From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: gregkh@linuxfoundation.org, johan@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH] usb: serial: keyspan: remove unused USB_SERIAL_KEYSPAN_X firmware kconfig
Date: Mon, 22 Jan 2018 13:31:32 +0100 [thread overview]
Message-ID: <20180122123132.31583-1-clabbe.montjoie@gmail.com> (raw)
All USB_SERIAL_KEYSPAN_X are not used anywhere in kernel tree.
Furthermore all firmware files was removed since commit 2971c579f93bi ("keyspan: use request_firmware()")
So let's clean thoses unused symbols.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/usb/serial/Kconfig | 78 ----------------------------------------------
1 file changed, 78 deletions(-)
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a8d5f2e4878d..716a3aa142ff 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -322,84 +322,6 @@ config USB_SERIAL_KEYSPAN
To compile this driver as a module, choose M here: the
module will be called keyspan.
-config USB_SERIAL_KEYSPAN_MPR
- bool "USB Keyspan MPR Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the Keyspan MPR converter.
-
-config USB_SERIAL_KEYSPAN_USA28
- bool "USB Keyspan USA-28 Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-28 converter.
-
-config USB_SERIAL_KEYSPAN_USA28X
- bool "USB Keyspan USA-28X Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-28X converter.
- Be sure you have a USA-28X, there are also 28XA and 28XB
- models, the label underneath has the actual part number.
-
-config USB_SERIAL_KEYSPAN_USA28XA
- bool "USB Keyspan USA-28XA Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-28XA converter.
- Be sure you have a USA-28XA, there are also 28X and 28XB
- models, the label underneath has the actual part number.
-
-config USB_SERIAL_KEYSPAN_USA28XB
- bool "USB Keyspan USA-28XB Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-28XB converter.
- Be sure you have a USA-28XB, there are also 28X and 28XA
- models, the label underneath has the actual part number.
-
-config USB_SERIAL_KEYSPAN_USA19
- bool "USB Keyspan USA-19 Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-19 converter.
-
-config USB_SERIAL_KEYSPAN_USA18X
- bool "USB Keyspan USA-18X Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-18X converter.
-
-config USB_SERIAL_KEYSPAN_USA19W
- bool "USB Keyspan USA-19W Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-19W converter.
-
-config USB_SERIAL_KEYSPAN_USA19QW
- bool "USB Keyspan USA-19QW Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-19QW converter.
-
-config USB_SERIAL_KEYSPAN_USA19QI
- bool "USB Keyspan USA-19QI Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-19QI converter.
-
-config USB_SERIAL_KEYSPAN_USA49W
- bool "USB Keyspan USA-49W Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-49W converter.
-
-config USB_SERIAL_KEYSPAN_USA49WLC
- bool "USB Keyspan USA-49WLC Firmware"
- depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
- help
- Say Y here to include firmware for the USA-49WLC converter.
-
config USB_SERIAL_KLSI
tristate "USB KL5KUSB105 (Palmconnect) Driver"
---help---
--
2.13.6
next reply other threads:[~2018-01-22 12:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-22 12:31 Corentin Labbe [this message]
2018-01-25 9:37 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180122123132.31583-1-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®