[PATCH AUTOSEL for 3.18 52/59] pinctrl: adi2: Fix Kconfig build problem

[alexander.levin@verizon.com]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]

The build robot is complaining on Blackfin:

drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
   pointer to incomplete type 'struct gpio_port_t'
      writew(readw(&regs->port_fer) & ~BIT(offset),
                        ^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
      if (readl(&regs->invert_set) & pintbit)
                     ^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.

The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.

Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.

Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.

This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Huanhuan Feng <huanhuan.feng@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/blackfin/Kconfig       | 7 +++++--
 arch/blackfin/Kconfig.debug | 1 +
 drivers/pinctrl/Kconfig     | 3 ++-
 3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index af76634f8d98..934573cc1134 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -318,11 +318,14 @@ config BF53x
 
 config GPIO_ADI
 	def_bool y
+	depends on !PINCTRL
 	depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
 
-config PINCTRL
+config PINCTRL_BLACKFIN_ADI2
 	def_bool y
-	depends on BF54x || BF60x
+	depends on (BF54x || BF60x)
+	select PINCTRL
+	select PINCTRL_ADI2
 
 config MEM_MT48LC64M4A2FB_7E
 	bool
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index f3337ee03621..a93cf06a4d6f 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -17,6 +17,7 @@ config DEBUG_VERBOSE
 
 config DEBUG_MMRS
 	tristate "Generate Blackfin MMR tree"
+	depends on !PINCTRL
 	select DEBUG_FS
 	help
 	  Create a tree of Blackfin MMRs via the debugfs tree.  If
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index c6a66de6ed72..b916a0eb799f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -28,7 +28,8 @@ config DEBUG_PINCTRL
 
 config PINCTRL_ADI2
 	bool "ADI pin controller driver"
-	depends on BLACKFIN
+	depends on (BF54x || BF60x)
+	depends on !GPIO_ADI
 	select PINMUX
 	select IRQ_DOMAIN
 	help
-- 
2.11.0