From: Petr Mladek <pmladek@suse.com>
To: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Fengguang Wu <fengguang.wu@intel.com>,
Kevin Hilman <khilman@baylibre.com>,
Mark Brown <broonie@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Subject: Re: [RFC][PATCH] printk: add console_msg_format command line option
Date: Thu, 7 Dec 2017 14:48:44 +0100 [thread overview]
Message-ID: <20171207134844.dkwo4b2tsfj3jxyu@pathway.suse.cz> (raw)
In-Reply-To: <20171201104404.1885-1-sergey.senozhatsky@gmail.com>
On Fri 2017-12-01 19:44:04, Sergey Senozhatsky wrote:
> 0day and kernelCI automatically parse kernel log - basically some sort
> of grepping using the pre-defined text patterns - in order to detect
> and report regressions/errors. There are several sources they get the
> kernel logs from:
>
> a) dmesg or /proc/ksmg
>
> This is the preferred way. Because `dmesg --raw' and /proc/kmsg
> output contains facility and log level, which greatly simplifies
> grepping for EMERG/ALERT/CRIT/ERR messages.
>
> b) serial consoles
>
> This option is harder to maintain, because serial console messages
> don't contain facility and log level.
>
> This patch introduces a `console_msg_format=' command line option,
> to switch between different message formatting on serial consoles.
> For the time being we have just one option - syslog. This option
> makes serial console messages to appear in syslog format, matching
> the `dmesg --raw' and `cat /proc/kmsg' output formats:
I have realized that 'cat /proc/kmsg' did not work. It can be done using:
dd if=/dev/kmsg iflag=nonblock
Also the format is more comlicated here, see printk.c:
* /dev/kmsg exports the structured data in the following line format:
* "<level>,<sequnum>,<timestamp>,<contflag>[,additional_values, ... ];<message text>\n"
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 28467638488d..2dd91c5073f9 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -643,6 +643,16 @@
> console=brl,ttyS0
> For now, only VisioBraille is supported.
>
> + console_msg_format=
> + [KNL] Control message format
> + By default we print messages in "[time stamp] text\n"
> + format (time stamp may not be printed, depending on
> + CONFIG_PRINTK_TIME or `printk_time' param).
> + syslog
> + Switch to syslog format (similar to "dmesg --raw" or
> + reading from /proc/kmsg): "<%u>[time stamp] text\n"
To be precise, it exactly the same as "dmesg -S --raw". Also it is the
format used by SYSLOG_ACTION_READ* actions of the syslog syscall.
Note that it is affected by CONFIG_PRINTK_TIME or "printk_time" command-line
option the same way as the default format.
> + IOW, each message has a facility and loglevel prefix.
> +
> consoleblank= [KNL] The console blank (screen saver) timeout in
> seconds. A value of 0 disables the blank timer.
> Defaults to 0.
> diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
> index 5d81206a572d..012a6b4991a6 100644
> --- a/kernel/printk/printk.c
> +++ b/kernel/printk/printk.c
> @@ -277,6 +277,13 @@ EXPORT_SYMBOL(console_set_on_cmdline);
> /* Flag: console code may call schedule() */
> static int console_may_schedule;
>
> +enum con_msg_format {
> + MSG_FORMAT_DEFAULT = 0,
> + MSG_FORMAT_SYSLOG = (1 << 0),
> +};
> +
> +static int console_msg_format = MSG_FORMAT_DEFAULT;
> +
> /*
> * The printk log buffer consists of a chain of concatenated variable
> * length records. Every record starts with a record header, containing
> @@ -1913,6 +1920,15 @@ static int __add_preferred_console(char *name, int idx, char *options,
> c->index = idx;
> return 0;
> }
> +
> +static int __init console_msg_format_setup(char *str)
> +{
> + if (!strncmp(str, "syslog", 6))
> + console_msg_format = MSG_FORMAT_SYSLOG;
It might make sense to accept also the "default" format.
> + return 1;
> +}
> +__setup("console_msg_format=", console_msg_format_setup);
I would use early_param() so that it takes effect as soon as possible.
Otherwise, it looks fine. The patch is nicely minimalistic.
Best Regards,
Petr
next prev parent reply other threads:[~2017-12-07 13:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 10:44 Sergey Senozhatsky
2017-12-07 13:48 ` Petr Mladek [this message]
2017-12-07 14:01 ` Sergey Senozhatsky
2017-12-07 15:45 ` Petr Mladek
2017-12-07 16:03 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171207134844.dkwo4b2tsfj3jxyu@pathway.suse.cz \
--to=pmladek@suse.com \
--cc=akpm@linux-foundation.org \
--cc=broonie@kernel.org \
--cc=fengguang.wu@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=sergey.senozhatsky.work@gmail.com \
--cc=sergey.senozhatsky@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®