From: vcaputo@pengaru.com
To: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [BUG] 4.15-rc4 'do_IRQ: 0.33 No irq handler for vector'
Date: Sun, 31 Dec 2017 00:48:04 -0800 [thread overview]
Message-ID: <20171231084804.qto6tx2owsbpgyk7@shells.gnugeneration.com> (raw)
In-Reply-To: <20171230204723.33d5b870@alans-desktop>
On Sat, Dec 30, 2017 at 08:47:23PM +0000, Alan Cox wrote:
> On Mon, 18 Dec 2017 20:39:17 -0800
> vcaputo@pengaru.com wrote:
>
> > Hello everyone,
> >
> > While investigating `journalctl -k` for anything associated with broken
> > audio, this was found:
> >
> > Dec 18 16:09:28 iridesce kernel: do_IRQ: 0.33 No irq handler for vector
>
> That first one is a bit weird. But it looks like your machine got very
> upset.
>
> > Dec 18 16:10:21 iridesce kernel: ata1.00: exception Emask 0x0 SAct 0xfe0 SErr 0x0 action 0x6 frozen
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/08:28:30:92:79/00:00:1c:00:00/40 tag 5 ncq dma 4096 out
> > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/08:30:10:20:68/00:00:00:00:00/40 tag 6 ncq dma 4096 out
> > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/08:38:30:5d:ec/00:00:1c:00:00/40 tag 7 ncq dma 4096 out
> > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/48:40:c0:75:64/00:00:00:00:00/40 tag 8 ncq dma 36864 out
> > res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/08:48:20:20:ec/00:00:1c:00:00/40 tag 9 ncq dma 4096 out
> > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/08:50:80:20:78/00:00:1c:00:00/40 tag 10 ncq dma 4096 out
> > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
> > Dec 18 16:10:21 iridesce kernel: ata1.00: failed command: WRITE FPDMA QUEUED
> > Dec 18 16:10:21 iridesce kernel: ata1.00: cmd 61/08:58:90:3e:78/00:00:1c:00:00/40 tag 11 ncq dma 4096 out
> > res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: status: { DRDY }
>
> Your hard disk stopped responding
>
> > Dec 18 16:10:21 iridesce kernel: ata1: hard resetting link
> > Dec 18 16:10:21 iridesce kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > Dec 18 16:10:21 iridesce kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > Dec 18 16:10:21 iridesce kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > Dec 18 16:10:21 iridesce kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > Dec 18 16:10:21 iridesce kernel: ata1.00: supports DRM functions and may not be fully accessible
> > Dec 18 16:10:21 iridesce kernel: ata1.00: NCQ Send/Recv Log not supported
> > Dec 18 16:10:21 iridesce kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > Dec 18 16:10:21 iridesce kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > Dec 18 16:10:21 iridesce kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > Dec 18 16:10:21 iridesce kernel: ata1.00: supports DRM functions and may not be fully accessible
> > Dec 18 16:10:21 iridesce kernel: ata1.00: NCQ Send/Recv Log not supported
> > Dec 18 16:10:21 iridesce kernel: ata1.00: configured for UDMA/133
>
> And while it kind of came back
>
> > Dec 18 16:10:21 iridesce kernel: ata1.00: device reported invalid CHS sector 0
> > Dec 18 16:10:21 iridesce kernel: ata1.00: device reported invalid CHS sector 0
> > Dec 18 16:10:21 iridesce kernel: ata1.00: device reported invalid CHS sector 0
> > Dec 18 16:10:21 iridesce kernel: ata1.00: device reported invalid CHS sector 0
> > Dec 18 16:10:21 iridesce kernel: ata1.00: device reported invalid CHS sector 0
> > Dec 18 16:10:21 iridesce kernel: ata1: EH complete
>
> It wasn't talking sense.
>
>
> Do you see the same whenever the audio fails ?
Hi Alan,
This seems to be related to and already fixed by:
https://lkml.org/lkml/2017/12/28/665
Thanks,
Vito Caputo
prev parent reply other threads:[~2017-12-31 8:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 4:39 vcaputo
2017-12-30 20:47 ` Alan Cox
2017-12-31 8:48 ` vcaputo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171231084804.qto6tx2owsbpgyk7@shells.gnugeneration.com \
--to=vcaputo@pengaru.com \
--cc=gnomes@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®