From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH 07/45] rtc: ds1305: put ds1305_nvmem_cfg on the stack
Date: Mon, 12 Feb 2018 23:47:21 +0100 [thread overview]
Message-ID: <20180212224759.15999-8-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20180212224759.15999-1-alexandre.belloni@bootlin.com>
This makes to code safer on system using two similar RTCs.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-ds1305.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index affa90da26f1..3d2400a39da9 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -544,15 +544,6 @@ static int ds1305_nvram_write(void *priv, unsigned int off, void *buf,
return spi_sync(spi, &m);
}
-static struct nvmem_config ds1305_nvmem_cfg = {
- .name = "ds1305_nvram",
- .word_size = 1,
- .stride = 1,
- .size = DS1305_NVRAM_LEN,
- .reg_read = ds1305_nvram_read,
- .reg_write = ds1305_nvram_write,
-};
-
/*----------------------------------------------------------------------*/
/*
@@ -566,6 +557,14 @@ static int ds1305_probe(struct spi_device *spi)
u8 addr, value;
struct ds1305_platform_data *pdata = dev_get_platdata(&spi->dev);
bool write_ctrl = false;
+ struct nvmem_config ds1305_nvmem_cfg = {
+ .name = "ds1305_nvram",
+ .word_size = 1,
+ .stride = 1,
+ .size = DS1305_NVRAM_LEN,
+ .reg_read = ds1305_nvram_read,
+ .reg_write = ds1305_nvram_write,
+ };
/* Sanity check board setup data. This may be hooked up
* in 3wire mode, but we don't care. Note that unless
--
2.16.1
next prev parent reply other threads:[~2018-02-12 22:48 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 22:47 [PATCH 00/45] RTC: nvmem improvements Alexandre Belloni
2018-02-12 22:47 ` [PATCH 01/45] rtc: documentation: correct nvmem date and version Alexandre Belloni
2018-02-12 22:47 ` [PATCH 02/45] rtc: nvmem: pass nvmem_config to rtc_nvmem_register() Alexandre Belloni
2018-02-12 22:47 ` [PATCH 03/45] rtc: nvmem: return error values Alexandre Belloni
2018-02-12 22:47 ` [PATCH 04/45] rtc: nvmem: disallow registering nvmem more than once Alexandre Belloni
2018-02-12 22:47 ` [PATCH 05/45] rtc: export rtc_nvmem_register() to drivers Alexandre Belloni
2018-02-12 22:47 ` [PATCH 06/45] rtc: ds1305: call rtc_nvmem_register() Alexandre Belloni
2018-02-12 22:47 ` Alexandre Belloni [this message]
2018-02-12 22:47 ` [PATCH 08/45] rtc: ds1307: " Alexandre Belloni
2018-02-12 22:47 ` [PATCH 09/45] rtc: ds1307: put struct nvmem_config on the stack Alexandre Belloni
2018-02-12 22:47 ` [PATCH 10/45] rtc: ds1511: call rtc_nvmem_register() Alexandre Belloni
2018-02-12 22:47 ` [PATCH 11/45] rtc: ds1511: put ds1511_nvmem_cfg on the stack Alexandre Belloni
2018-02-12 22:47 ` [PATCH 12/45] rtc: m48t86: call rtc_nvmem_register() Alexandre Belloni
2018-02-12 22:47 ` [PATCH 13/45] rtc: m48t86: put m48t86_nvmem_cfg on the stack Alexandre Belloni
2018-02-12 22:47 ` [PATCH 14/45] rtc: omap: call rtc_nvmem_register() Alexandre Belloni
2018-02-12 22:47 ` [PATCH 15/45] rtc: pcf85363: " Alexandre Belloni
2018-02-12 22:47 ` [PATCH 16/45] rtc: pcf85363: put struct nvmem_config on the stack Alexandre Belloni
2018-02-12 22:47 ` [PATCH 17/45] rtc: rv8803: call rtc_nvmem_register() Alexandre Belloni
2018-02-12 22:47 ` [PATCH 18/45] rtc: rv8803: put struct nvmem_config on the stack Alexandre Belloni
2018-02-12 22:47 ` [PATCH 19/45] rtc: rv8803: fix possible race condition Alexandre Belloni
2018-02-12 22:47 ` [PATCH 20/45] rtc: remove nvmem_config Alexandre Belloni
2018-02-12 22:47 ` [PATCH 21/45] rtc: ds1343: simplify regmap initialization Alexandre Belloni
2018-02-12 22:47 ` [PATCH 22/45] rtc: ds1343: switch to rtc_register_device Alexandre Belloni
2018-02-12 22:47 ` [PATCH 23/45] rtc: ds1343: remove undocumented and useless sysfs files Alexandre Belloni
2018-02-12 22:47 ` [PATCH 24/45] rtc: ds1343: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 25/45] rtc: m48t59: switch to rtc_register_device Alexandre Belloni
2018-02-12 22:47 ` [PATCH 26/45] rtc: m48t59: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 27/45] rtc: sirfsoc: remove useless sirfsoc_rtc_ioctl Alexandre Belloni
2018-02-12 22:47 ` [PATCH 28/45] rtc: ds1553: switch to rtc_register_device Alexandre Belloni
2018-02-12 22:47 ` [PATCH 29/45] rtc: ds1553: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 30/45] rtc: ds1553: make alarms useful Alexandre Belloni
2018-02-12 22:47 ` [PATCH 31/45] rtc: cmos: fix possible race condition Alexandre Belloni
2018-02-12 22:47 ` [PATCH 32/45] rtc: cmos: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 33/45] rtc: ds1742: switch to rtc_register_device Alexandre Belloni
2018-02-12 22:47 ` [PATCH 34/45] rtc: ds1742: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 35/45] rtc: rp5c01: fix possible race condition Alexandre Belloni
2018-02-12 22:47 ` [PATCH 36/45] rtc: rp5c01: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 37/45] rtc: stk17ta8: make alarms useful Alexandre Belloni
2018-02-12 22:47 ` [PATCH 38/45] rtc: stk17ta8: switch to rtc_register_device Alexandre Belloni
2018-02-12 22:47 ` [PATCH 39/45] rtc: stk17ta8: fix possible race condition Alexandre Belloni
2018-02-12 22:47 ` [PATCH 40/45] rtc: stk17ta8: use generic nvmem Alexandre Belloni
2018-02-12 22:47 ` [PATCH 41/45] rtc: tx4939: remove arch/mips dependency Alexandre Belloni
2018-02-12 22:47 ` [PATCH 42/45] rtc: tx4939: extend test coverage Alexandre Belloni
2018-02-12 22:47 ` [PATCH 43/45] rtc: tx4939: switch to rtc_register_device Alexandre Belloni
2018-02-12 22:47 ` [PATCH 44/45] rtc: tx4939: fix possible race condition Alexandre Belloni
2018-02-12 22:47 ` [PATCH 45/45] rtc: tx4939: use generic nvmem Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180212224759.15999-8-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®