From: Arnd Bergmann <arnd@arndb.de>
To: Brian Norris <computersforpeace@gmail.com>,
Gregory Fong <gregory.0xf0@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>, Alamy Liu <alamyliu@broadcom.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] [v2] ARM: B15: fix unused label warnings
Date: Mon, 18 Dec 2017 17:52:58 +0100 [thread overview]
Message-ID: <20171218165307.1472231-1-arnd@arndb.de> (raw)
The new conditionally compiled code leaves some labels and one
variable unreferenced when CONFIG_HOTPLUG_CPU and CONFIG_PM_SLEEP
are disabled:
arch/arm/mm/cache-b15-rac.c: In function 'b15_rac_init':
arch/arm/mm/cache-b15-rac.c:353:1: error: label 'out_unmap' defined but not used [-Werror=unused-label]
out_unmap:
^~~~~~~~~
arch/arm/mm/cache-b15-rac.c:351:1: error: label 'out_cpu_dead' defined but not used [-Werror=unused-label]
out_cpu_dead:
^~~~~~~~~~~~
At top level:
arch/arm/mm/cache-b15-rac.c:53:12: error: 'rac_config0_reg' defined but not used [-Werror=unused-variable]
This replaces the existing #ifdef conditionals with IS_ENABLED()
checks that let the compiler figure out for itself which code to
drop.
Fixes: 55de88778f4b ("ARM: 8726/1: B15: Add CPU hotplug awareness")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: use fewer #ifdef rather than adding more
---
arch/arm/mm/cache-b15-rac.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c
index f76988790011..d9586ba2e63c 100644
--- a/arch/arm/mm/cache-b15-rac.c
+++ b/arch/arm/mm/cache-b15-rac.c
@@ -50,6 +50,7 @@ extern void v7_flush_kern_cache_all(void);
static void __iomem *b15_rac_base;
static DEFINE_SPINLOCK(rac_lock);
+
static u32 rac_config0_reg;
/* Initialization flag to avoid checking for b15_rac_base, and to prevent
@@ -175,7 +176,6 @@ static struct notifier_block b15_rac_reboot_nb = {
.notifier_call = b15_rac_reboot_notifier,
};
-#ifdef CONFIG_HOTPLUG_CPU
/* The CPU hotplug case is the most interesting one, we basically need to make
* sure that the RAC is disabled for the entire system prior to having a CPU
* die, in particular prior to this dying CPU having exited the coherency
@@ -253,9 +253,7 @@ static int b15_rac_dead_cpu(unsigned int cpu)
return 0;
}
-#endif /* CONFIG_HOTPLUG_CPU */
-#ifdef CONFIG_PM_SLEEP
static int b15_rac_suspend(void)
{
/* Suspend the read-ahead cache oeprations, forcing our cache
@@ -286,7 +284,6 @@ static struct syscore_ops b15_rac_syscore_ops = {
.suspend = b15_rac_suspend,
.resume = b15_rac_resume,
};
-#endif
static int __init b15_rac_init(void)
{
@@ -315,23 +312,22 @@ static int __init b15_rac_init(void)
goto out;
}
-#ifdef CONFIG_HOTPLUG_CPU
- ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DEAD,
+ if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
+ ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DEAD,
"arm/cache-b15-rac:dead",
NULL, b15_rac_dead_cpu);
- if (ret)
- goto out_unmap;
+ if (ret)
+ goto out_unmap;
- ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
+ ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
"arm/cache-b15-rac:dying",
NULL, b15_rac_dying_cpu);
- if (ret)
- goto out_cpu_dead;
-#endif
+ if (ret)
+ goto out_cpu_dead;
+ }
-#ifdef CONFIG_PM_SLEEP
- register_syscore_ops(&b15_rac_syscore_ops);
-#endif
+ if (IS_ENABLED(CONFIG_PM_SLEEP))
+ register_syscore_ops(&b15_rac_syscore_ops);
spin_lock(&rac_lock);
reg = __raw_readl(b15_rac_base + RAC_CONFIG0_REG);
--
2.9.0
next reply other threads:[~2017-12-18 16:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 16:52 Arnd Bergmann [this message]
2017-12-19 1:21 ` Florian Fainelli
2018-01-02 17:31 ` Florian Fainelli
2018-01-02 17:33 ` Russell King - ARM Linux
2018-01-08 13:24 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171218165307.1472231-1-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=alamyliu@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=gregory.0xf0@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome