mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>
Subject: [PATCH v2 03/13] irqchip: Add a driver for the Microsemi Ocelot controller
Date: Fri,  8 Dec 2017 16:46:08 +0100	[thread overview]
Message-ID: <20171208154618.20105-4-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20171208154618.20105-1-alexandre.belloni@free-electrons.com>

The Microsemi Ocelot SoC has a pretty simple IRQ controller in its ICPU
block. Add a driver for it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/irqchip/Kconfig           |   5 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-mscc-ocelot.c | 109 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 drivers/irqchip/irq-mscc-ocelot.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index c70476b34a53..9605a872da1c 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -286,6 +286,11 @@ config IRQ_MXS
 	select IRQ_DOMAIN
 	select STMP_DEVICE
 
+config MSCC_OCELOT_IRQ
+	bool
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
+
 config MVEBU_GICP
 	bool
 
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d2df34a54d38..dc549701782d 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
+obj-$(CONFIG_MSCC_OCELOT_IRQ)		+= irq-mscc-ocelot.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
 obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
diff --git a/drivers/irqchip/irq-mscc-ocelot.c b/drivers/irqchip/irq-mscc-ocelot.c
new file mode 100644
index 000000000000..c2cf46758a59
--- /dev/null
+++ b/drivers/irqchip/irq-mscc-ocelot.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi Ocelot IRQ controller driver
+ *
+ * License: Dual MIT/GPL
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/interrupt.h>
+
+#define ICPU_CFG_INTR_INTR_STICKY	0x10
+#define ICPU_CFG_INTR_INTR_ENA		0x18
+#define ICPU_CFG_INTR_INTR_ENA_CLR	0x1c
+#define ICPU_CFG_INTR_INTR_ENA_SET	0x20
+#define ICPU_CFG_INTR_DST_INTR_IDENT(x)	(0x38 + 0x4 * (x))
+#define ICPU_CFG_INTR_INTR_TRIGGER(x)	(0x5c + 0x4 * (x))
+
+#define OCELOT_NR_IRQ 24
+
+static void ocelot_irq_unmask(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct irq_chip_type *ct = irq_data_get_chip_type(data);
+	unsigned int mask = data->mask;
+	u32 val;
+
+	irq_gc_lock(gc);
+	val = irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(0)) |
+	      irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(1));
+	if ((val & mask) == 0)
+		irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_STICKY);
+
+	*ct->mask_cache &= ~mask;
+	irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_ENA_SET);
+	irq_gc_unlock(gc);
+}
+
+static void ocelot_irq_handler(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_domain *d = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, 0);
+	u32 reg = irq_reg_readl(gc, ICPU_CFG_INTR_DST_INTR_IDENT(0));
+
+	chained_irq_enter(chip, desc);
+
+	while (reg) {
+		u32 hwirq = __fls(reg);
+
+		generic_handle_irq(irq_find_mapping(d, hwirq));
+		reg &= ~(BIT(hwirq));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int __init ocelot_irq_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	int parent_irq, ret;
+
+	domain = irq_domain_add_linear(node, OCELOT_NR_IRQ,
+				       &irq_generic_chip_ops, NULL);
+	if (!domain) {
+		pr_err("%s: unable to add irq domain\n", node->name);
+		return -ENOMEM;
+	}
+
+	ret = irq_alloc_domain_generic_chips(domain, OCELOT_NR_IRQ, 1,
+					     "icpu", handle_level_irq,
+					     0, 0, 0);
+	if (ret) {
+		pr_err("%s: unable to alloc irq domain gc\n", node->name);
+		return ret;
+	}
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	gc->reg_base = of_iomap(node, 0);
+	if (!gc->reg_base) {
+		pr_err("%s: unable to map resource\n", node->name);
+		return -ENOMEM;
+	}
+
+	gc->chip_types[0].regs.ack = ICPU_CFG_INTR_INTR_STICKY;
+	gc->chip_types[0].regs.mask = ICPU_CFG_INTR_INTR_ENA_CLR;
+	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
+	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+	gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+
+	irq_reg_writel(gc, 0, ICPU_CFG_INTR_INTR_ENA); /* Mask all */
+	irq_reg_writel(gc, 0xffffffff, ICPU_CFG_INTR_INTR_STICKY); /* Ack pending */
+
+	parent_irq = irq_of_parse_and_map(node, 0);
+	if (!parent_irq)
+		return -EINVAL;
+
+	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
+					 domain);
+
+	return 0;
+}
+IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
-- 
2.15.1

  parent reply	other threads:[~2017-12-08 15:47 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-08 15:46 [PATCH v2 00/13] MIPS: add support for the Microsemi MIPS SoCs Alexandre Belloni
2017-12-08 15:46 ` [PATCH v2 01/13] dt-bindings: Add vendor prefix for Microsemi Corporation Alexandre Belloni
2017-12-08 15:46 ` [PATCH v2 02/13] dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller Alexandre Belloni
2017-12-08 15:46 ` Alexandre Belloni [this message]
2017-12-08 15:46 ` [PATCH v2 04/13] dt-bindings: pinctrl: Add bindings for Microsemi Ocelot Alexandre Belloni
2017-12-13  7:39   ` Linus Walleij
2017-12-08 15:46 ` [PATCH v2 05/13] pinctrl: Add Microsemi Ocelot SoC driver Alexandre Belloni
2017-12-13  8:15   ` Linus Walleij
2017-12-13  9:23     ` Philippe Ombredanne
2017-12-14 23:53       ` Linus Walleij
2017-12-15  7:59         ` Philippe Ombredanne
2017-12-18 16:09           ` Alexandre Belloni
2018-01-05 23:46     ` Alexandre Belloni
2018-01-06  0:09     ` [PATCH v3] " Alexandre Belloni
2018-01-09 13:56       ` Linus Walleij
2018-01-09 14:07         ` Alexandre Belloni
2017-12-08 15:46 ` [PATCH v2 06/13] dt-bindings: mips: Add bindings for Microsemi SoCs Alexandre Belloni
2017-12-13  0:44   ` Rob Herring
2017-12-08 15:46 ` [PATCH v2 07/13] dt-bindings: power: reset: Document ocelot-reset binding Alexandre Belloni
2017-12-15 20:23   ` Rob Herring
2017-12-15 22:07     ` Alexandre Belloni
2017-12-08 15:46 ` [PATCH v2 08/13] power: reset: Add a driver for the Microsemi Ocelot reset Alexandre Belloni
2017-12-08 17:07   ` Sebastian Reichel
2017-12-08 17:15     ` Alexandre Belloni
2017-12-18 13:26   ` PrasannaKumar Muralidharan
2017-12-08 15:46 ` [PATCH v2 09/13] MIPS: mscc: Add initial support for Microsemi MIPS SoCs Alexandre Belloni
2017-12-18 13:23   ` PrasannaKumar Muralidharan
2017-12-19 14:57   ` PrasannaKumar Muralidharan
2017-12-19 20:09     ` Alexandre Belloni
2017-12-21 13:36       ` PrasannaKumar Muralidharan
2017-12-08 15:46 ` [PATCH v2 10/13] MIPS: mscc: add ocelot dtsi Alexandre Belloni
2017-12-18 13:22   ` PrasannaKumar Muralidharan
2017-12-08 15:46 ` [PATCH v2 11/13] MIPS: mscc: add ocelot PCB123 device tree Alexandre Belloni
2017-12-18 13:29   ` PrasannaKumar Muralidharan
2017-12-08 15:46 ` [PATCH v2 12/13] MIPS: defconfigs: add a defconfig for Microsemi SoCs Alexandre Belloni
2017-12-08 15:46 ` [PATCH v2 13/13] MAINTAINERS: Add entry for Microsemi MIPS SoCs Alexandre Belloni
2017-12-17 16:59 ` [PATCH v2 00/13] MIPS: add support for the " PrasannaKumar Muralidharan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171208154618.20105-4-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®