mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Derek Basehore <dbasehore@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Soby.Mathew@arm.com, sudeep.holla@arm.com,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com, linux-pm@vger.kernel.org,
	rafael.j.wysocki@intel.com, tglx@linutronix.de,
	briannorris@chromium.org, marc.zyngier@arm.com,
	Derek Basehore <dbasehore@chromium.org>
Subject: [PATCH v6 3/3] irqchip/gic-v3-its: add ability to resend MAPC on resume
Date: Wed,  7 Feb 2018 18:36:48 -0800	[thread overview]
Message-ID: <20180208023648.89124-4-dbasehore@chromium.org> (raw)
In-Reply-To: <20180208023648.89124-1-dbasehore@chromium.org>

This adds functionality to resend the MAPC command to an ITS node on
resume. If the ITS is powered down during suspend and the collections
are not backed by memory, the ITS will lose that state. This just sets
up the known state for the collections after the ITS is restored.

This is enabled via the reset-on-suspend flag in the DTS. It only runs
for collections stored in the ITS itself.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
---
 drivers/irqchip/irq-gic-v3-its.c   | 86 +++++++++++++++++++++-----------------
 include/linux/irqchip/arm-gic-v3.h |  1 +
 2 files changed, 49 insertions(+), 38 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 35ad48f51dfa..a564a92ab169 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1942,52 +1942,53 @@ static void its_cpu_init_lpis(void)
 	dsb(sy);
 }
 
-static void its_cpu_init_collection(void)
+static void its_cpu_init_collection(struct its_node *its)
 {
-	struct its_node *its;
-	int cpu;
-
-	spin_lock(&its_lock);
-	cpu = smp_processor_id();
-
-	list_for_each_entry(its, &its_nodes, entry) {
-		u64 target;
+	int cpu = smp_processor_id();
+	u64 target;
 
-		/* avoid cross node collections and its mapping */
-		if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
-			struct device_node *cpu_node;
+	/* avoid cross node collections and its mapping */
+	if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
+		struct device_node *cpu_node;
 
-			cpu_node = of_get_cpu_node(cpu, NULL);
-			if (its->numa_node != NUMA_NO_NODE &&
-				its->numa_node != of_node_to_nid(cpu_node))
-				continue;
-		}
+		cpu_node = of_get_cpu_node(cpu, NULL);
+		if (its->numa_node != NUMA_NO_NODE &&
+			its->numa_node != of_node_to_nid(cpu_node))
+			return;
+	}
 
+	/*
+	 * We now have to bind each collection to its target
+	 * redistributor.
+	 */
+	if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
 		/*
-		 * We now have to bind each collection to its target
+		 * This ITS wants the physical address of the
 		 * redistributor.
 		 */
-		if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
-			/*
-			 * This ITS wants the physical address of the
-			 * redistributor.
-			 */
-			target = gic_data_rdist()->phys_base;
-		} else {
-			/*
-			 * This ITS wants a linear CPU number.
-			 */
-			target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
-			target = GICR_TYPER_CPU_NUMBER(target) << 16;
-		}
+		target = gic_data_rdist()->phys_base;
+	} else {
+		/* This ITS wants a linear CPU number. */
+		target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
+		target = GICR_TYPER_CPU_NUMBER(target) << 16;
+	}
 
-		/* Perform collection mapping */
-		its->collections[cpu].target_address = target;
-		its->collections[cpu].col_id = cpu;
+	/* Perform collection mapping */
+	its->collections[cpu].target_address = target;
+	its->collections[cpu].col_id = cpu;
 
-		its_send_mapc(its, &its->collections[cpu], 1);
-		its_send_invall(its, &its->collections[cpu]);
-	}
+	its_send_mapc(its, &its->collections[cpu], 1);
+	its_send_invall(its, &its->collections[cpu]);
+}
+
+static void its_cpu_init_collections(void)
+{
+	struct its_node *its;
+
+	spin_lock(&its_lock);
+
+	list_for_each_entry(its, &its_nodes, entry)
+		its_cpu_init_collection(its);
 
 	spin_unlock(&its_lock);
 }
@@ -3131,6 +3132,15 @@ static void its_restore_enable(void)
 			its_write_baser(its, baser, baser->val);
 		}
 		writel_relaxed(its->ctlr_save, base + GITS_CTLR);
+
+		/*
+		 * Reinit the collection if it's stored in the ITS. This is
+		 * indicated by the col_id being less than the HWCOLLCNT.
+		 * CID < HCC as specified in the GIC v3 Documentation.
+		 */
+		if (its->collections[smp_processor_id()].col_id <
+		    GITS_TYPER_HWCOLLCNT(gic_read_typer(base + GITS_TYPER)))
+			its_cpu_init_collection(its);
 	}
 	spin_unlock(&its_lock);
 }
@@ -3397,7 +3407,7 @@ int its_cpu_init(void)
 			return -ENXIO;
 		}
 		its_cpu_init_lpis();
-		its_cpu_init_collection();
+		its_cpu_init_collections();
 	}
 
 	return 0;
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index c00c4c33e432..c9c33b91a1f1 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -313,6 +313,7 @@
 #define GITS_TYPER_DEVBITS(r)		((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)
 #define GITS_TYPER_PTA			(1UL << 19)
 #define GITS_TYPER_HWCOLLCNT_SHIFT	24
+#define GITS_TYPER_HWCOLLCNT(r)		(((r) >> GITS_TYPER_HWCOLLCNT_SHIFT) & 0xff)
 #define GITS_TYPER_VMOVP		(1ULL << 37)
 
 #define GITS_IIDR_REV_SHIFT		12
-- 
2.16.0.rc1.238.g530d649a79-goog

  parent reply	other threads:[~2018-02-08  2:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-08  2:36 [PATCH v6 0/3] GICv3 Save and Restore Derek Basehore
2018-02-08  2:36 ` [PATCH v6 1/3] irqchip/gic-v3-its: add ability to save/restore ITS state Derek Basehore
2018-02-08 17:55   ` Brian Norris
2018-02-08  2:36 ` [PATCH v6 2/3] DT/arm,gic-v3-its: add reset-on-suspend property Derek Basehore
2018-02-08 13:46   ` Mark Rutland
2018-02-08  2:36 ` Derek Basehore [this message]
2018-02-08 18:02   ` [PATCH v6 3/3] irqchip/gic-v3-its: add ability to resend MAPC on resume Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180208023648.89124-4-dbasehore@chromium.org \
    --to=dbasehore@chromium.org \
    --cc=Soby.Mathew@arm.com \
    --cc=briannorris@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®