From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752895AbeA3TSd (ORCPT ); Tue, 30 Jan 2018 14:18:33 -0500 Received: from mail.kernel.org ([198.145.29.99]:54580 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751699AbeA3TSc (ORCPT ); Tue, 30 Jan 2018 14:18:32 -0500 DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 616892173F Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=helgaas@kernel.org Date: Tue, 30 Jan 2018 13:18:27 -0600 From: Bjorn Helgaas To: =?utf-8?B?5Yav6ZSQ?= Cc: "lee.jones@linaro.org" , "linux-kernel@vger.kernel.org" , Hans de Goede , Dave Jiang , "linux-pci@vger.kernel.org" Subject: Re: =?utf-8?B?562U5aSNOiDnrZTlpI06IOetlA==?= =?utf-8?B?5aSNOg==?= [PATCH v6] mfd: Add support for RTS5250S power saving Message-ID: <20180130191827.GI232763@bhelgaas-glaptop.roam.corp.google.com> References: <1504772799-15173-1-git-send-email-rui_feng@realsil.com.cn> <20171214222522.GL30595@bhelgaas-glaptop.roam.corp.google.com> <2A308283684ECD4B896628E09AF5361E01A8150B@RS-MBS01.realsil.com.cn> <20171215151522.GT30595@bhelgaas-glaptop.roam.corp.google.com> <2A308283684ECD4B896628E09AF5361E01A8193C@RS-MBS01.realsil.com.cn> <20171227233750.GB79892@bhelgaas-glaptop.roam.corp.google.com> <20180117210121.GD7039@bhelgaas-glaptop.roam.corp.google.com> <2A308283684ECD4B896628E09AF5361E01A8A102@RS-MBS01.realsil.com.cn> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <2A308283684ECD4B896628E09AF5361E01A8A102@RS-MBS01.realsil.com.cn> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Jan 19, 2018 at 07:38:22AM +0000, 冯锐 wrote: > > On Wed, Dec 27, 2017 at 05:37:50PM -0600, Bjorn Helgaas wrote: > > > On Tue, Dec 19, 2017 at 08:15:24AM +0000, 冯锐 wrote: > > > > > On Fri, Dec 15, 2017 at 09:42:45AM +0000, 冯锐 wrote: > > > > > > > [+cc Hans, Dave, linux-pci] > > > > > > > > > > > > > > On Thu, Sep 07, 2017 at 04:26:39PM +0800, > > > > > > > rui_feng@realsil.com.cn > > > > > wrote: > > > > > > > > From: Rui Feng > > > > > > > > > > > > > > I wish this had been posted to linux-pci before being merged. > > > > > > > > > > > > > > I'm concerned because some of this appears to overlap and > > > > > > > conflict with PCI core management of ASPM. > > > > > > > > > > > > > > I assume these devices advertise ASPM support in their Link > > > > > > > Capabilites registers, right? If so, why isn't the existing > > > > > > > PCI core ASPM support sufficient? > > > > > > > > > > > > > When L1SS is configured, the device(hardware) can't enter L1SS > > > > > > status automatically, it need driver(software) to do some work > > > > > > to achieve the > > > > > function. > > > > > > > > > > So this is a hardware defect in the device? As far as I know, > > > > > ASPM and L1SS are specified such that they should work without special > > driver support. > > > > > > > > > Yes, you can say that. > > > > > > > > > > > > Enable power saving for RTS5250S as following steps: > > > > > > > > 1.Set 0xFE58 to enable clock power management. > > > > > > > > > > > > > > Is this clock power management something specific to RTS5250S, > > > > > > > or is it standard PCIe architected stuff? > > > > > > > > > > > > > 0xFE58 is specific register to RTS5250S not standard PCIe architected > > stuff. > > > > > > > > > > OK. I asked because devices often mirror architected PCIe config > > > > > things in device-specific MMIO space, and if I squint just right, > > > > > I can sort of match up the register bits you used with things in the PCIe > > spec. > > > > > > > > > > > > > 2.Check cfg space whether support L1SS or not. > > > > > > > > > > > > > > This sounds like standard PCIe ASPM L1 Substates, right? > > > > > > > > > > > > > Yes. > > > > > > > > > > > > > > 3.If support L1SS, set 0xFF03 to free clkreq. > > > > > > > > 4.When entering idle status, enable aspm > > > > > > > > and set parameters for L1SS and LTR. > > > > > > > > 5.Wnen entering run status, disable aspm > > > > > > > > and set parameters for L1SS and LTR. > > > > > > > > > > > > > > In general, drivers should not configure ASPM, L1SS, and LTR > > > > > > > themselves; the PCI core should do that. > > > > > > > > > > > > > > If a driver needs to tweak ASPM at run-time, it should use > > > > > > > interfaces exported by the PCI core to do so. > > > > > > > > > > > > > Which interface I can use to set ASPM? I use "pci_write_config_byte" > > now. > > > > > > > > > > What do you need to do? include/linux/pci-aspm.h exports > > > > > pci_disable_link_state(), which is mainly used to avoid ASPM > > > > > states that have hardware errata. > > > > > > > > > I want to enable ASPM(L0 -> L1) and disable ASPM(L1 -> L0), which > > > > interface can I use? > > > > > > You can use pci_disable_link_state() to disable usage of L1. > > > > > > Currently there is no corresponding pci_enable_link_state(). What if > > > we added something like the following (untested)? Would that work for > > > you? > > > > Hi Rui, > > > > Any thoughts on the patch below? > > I'm busy with other work, the patch seems ok, I will test it later. Any idea when you might get back to this? If you can't do it, I can try doing it myself, but of course, I don't know the details about the device errata and I wouldn't be able to test it. Bjorn