Re: [PATCH v3 1/2] dt-bindings: Document mti,mips-cpc binding

[James Hogan <james.hogan@mips.com>]

[-- Attachment #1: Type: text/plain, Size: 1312 bytes --]

On Wed, Dec 27, 2017 at 03:37:51PM +0100, Aleksandar Markovic wrote:
> From: Paul Burton <paul.burton@mips.com>
> 
> Document a binding for the MIPS Cluster Power Controller (CPC) that
> allows the device tree to specify where the CPC registers are located.
> 
> Signed-off-by: Paul Burton <paul.burton@mips.com>
> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
> ---
>  Documentation/devicetree/bindings/power/mti,mips-cpc.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
> new file mode 100644

Is it worth adding to the MIPS GENERIC PLATFORM entry of MAINTAINERS,
given that it directly benefits it?

Cheers
James

> index 0000000..c6b8251
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
> @@ -0,0 +1,8 @@
> +Binding for MIPS Cluster Power Controller (CPC).
> +
> +This binding allows a system to specify where the CPC registers are
> +located.
> +
> +Required properties:
> +compatible : Should be "mti,mips-cpc".
> +regs: Should describe the address & size of the CPC register region.
> -- 
> 2.7.4
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]