mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Loic Pallardy <loic.pallardy@st.com>
Subject: [PATCH v2 2/8] remoteproc: Cache resource table size
Date: Fri,  5 Jan 2018 15:57:59 -0800	[thread overview]
Message-ID: <20180105235805.9948-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20180105235805.9948-1-bjorn.andersson@linaro.org>

We don't re-read the resource table during a recovery, so it is possible
in the recovery path that the resource table has a different size than
cached_table. Store the original size of cached_table to avoid these
getting out of sync.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- None

 drivers/remoteproc/remoteproc_core.c | 20 +++++++-------------
 include/linux/remoteproc.h           |  2 ++
 2 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 758fad3131a3..208ccf709cad 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -732,7 +732,7 @@ static rproc_handle_resource_t rproc_loading_handlers[RSC_LAST] = {
 };
 
 /* handle firmware resource entries before booting the remote processor */
-static int rproc_handle_resources(struct rproc *rproc, int len,
+static int rproc_handle_resources(struct rproc *rproc,
 				  rproc_handle_resource_t handlers[RSC_LAST])
 {
 	struct device *dev = &rproc->dev;
@@ -742,7 +742,7 @@ static int rproc_handle_resources(struct rproc *rproc, int len,
 	for (i = 0; i < rproc->table_ptr->num; i++) {
 		int offset = rproc->table_ptr->offset[i];
 		struct fw_rsc_hdr *hdr = (void *)rproc->table_ptr + offset;
-		int avail = len - offset - sizeof(*hdr);
+		int avail = rproc->table_sz - offset - sizeof(*hdr);
 		void *rsc = (void *)hdr + sizeof(*hdr);
 
 		/* make sure table isn't truncated */
@@ -849,16 +849,9 @@ static void rproc_resource_cleanup(struct rproc *rproc)
 
 static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 {
-	struct resource_table *table, *loaded_table;
+	struct resource_table *loaded_table;
 	struct device *dev = &rproc->dev;
-	int ret, tablesz;
-
-	/* look for the resource table */
-	table = rproc_find_rsc_table(rproc, fw, &tablesz);
-	if (!table) {
-		dev_err(dev, "Resource table look up failed\n");
-		return -EINVAL;
-	}
+	int ret;
 
 	/* load the ELF segments to memory */
 	ret = rproc_load_segments(rproc, fw);
@@ -877,7 +870,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	 */
 	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
 	if (loaded_table) {
-		memcpy(loaded_table, rproc->cached_table, tablesz);
+		memcpy(loaded_table, rproc->cached_table, rproc->table_sz);
 		rproc->table_ptr = loaded_table;
 	}
 
@@ -951,12 +944,13 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up;
 
 	rproc->table_ptr = rproc->cached_table;
+	rproc->table_sz = tablesz;
 
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
 
 	/* handle fw resources which are required to boot rproc */
-	ret = rproc_handle_resources(rproc, tablesz, rproc_loading_handlers);
+	ret = rproc_handle_resources(rproc, rproc_loading_handlers);
 	if (ret) {
 		dev_err(dev, "Failed to process resources: %d\n", ret);
 		goto clean_up_resources;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 6f1d8e025c81..6fdc62e29d6f 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -410,6 +410,7 @@ enum rproc_crash_type {
  * @max_notifyid: largest allocated notify id.
  * @table_ptr: pointer to the resource table in effect
  * @cached_table: copy of the resource table
+ * @table_sz: size of @cached_table
  * @has_iommu: flag to indicate if remote processor is behind an MMU
  */
 struct rproc {
@@ -440,6 +441,7 @@ struct rproc {
 	int max_notifyid;
 	struct resource_table *table_ptr;
 	struct resource_table *cached_table;
+	size_t table_sz;
 	bool has_iommu;
 	bool auto_boot;
 };
-- 
2.15.0

  parent reply	other threads:[~2018-01-05 23:58 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-05 23:57 [PATCH v2 0/8] Remoteproc cleanups Bjorn Andersson
2018-01-05 23:57 ` [PATCH v2 1/8] remoteproc: Remove depricated crash completion Bjorn Andersson
2018-01-05 23:57 ` Bjorn Andersson [this message]
2018-01-05 23:58 ` [PATCH v2 3/8] remoteproc: Clone rproc_ops in rproc_alloc() Bjorn Andersson
2018-01-05 23:58 ` [PATCH v2 4/8] remoteproc: Merge rproc_ops and rproc_fw_ops Bjorn Andersson
2018-01-08 21:03   ` Loic PALLARDY
2018-01-05 23:58 ` [PATCH v2 5/8] remoteproc: Don't handle empty resource table Bjorn Andersson
2018-01-05 23:58 ` [PATCH v2 6/8] remoteproc: Move resource table load logic to find Bjorn Andersson
2018-01-05 23:58 ` [PATCH v2 7/8] remoteproc: Drop dangling find_rsc_table dummies Bjorn Andersson
2018-01-05 23:58 ` [PATCH v2 8/8] remoteproc: Reset table_ptr on stop Bjorn Andersson
2018-01-15 10:35 ` [PATCH v2 0/8] Remoteproc cleanups Loic PALLARDY
2018-01-15 17:30   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180105235805.9948-3-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=loic.pallardy@st.com \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®