From: alexander.levin@verizon.com
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>,
Michael Ellerman <mpe@ellerman.id.au>,
alexander.levin@verizon.com
Subject: [PATCH AUTOSEL for 4.4 53/59] powerpc/xmon: Avoid tripping SMP hardlockup watchdog
Date: Wed, 13 Dec 2017 01:58:39 +0000 [thread overview]
Message-ID: <20171213015817.6950-53-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171213015817.6950-1-alexander.levin@verizon.com>
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit 064996d62a33ffe10264b5af5dca92d54f60f806 ]
The SMP hardlockup watchdog cross-checks other CPUs for lockups, which
causes xmon headaches because it's assuming interrupts hard disabled
means no watchdog troubles. Try to improve that by calling
touch_nmi_watchdog() in obvious places where secondaries are spinning.
Also annotate these spin loops with spin_begin/end calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
arch/powerpc/xmon/xmon.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 786bf01691c9..d067262be7e1 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -474,14 +474,19 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
waiting:
secondary = 1;
+ spin_begin();
while (secondary && !xmon_gate) {
if (in_xmon == 0) {
- if (fromipi)
+ if (fromipi) {
+ spin_end();
goto leave;
+ }
secondary = test_and_set_bit(0, &in_xmon);
}
- barrier();
+ spin_cpu_relax();
+ touch_nmi_watchdog();
}
+ spin_end();
if (!secondary && !xmon_gate) {
/* we are the first cpu to come in */
@@ -508,21 +513,25 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
mb();
xmon_gate = 1;
barrier();
+ touch_nmi_watchdog();
}
cmdloop:
while (in_xmon) {
if (secondary) {
+ spin_begin();
if (cpu == xmon_owner) {
if (!test_and_set_bit(0, &xmon_taken)) {
secondary = 0;
+ spin_end();
continue;
}
/* missed it */
while (cpu == xmon_owner)
- barrier();
+ spin_cpu_relax();
}
- barrier();
+ spin_cpu_relax();
+ touch_nmi_watchdog();
} else {
cmd = cmds(regs);
if (cmd != 0) {
--
2.11.0
next prev parent reply other threads:[~2017-12-13 2:17 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 1:58 [PATCH AUTOSEL for 4.4 01/59] ALSA: hda - add support for docking station for HP 820 G2 alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 02/59] ALSA: hda - add support for docking station for HP 840 G3 alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 04/59] arm: kprobes: Align stack to 8-bytes in test code alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 05/59] cpuidle: Validate cpu_dev in cpuidle_add_sysfs() alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 06/59] r8152: fix the list rx_done may be used without initialization alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 03/59] arm: kprobes: Fix the return address of multiple kretprobes alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 09/59] bna: integer overflow bug in debugfs alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 07/59] crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 08/59] sch_dsmark: fix invalid skb_cow() usage alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 10/59] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4 alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 13/59] netfilter: nfnl_cthelper: fix runtime expectation policy updates alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 14/59] netfilter: nfnl_cthelper: Fix memory leak alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 11/59] usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 12/59] usb: gadget: udc: remove pointer dereference after free alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 16/59] pinctrl: st: add irq_request/release_resources callbacks alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 17/59] scsi: lpfc: Fix PT2PT PRLI reject alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 15/59] inet: frag: release spinlock before calling icmp_send() alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 19/59] KVM: VMX: Fix enable VPID conditions alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 20/59] ARM: dts: ti: fix PCI bus dtc warnings alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 18/59] KVM: x86: correct async page present tracepoint alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 23/59] HID: xinmo: fix for out of range for THT 2P arcade controller alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 21/59] hwmon: (asus_atk0110) fix uninitialized data access alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 24/59] r8152: prevent the driver from transmitting packets with carrier off alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 22/59] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 27/59] net: Do not allow negative values for busy_read and busy_poll sysctl interfaces alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 26/59] bna: avoid writing uninitialized data into hw registers alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 28/59] i40e: Do not enable NAPI on q_vectors that have no rings alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 25/59] s390/qeth: no ETH header for outbound AF_IUCV alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 30/59] irda: vlsi_ir: fix check for DMA mapping errors alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 31/59] netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 29/59] RDMA/iser: Fix possible mr leak on device removal event alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 33/59] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 34/59] KVM: pci-assign: do not map smm memory slot pages in vt-d page tables alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 32/59] netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 35/59] isdn: kcapi: avoid uninitialized data alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 38/59] ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 37/59] netfilter: nfnetlink_queue: fix secctx memory leak alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 39/59] cpuidle: powernv: Pass correct drv->cpumask for registration alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 36/59] xhci: plat: Register shutdown for xhci_plat alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 40/59] bnxt_en: Fix NULL pointer dereference in reopen failure path alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 43/59] rtc: pl031: make interrupt optional alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 42/59] crypto: crypto4xx - increase context and scatter ring buffer elements alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 41/59] backlight: pwm_bl: Fix overflow condition alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 44/59] net: phy: at803x: Change error to EINVAL for invalid MAC alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 47/59] scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 45/59] PCI: Avoid bus reset if bridge itself is broken alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 46/59] scsi: cxgb4i: fix Tx skb leak alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 51/59] PCI/AER: Report non-fatal errors only to the affected endpoint alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 50/59] ixgbe: fix use of uninitialized padding alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 48/59] PCI: Create SR-IOV virtfn/physfn links before attaching driver alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 49/59] igb: check memory allocation failure alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 55/59] scsi: lpfc: PLOGI failures during NPIV testing alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 54/59] scsi: lpfc: Fix secure firmware updates alexander.levin
2017-12-13 1:58 ` alexander.levin [this message]
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 52/59] percpu: don't forget to free the temporary struct pcpu_alloc_info alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 58/59] rtc: set the alarm to the next expiring timer alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 59/59] cpuidle: fix broadcast control when broadcast can not be entered alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 57/59] tcp: fix under-evaluated ssthresh in TCP Vegas alexander.levin
2017-12-13 1:58 ` [PATCH AUTOSEL for 4.4 56/59] fm10k: ensure we process SM mbx when processing VF mbx alexander.levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171213015817.6950-53-alexander.levin@verizon.com \
--to=alexander.levin@verizon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®