From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: Philipp Rossak <embed3d@gmail.com>
Cc: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, wens@csie.org,
linux@armlinux.org.uk, jic23@kernel.org, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, davem@davemloft.net,
hans.verkuil@cisco.com, mchehab@kernel.org, rask@formelder.dk,
clabbe.montjoie@gmail.com, sean@mess.org, krzk@kernel.org,
icenowy@aosc.io, edu.molinas@gmail.com, singhalsimran0@gmail.com,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support
Date: Wed, 31 Jan 2018 20:07:18 +0100 [thread overview]
Message-ID: <20180131190718.ustqzwdxzw7mqe52@qschulz> (raw)
In-Reply-To: <20180128232919.12639-9-embed3d@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4301 bytes --]
Hi Philipp,
On Mon, Jan 29, 2018 at 12:29:11AM +0100, Philipp Rossak wrote:
> This patch rewors the driver to support interrupts for the thermal part
> of the sensor.
>
> This is only available for the newer sensor (currently H3 and A83T).
> The interrupt will be trigerd on data available and triggers the update
> for the thermal sensors. All newer sensors have different amount of
> sensors and different interrupts for each device the reset of the
> interrupts need to be done different
>
> For the newer sensors is the autosuspend disabled.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> ---
> drivers/iio/adc/sun4i-gpadc-iio.c | 60 +++++++++++++++++++++++++++++++++++----
> include/linux/mfd/sun4i-gpadc.h | 2 ++
> 2 files changed, 56 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index 74eeb5cd5218..b7b5451226b0 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -71,11 +71,14 @@ struct gpadc_data {
> unsigned int temp_data[MAX_SENSOR_COUNT];
> int (*sample_start)(struct sun4i_gpadc_iio *info);
> int (*sample_end)(struct sun4i_gpadc_iio *info);
> + u32 irq_clear_map;
> + u32 irq_control_map;
I would say to use a regmap_irq_chip for controlling IRQs.
> bool has_bus_clk;
> bool has_bus_rst;
> bool has_mod_clk;
> int sensor_count;
> bool supports_nvmem;
> + bool support_irq;
> };
>
> static const struct gpadc_data sun4i_gpadc_data = {
> @@ -90,6 +93,7 @@ static const struct gpadc_data sun4i_gpadc_data = {
> .sample_end = sun4i_gpadc_sample_end,
> .sensor_count = 1,
> .supports_nvmem = false,
> + .support_irq = false,
False is the default, no need to set support_irq.
[...]
> struct sun4i_gpadc_iio {
> @@ -332,6 +339,11 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val,
> return 0;
> }
>
> + if (info->data->support_irq) {
> + regmap_read(info->regmap, info->data->temp_data[sensor], val);
> + return 0;
> + }
> +
Maybe you could define a new thermal_zone_of_device_ops for these new
thermal sensors? That way, you don't even need the boolean support_irq.
> return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
> }
>
> @@ -429,6 +441,17 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static irqreturn_t sunxi_irq_thread(int irq, void *data)
I think we're trying to avoid sunxi mentions but rather using the name
of the first IP (in term of product release, not support) using this
function.
> +{
> + struct sun4i_gpadc_iio *info = data;
> +
> + regmap_write(info->regmap, SUN8I_H3_THS_STAT, info->data->irq_clear_map);
> +
Will be handled by regmap_irq_chip.
[...]
> - info->no_irq = true;
> + if (info->data->support_irq) {
> + /* only the new versions of ths support right now irqs */
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ: %d\n", irq);
> + return irq;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> + sunxi_irq_thread, IRQF_ONESHOT,
> + dev_name(&pdev->dev), info);
> + if (ret)
> + return ret;
> +
> + } else
> + info->no_irq = true;
> +
That's a bit funny to have two booleans named no_irq and support_irq :)
> indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
> indio_dev->channels = sun8i_a33_gpadc_channels;
>
> @@ -789,11 +829,13 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - pm_runtime_set_autosuspend_delay(&pdev->dev,
> - SUN4I_GPADC_AUTOSUSPEND_DELAY);
> - pm_runtime_use_autosuspend(&pdev->dev);
> - pm_runtime_set_suspended(&pdev->dev);
> - pm_runtime_enable(&pdev->dev);
> + if (!info->data->support_irq) {
> + pm_runtime_set_autosuspend_delay(&pdev->dev,
> + SUN4I_GPADC_AUTOSUSPEND_DELAY);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + }
Why would you not want your IP to do runtime PM?
Quentin
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
next prev parent reply other threads:[~2018-01-31 19:07 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-28 23:29 [PATCH v2 00/16] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-01-29 9:19 ` Maxime Ripard
2018-01-29 12:30 ` Philipp Rossak
2018-01-31 17:40 ` Quentin Schulz
2018-01-31 18:14 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 02/16] arm: config: sunxi_defconfig: enable SUN4I_GPADC Philipp Rossak
2018-01-29 9:21 ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg Philipp Rossak
2018-01-29 9:27 ` Maxime Ripard
2018-01-31 17:51 ` Quentin Schulz
2018-01-31 18:35 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 05/16] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-01-29 9:31 ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 06/16] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-01-29 9:37 ` Maxime Ripard
2018-01-31 18:42 ` Quentin Schulz
2018-02-02 14:13 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-01-29 9:40 ` Maxime Ripard
2018-01-29 12:33 ` Philipp Rossak
2018-01-30 8:36 ` Maxime Ripard
2018-02-02 15:24 ` Philipp Rossak
2018-01-31 22:49 ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support Philipp Rossak
2018-01-31 19:07 ` Quentin Schulz [this message]
2018-02-02 14:30 ` Philipp Rossak
2018-01-31 21:47 ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 09/16] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-01-29 9:46 ` Maxime Ripard
2018-01-31 19:23 ` Quentin Schulz
2018-02-02 14:42 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-01-29 9:48 ` Maxime Ripard
2018-01-29 11:53 ` Philipp Rossak
2018-01-30 8:32 ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 11/16] arm: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-01-29 9:49 ` Maxime Ripard
2018-01-29 11:54 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 12/16] arm: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-01-29 9:50 ` Maxime Ripard
2018-01-29 11:56 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-01-29 9:52 ` Maxime Ripard
2018-01-29 12:03 ` Philipp Rossak
2018-04-19 15:11 ` [linux-sunxi] " Kyle Evans
2018-04-19 15:13 ` Icenowy Zheng
2018-04-19 15:19 ` Kyle Evans
2018-04-20 9:35 ` Philipp Rossak
2018-07-24 17:19 ` Paul Kocialkowski
2018-07-25 9:05 ` Emmanuel Vadot
2018-07-25 9:12 ` Paul Kocialkowski
2018-01-28 23:29 ` [PATCH v2 15/16] arm: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180131190718.ustqzwdxzw7mqe52@qschulz \
--to=quentin.schulz@free-electrons.com \
--cc=clabbe.montjoie@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edu.molinas@gmail.com \
--cc=embed3d@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=icenowy@aosc.io \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=krzk@kernel.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mchehab@kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=rask@formelder.dk \
--cc=robh+dt@kernel.org \
--cc=sean@mess.org \
--cc=singhalsimran0@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®