From: Derek Basehore <dbasehore@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org, rafael.j.wysocki@intel.com,
tglx@linutronix.de, briannorris@chromium.org,
marc.zyngier@arm.com, Derek Basehore <dbasehore@chromium.org>
Subject: [PATCH 8/8] irqchip/gic-v3: add power down/up sequence
Date: Fri, 12 Jan 2018 13:24:22 -0800 [thread overview]
Message-ID: <20180112212422.148625-9-dbasehore@chromium.org> (raw)
In-Reply-To: <20180112212422.148625-1-dbasehore@chromium.org>
This adds the implementation specific power down/up sequence for the
GIC-500 and the GIC-600 (which are implementations of the GIC-v3
specification). This allows the LPI pending information to be properly
flushed on suspend if the GIC is disabled.
Change-Id: Iad2135b5f5a57f7dc0c15d05e4b9a06e1b4c24d1
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
drivers/irqchip/irq-gic-v3.c | 58 ++++++++++++++++++++++++++++++++++++++
include/linux/irqchip/arm-gic-v3.h | 9 ++++++
2 files changed, 67 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 95d37fb6f458..5286757dd413 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -816,6 +816,35 @@ static void gic_redist_save(int cpu)
ctx->nsacr = readl_relaxed(base + GICR_NSACR);
}
+static void gic_power_down(void)
+{
+ void __iomem *base = gic_data.dist_base;
+ u32 product_id = readl_relaxed(base + GICD_IIDR) >>
+ GICD_IIDR_PRODUCTID_SHIFT;
+
+ /*
+ * This power down sequence is implementation defined. It's the same for
+ * the GIC-500 and GIC-600.
+ */
+ if ((product_id & GIC500_IIDR_PRODUCTID) ||
+ (product_id & GIC600_IIDR_PRODUCTID)) {
+ u32 val;
+
+ /*
+ * There's only one instance of the GICR_WAKER register which
+ * each redistributor maps to. So this just needs to be set for
+ * the current CPU.
+ */
+ base = gic_data_rdist_rd_base();
+ val = readl_relaxed(base + GICR_WAKER);
+ writel_relaxed(val | GICR_WAKER_Sleep, base + GICR_WAKER);
+ while (!(readl_relaxed(base + GICR_WAKER) &
+ GICR_WAKER_Quiescent))
+ ;
+
+ }
+}
+
static void gic_dist_save(void)
{
struct gic_dist_ctx *ctx = gic_data.gicd_ctx;
@@ -871,6 +900,7 @@ static int gic_suspend(void)
for_each_possible_cpu(cpu)
gic_redist_save(cpu);
+ gic_power_down();
its_save_disable();
gic_dist_save();
@@ -901,6 +931,33 @@ static void gic_rdist_restore(int cpu)
gic_do_wait_for_rwp(base);
}
+static void gic_power_up(void)
+{
+ void __iomem *base = gic_data.dist_base;
+ u32 product_id = readl_relaxed(base + GICD_IIDR) >>
+ GICD_IIDR_PRODUCTID_SHIFT;
+
+ /*
+ * Same as the power down sequence, this part of the power up sequence
+ * is implementation defined.
+ */
+ if ((product_id & GIC500_IIDR_PRODUCTID) ||
+ (product_id & GIC600_IIDR_PRODUCTID)) {
+ u32 val;
+
+ /*
+ * Need to turn the GIC back on in-case suspend is cancelled.
+ * The GIC hardware reset state or the platform layer should
+ * handle this otherwise.
+ */
+ base = gic_data_rdist_rd_base();
+ val = readl_relaxed(base + GICR_WAKER);
+ writel_relaxed(val & ~GICR_WAKER_Sleep, base + GICR_WAKER);
+ while (readl_relaxed(base + GICR_WAKER) & GICR_WAKER_Quiescent)
+ ;
+ }
+}
+
static void gic_dist_restore(void)
{
struct gic_dist_ctx *ctx = gic_data.gicd_ctx;
@@ -937,6 +994,7 @@ static void gic_resume(void)
gic_dist_restore();
its_restore_enable();
+ gic_power_up();
for_each_possible_cpu(cpu)
gic_rdist_restore(cpu);
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index f086987e3cb4..22ced72be1c5 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -59,6 +59,10 @@
#define GICD_NSACR_SHIFT 4
#define GICD_IROUTER_SHIFT 0
+#define GICD_IIDR_PRODUCTID_SHIFT 24
+#define GIC500_IIDR_PRODUCTID 0x00
+#define GIC600_IIDR_PRODUCTID 0x02
+
/*
* Those registers are actually from GICv2, but the spec demands that they
* are implemented as RES0 if ARE is 1 (which we do in KVM's emulated GICv3).
@@ -122,8 +126,13 @@
#define GICR_TYPER_CPU_NUMBER(r) (((r) >> 8) & 0xffff)
+/*
+ * Sleep and Quiescent are implementation specific for the GIC-500 and GIC-600.
+ */
+#define GICR_WAKER_Sleep (1U << 0)
#define GICR_WAKER_ProcessorSleep (1U << 1)
#define GICR_WAKER_ChildrenAsleep (1U << 2)
+#define GICR_WAKER_Quiescent (1U << 31)
#define GIC_BASER_CACHE_nCnB 0ULL
#define GIC_BASER_CACHE_SameAsInner 0ULL
--
2.16.0.rc1.238.g530d649a79-goog
next prev parent reply other threads:[~2018-01-12 21:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 21:24 [PATCH 0/8] GICv3 Save and Restore Derek Basehore
2018-01-12 21:24 ` [PATCH 1/8] cpu_pm: add syscore_suspend error handling Derek Basehore
2018-01-12 22:07 ` Brian Norris
2018-01-12 21:24 ` [PATCH 2/8] lib/iomap_copy: add __ioread64_copy() Derek Basehore
2018-01-12 21:24 ` [PATCH 3/8] cpu_pm: Add SYSTEM_PM state Derek Basehore
2018-01-12 21:24 ` [PATCH 4/8] irqchip/gic-v3: add ability to save/restore GIC/ITS state Derek Basehore
2018-01-13 18:10 ` Marc Zyngier
2018-01-18 23:33 ` Brian Norris
2018-01-19 9:22 ` Marc Zyngier
2018-01-19 22:58 ` dbasehore .
2018-01-12 21:24 ` [PATCH 5/8] DT/arm,gic-v3: add save-suspend-state property Derek Basehore
2018-01-14 10:48 ` Marc Zyngier
2018-01-12 21:24 ` [PATCH 6/8] irqchip/gic-v3-its: add ability to resend MAPC on resume Derek Basehore
2018-01-14 10:56 ` Marc Zyngier
2018-01-25 23:07 ` dbasehore .
2018-01-12 21:24 ` [PATCH 7/8] DT/arm,gic-v3: add resend-mapc-on-resume property Derek Basehore
2018-01-12 21:24 ` Derek Basehore [this message]
2018-01-14 11:04 ` [PATCH 8/8] irqchip/gic-v3: add power down/up sequence Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112212422.148625-9-dbasehore@chromium.org \
--to=dbasehore@chromium.org \
--cc=briannorris@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=rafael.j.wysocki@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®