From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755910AbeASPzj (ORCPT ); Fri, 19 Jan 2018 10:55:39 -0500 Received: from mail-wr0-f195.google.com ([209.85.128.195]:45477 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754964AbeASPzd (ORCPT ); Fri, 19 Jan 2018 10:55:33 -0500 X-Google-Smtp-Source: ACJfBov5wyNXV+FWhV9V4E/tMStWDuYInhDW+UsADCCEs+JMsLGTAyQz+xS0q70BrOSmj44u9HqRvQ== From: Jerome Brunet To: Neil Armstrong Cc: Jerome Brunet , Kevin Hilman , Carlo Caione , Michael Turquette , Stephen Boyd , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 0/9] clk: meson: pll fixes Date: Fri, 19 Jan 2018 16:55:20 +0100 Message-Id: <20180119155529.11532-1-jbrunet@baylibre.com> X-Mailer: git-send-email 2.14.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This changeset is a collection of fixes and clean-up around the pll clock provider. This has been triggered by the discussion around the ethernet clock on the axg [0]. On the axg the rate reported by the fixed_pll is off by 8Mhz, which leads the internal mux of the ethernet driver to pick an mpll2 instead of the fdiv4. With this series applied, the fixed_pll of the axg now reports 1999998046 Hz, which is coherent with measurements (~2GHz) While debugging this, we uncovered quite a mess around the hdmi_pll of the gxbb and gxl family. This is also fixed by this series. Last, the parameters table provided to the read-only sys_plls have been removed, saving a bit of memory There is still work to be done on this clock provider. Someday, I hope to see the parameter tables go away completely. This pll is just a (quite complex) fractional divider, we sould be able to figure something out at runtime. Changes since v1: [1] * fix several typos in the comments * fix arm32 u64 math in patch 3 (Thanks a lot Martin!!) [0]: https://lkml.kernel.org/r/1516095424.2608.36.camel@baylibre.com [1]: https://lkml.kernel.org/r/20180118184532.6856-1-jbrunet@baylibre.com Jerome Brunet (9): clk: meson: check pll rate param table before using it clk: meson: remove useless pll rate params tables clk: meson: remove unnecessary rounding in the pll clock clk: meson: use the frac parameter width instead of a constant clk: meson: add od3 to the pll driver clk: meson: add the gxl hdmi pll clk: meson: fix rate calculation of plls with a fractional part clk: meson: gxbb: add the fractional part of the fixed_pll clk: meson: axg: add the fractional part of the fixed_pll drivers/clk/meson/axg.c | 99 ++------------------------ drivers/clk/meson/clk-pll.c | 41 ++++++++--- drivers/clk/meson/clkc.h | 2 + drivers/clk/meson/gxbb.c | 166 +++++++++++++++++++------------------------- drivers/clk/meson/gxbb.h | 3 +- 5 files changed, 111 insertions(+), 200 deletions(-) -- 2.14.3