From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752685AbdLHSfe (ORCPT ); Fri, 8 Dec 2017 13:35:34 -0500 Received: from usa-sjc-mx-foss1.foss.arm.com ([217.140.101.70]:42112 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751275AbdLHSf3 (ORCPT ); Fri, 8 Dec 2017 13:35:29 -0500 Date: Fri, 8 Dec 2017 18:35:23 +0000 From: Lorenzo Pieralisi To: Vignesh R Cc: Bjorn Helgaas , Rob Herring , Tony Lindgren , Chris Welch , Kishon Vijay Abraham I , linux-omap@vger.kernel.org, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 4/4] PCI: dwc: pci-dra7xx: Fix legacy IRQ handling Message-ID: <20171208183523.GB1885@e107981-ln.cambridge.arm.com> References: <20171201061311.16691-1-vigneshr@ti.com> <20171201061311.16691-5-vigneshr@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20171201061311.16691-5-vigneshr@ti.com> User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Dec 01, 2017 at 11:43:11AM +0530, Vignesh R wrote: > Legacy INTD IRQ handling is broken on dra7xx due to fact that driver > uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size > 4 which is numbered 0-3. Therefore when INTD IRQ line is used with > pci-dra7xx driver following warning is seen: > > WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4 > error: hwirq 0x4 is too large for dummy > > Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4 > range into the 0-3 as done in other PCIe drivers. > > Also, iterate over all the INTx bits and call their respective IRQ > handlers before clearing the status register. It seems to me that you are fixing two bugs with one patch and therefore I would ask you to split it in two or explain to me why we should consider lumping them together. Thanks, Lorenzo > Suggested-by: Bjorn Helgaas > Reported-by: Chris Welch > Signed-off-by: Vignesh R > --- > drivers/pci/dwc/pci-dra7xx.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c > index 53f721d1cc40..59e8de34cec6 100644 > --- a/drivers/pci/dwc/pci-dra7xx.c > +++ b/drivers/pci/dwc/pci-dra7xx.c > @@ -226,6 +226,7 @@ static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq, > > static const struct irq_domain_ops intx_domain_ops = { > .map = dra7xx_pcie_intx_map, > + .xlate = pci_irqd_intx_xlate, > }; > > static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp) > @@ -256,7 +257,8 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg) > struct dra7xx_pcie *dra7xx = arg; > struct dw_pcie *pci = dra7xx->pci; > struct pcie_port *pp = &pci->pp; > - u32 reg; > + unsigned long reg; > + u32 virq, bit; > > reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI); > > @@ -268,8 +270,11 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg) > case INTB: > case INTC: > case INTD: > - generic_handle_irq(irq_find_mapping(dra7xx->irq_domain, > - ffs(reg))); > + for_each_set_bit(bit, ®, PCI_NUM_INTX) { > + virq = irq_find_mapping(dra7xx->irq_domain, bit); > + if (virq) > + generic_handle_irq(virq); > + } > break; > } > > -- > 2.15.0 >