disabled"; usbdrd_dwc3_0: dwc3 { @@ -407,14 +409,15 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = ; dr_mode = "otg"; - phys = <&u2phy0_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; status = "disabled"; }; }; @@ -425,9 +428,11 @@ #size-cells = <2>; ranges; clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; status = "disabled"; usbdrd_dwc3_1: dwc3 { @@ -435,14 +440,15 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = ; dr_mode = "otg"; - phys = <&u2phy1_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy1_otg>, <&tcphy1_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; status = "disabled"; }; }; @@ -991,6 +997,12 @@ clocks = <&cru HCLK_SDIO>; pm_qos = <&qos_sdioaudio>; }; + pd_usb3@RK3399_PD_USB3 { + reg = ; + clocks = <&cru ACLK_USB3>; + pm_qos = <&qos_usb_otg0>, + <&qos_usb_otg1>; + }; pd_vio@RK3399_PD_VIO { reg = ; #address-cells = <1>; -- 2.9.3