mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: Herbert Xu <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>, Richard Biener <rguenther@suse.de>,
	Jakub Jelinek <jakub@gcc.gnu.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] [v2] crypto: aes-generic - build with -Os on gcc-7+
Date: Wed,  3 Jan 2018 23:39:27 +0100	[thread overview]
Message-ID: <20180103223940.3715372-1-arnd@arndb.de> (raw)

While testing other changes, I discovered that gcc-7.2.1 produces badly
optimized code for aes_encrypt/aes_decrypt. This is especially true when
CONFIG_UBSAN_SANITIZE_ALL is enabled, where it leads to extremely
large stack usage that in turn might cause kernel stack overflows:

crypto/aes_generic.c: In function 'aes_encrypt':
crypto/aes_generic.c:1371:1: warning: the frame size of 4880 bytes is larger than 2048 bytes [-Wframe-larger-than=]
crypto/aes_generic.c: In function 'aes_decrypt':
crypto/aes_generic.c:1441:1: warning: the frame size of 4864 bytes is larger than 2048 bytes [-Wframe-larger-than=]

I verified that this problem exists on all architectures that are
supported by gcc-7.2, though arm64 in particular is less affected than
the others. I also found that gcc-7.1 and gcc-8 do not show the extreme
stack usage but still produce worse code than earlier versions for this
file, apparently because of optimization passes that generally provide
a substantial improvement in object code quality but understandably fail
to find any shortcuts in the AES algorithm.

Possible workarounds include

a) disabling -ftree-pre and -ftree-sra optimizations, this was an earlier
   patch I tried, which reliably fixed the stack usage, but caused a
   serious performance regression in some versions, as later testing
   found.

b) disabling UBSAN on this file or all ciphers, as suggested by Ard
   Biesheuvel. This would lead to massively better crypto performance in
   UBSAN-enabled kernels and avoid the stack usage, but there is a concern
   over whether we should exclude arbitrary files from UBSAN at all.

c) Forcing the optimization level in a different way. Similar to a),
   but rather than deselecting specific optimization stages,
   this now uses "gcc -Os" for this file, regardless of the
   CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE/SIZE option. This is a reliable
   workaround for the stack consumption on all architecture, and I've
   retested the performance results now on x86, cycles/byte (lower is
   better) for cbc(aes-generic) with 256 bit keys:

			-O2     -Os
	gcc-6.3.1	14.9	15.1
	gcc-7.0.1	14.7	15.3
	gcc-7.1.1	15.3	14.7
	gcc-7.2.1	16.8	15.9
	gcc-8.0.0	15.5	15.6

This implements the option c) by enabling forcing -Os on all compiler
versions starting with gcc-7.1. As a workaround for PR83356, it would
only be needed for gcc-7.2+ with UBSAN enabled, but since it also shows
better performance on gcc-7.1 without UBSAN, it seems appropriate to
use the faster version here as well.

Side note: during testing, I also played with the AES code in libressl,
which had a similar performance regression from gcc-6 to gcc-7.2,
but was three times slower overall. It might be interesting to
investigate that further and possibly port the Linux implementation
into that.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83651
Cc: Richard Biener <rguenther@suse.de>
Cc: Jakub Jelinek <jakub@gcc.gnu.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 crypto/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/crypto/Makefile b/crypto/Makefile
index d674884b2d51..daa69360e054 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_CRYPTO_TWOFISH_COMMON) += twofish_common.o
 obj-$(CONFIG_CRYPTO_SERPENT) += serpent_generic.o
 CFLAGS_serpent_generic.o := $(call cc-option,-fsched-pressure)  # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
 obj-$(CONFIG_CRYPTO_AES) += aes_generic.o
+CFLAGS_aes_generic.o := $(call cc-ifversion, -ge, 0701, -Os) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
 obj-$(CONFIG_CRYPTO_AES_TI) += aes_ti.o
 obj-$(CONFIG_CRYPTO_CAMELLIA) += camellia_generic.o
 obj-$(CONFIG_CRYPTO_CAST_COMMON) += cast_common.o
-- 
2.9.0

             reply	other threads:[~2018-01-03 22:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-03 22:39 Arnd Bergmann [this message]
2018-01-04  9:08 ` Ard Biesheuvel
2018-01-12 12:24 ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180103223940.3715372-1-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=ard.biesheuvel@linaro.org \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=jakub@gcc.gnu.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rguenther@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®