From: alexander.levin@verizon.com
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Christian Lamparter <chunkeey@gmail.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
alexander.levin@verizon.com
Subject: [PATCH AUTOSEL for 4.14 08/60] crypto: crypto4xx - increase context and scatter ring buffer elements
Date: Wed, 13 Dec 2017 01:55:12 +0000 [thread overview]
Message-ID: <20171213015455.6455-8-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171213015455.6455-1-alexander.levin@verizon.com>
From: Christian Lamparter <chunkeey@gmail.com>
[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ]
If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.
On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)
/dev/mapper/swap_crypt:
Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec
The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:
/dev/mapper/swap_crypt:
Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec
Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
drivers/crypto/amcc/crypto4xx_core.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/crypto/amcc/crypto4xx_core.h b/drivers/crypto/amcc/crypto4xx_core.h
index ecfdcfe3698d..4f41d6da5acc 100644
--- a/drivers/crypto/amcc/crypto4xx_core.h
+++ b/drivers/crypto/amcc/crypto4xx_core.h
@@ -34,12 +34,12 @@
#define PPC405EX_CE_RESET 0x00000008
#define CRYPTO4XX_CRYPTO_PRIORITY 300
-#define PPC4XX_LAST_PD 63
-#define PPC4XX_NUM_PD 64
-#define PPC4XX_LAST_GD 1023
+#define PPC4XX_NUM_PD 256
+#define PPC4XX_LAST_PD (PPC4XX_NUM_PD - 1)
#define PPC4XX_NUM_GD 1024
-#define PPC4XX_LAST_SD 63
-#define PPC4XX_NUM_SD 64
+#define PPC4XX_LAST_GD (PPC4XX_NUM_GD - 1)
+#define PPC4XX_NUM_SD 256
+#define PPC4XX_LAST_SD (PPC4XX_NUM_SD - 1)
#define PPC4XX_SD_BUFFER_SIZE 2048
#define PD_ENTRY_INUSE 1
--
2.11.0
next prev parent reply other threads:[~2017-12-13 3:04 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 1:55 [PATCH AUTOSEL for 4.14 01/60] backlight: pwm_bl: Fix overflow condition alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 03/60] clk: sunxi-ng: nm: Check if requested rate is supported by fractional clock alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 02/60] drm: Add retries for lspcon mode detection alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 05/60] crypto: talitos - fix ctr-aes-talitos alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 04/60] clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-divider alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 06/60] crypto: talitos - fix AEAD test failures alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 07/60] crypto: talitos - fix memory corruption on SEC2 alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 10/60] rtc: pl031: make interrupt optional alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 11/60] kvm, mm: account kvm related kmem slabs to kmemcg alexander.levin
2017-12-13 1:55 ` alexander.levin [this message]
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 09/60] crypto: lrw - Fix an error handling path in 'create()' alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 13/60] PCI: Avoid bus reset if bridge itself is broken alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 14/60] scsi: cxgb4i: fix Tx skb leak alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 12/60] net: phy: at803x: Change error to EINVAL for invalid MAC alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 15/60] scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 19/60] Bluetooth: avoid silent hci_bcm ACPI PM regression alexander.levin
2017-12-13 8:14 ` Johan Hovold
2017-12-13 13:37 ` alexander.levin
2017-12-13 14:05 ` Johan Hovold
2017-12-13 14:18 ` alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 16/60] PCI: Create SR-IOV virtfn/physfn links before attaching driver alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 18/60] igb: check memory allocation failure alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 17/60] PM / OPP: Move error message to debug level alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 22/60] iio: st_sensors: add register mask for status register alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 21/60] i40e: use the safe hash table iterator when deleting mac filters alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 20/60] kbuild: re-order the code to not parse unnecessary variables alexander.levin
2017-12-20 17:13 ` Greg KH
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 24/60] IB/rxe: check for allocation failure on elem alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 23/60] ixgbe: fix use of uninitialized padding alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 25/60] block,bfq: Disable writeback throttling alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 26/60] md: always set THREAD_WAKEUP and wake up wqueue if thread existed alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 27/60] ip_gre: check packet length and mtu correctly in erspan tx alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 29/60] leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 30/60] Bluetooth: hci_uart_set_flow_control: Fix NULL deref when using serdev alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 28/60] ipv6: grab rt->rt6i_ref before allocating pcpu rt alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 33/60] PCI/AER: Report non-fatal errors only to the affected endpoint alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 34/60] tracing: Exclude 'generic fields' from histograms alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 31/60] Bluetooth: hci_bcm: Fix setting of irq trigger type alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 32/60] i40e/i40evf: spread CPU affinity hints across online CPUs only alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 37/60] ASoC: img-parallel-out: Add pm_runtime_get/put to set_fmt callback alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 36/60] ASoC: codecs: msm8916-wcd-analog: fix micbias level alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 38/60] powerpc/xmon: Avoid tripping SMP hardlockup watchdog alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 35/60] percpu: don't forget to free the temporary struct pcpu_alloc_info alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 42/60] fm10k: fix mis-ordered parameters in declaration for .ndo_set_vf_bw alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 39/60] powerpc/watchdog: Do not trigger SMP crash from touch_nmi_watchdog alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 40/60] sctp: silence warns on sctp_stream_init allocations alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 41/60] ASoC: codecs: msm8916-wcd-analog: fix module autoload alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 45/60] scsi: lpfc: Fix warning messages when NVME_TARGET_FC not defined alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 44/60] scsi: lpfc: PLOGI failures during NPIV testing alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 46/60] i40e: fix client notify of VF reset alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 43/60] scsi: lpfc: Fix secure firmware updates alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 49/60] fm10k: ensure we process SM mbx when processing VF mbx alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 48/60] ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 50/60] ibmvnic: Set state UP alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 47/60] vfio/pci: Virtualize Maximum Payload Size alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 52/60] RDMA/hns: Avoid NULL pointer exception alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 54/60] clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 53/60] staging: greybus: light: Release memory obtained by kasprintf alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 51/60] net: ipv6: send NS for DAD when link operationally up alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 58/60] drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 56/60] rtc: set the alarm to the next expiring timer alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 57/60] cpuidle: fix broadcast control when broadcast can not be entered alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 55/60] tcp: fix under-evaluated ssthresh in TCP Vegas alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 59/60] IB/opa_vnic: Properly clear Mac Table Digest alexander.levin
2017-12-13 1:55 ` [PATCH AUTOSEL for 4.14 60/60] IB/opa_vnic: Properly return the total MACs in UC MAC list alexander.levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171213015455.6455-8-alexander.levin@verizon.com \
--to=alexander.levin@verizon.com \
--cc=chunkeey@gmail.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®