mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose.Abreu@synopsys.com, vbhadram@nvidia.com,
	Niklas Cassel <niklass@axis.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/7] net: stmmac: set MSS for each tx DMA channel
Date: Mon, 19 Feb 2018 18:11:09 +0100	[thread overview]
Message-ID: <20180219171116.15326-2-niklas.cassel@axis.com> (raw)
In-Reply-To: <20180219171116.15326-1-niklas.cassel@axis.com>

The DMA engine in dwmac4 can segment a large TSO packet to several
smaller packets of (max) size Maximum Segment Size (MSS).

The DMA engine fetches and saves the MSS via a context descriptor.

This context decriptor has to be provided to each tx DMA channel.
To ensure that this is done, move struct member mss from stmmac_priv
to stmmac_tx_queue.

stmmac_reset_queues_param() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_resume().

init_dma_tx_desc_rings() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_open().

This fixes tx queue timeouts for dwmac4, with DT property
snps,tx-queues-to-use > 1, when running iperf3 with multiple threads.

Fixes: ce736788e8a9 ("net: stmmac: adding multiple buffers for TX")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++--------
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index a916e13624eb..75161e1b7e55 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -58,6 +58,7 @@ struct stmmac_tx_queue {
 	unsigned int dirty_tx;
 	dma_addr_t dma_tx_phy;
 	u32 tx_tail_addr;
+	u32 mss;
 };
 
 struct stmmac_rx_queue {
@@ -138,7 +139,6 @@ struct stmmac_priv {
 	spinlock_t ptp_lock;
 	void __iomem *mmcaddr;
 	void __iomem *ptpaddr;
-	u32 mss;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dbgfs_dir;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7ad841434ec8..d38bf38f12f5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1355,6 +1355,7 @@ static int init_dma_tx_desc_rings(struct net_device *dev)
 
 		tx_q->dirty_tx = 0;
 		tx_q->cur_tx = 0;
+		tx_q->mss = 0;
 
 		netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
 	}
@@ -1946,6 +1947,7 @@ static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan)
 						     (i == DMA_TX_SIZE - 1));
 	tx_q->dirty_tx = 0;
 	tx_q->cur_tx = 0;
+	tx_q->mss = 0;
 	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan));
 	stmmac_start_tx_dma(priv, chan);
 
@@ -2632,7 +2634,6 @@ static int stmmac_open(struct net_device *dev)
 
 	priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
 	priv->rx_copybreak = STMMAC_RX_COPYBREAK;
-	priv->mss = 0;
 
 	ret = alloc_dma_desc_resources(priv);
 	if (ret < 0) {
@@ -2872,10 +2873,10 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 	mss = skb_shinfo(skb)->gso_size;
 
 	/* set new MSS value if needed */
-	if (mss != priv->mss) {
+	if (mss != tx_q->mss) {
 		mss_desc = tx_q->dma_tx + tx_q->cur_tx;
 		priv->hw->desc->set_mss(mss_desc, mss);
-		priv->mss = mss;
+		tx_q->mss = mss;
 		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE);
 	}
 
@@ -4436,6 +4437,7 @@ static void stmmac_reset_queues_param(struct stmmac_priv *priv)
 
 		tx_q->cur_tx = 0;
 		tx_q->dirty_tx = 0;
+		tx_q->mss = 0;
 	}
 }
 
@@ -4481,11 +4483,6 @@ int stmmac_resume(struct device *dev)
 
 	stmmac_reset_queues_param(priv);
 
-	/* reset private mss value to force mss context settings at
-	 * next tso xmit (only used for gmac4).
-	 */
-	priv->mss = 0;
-
 	stmmac_clear_descriptors(priv);
 
 	stmmac_hw_setup(ndev, false);
-- 
2.14.2

  reply	other threads:[~2018-02-19 17:11 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-19 17:11 [PATCH net-next 0/7] stmmac multi-queue fixes and cleanups Niklas Cassel
2018-02-19 17:11 ` Niklas Cassel [this message]
2018-02-20  7:31   ` [PATCH net-next 1/7] net: stmmac: set MSS for each tx DMA channel Giuseppe CAVALLARO
2018-02-19 17:11 ` [PATCH net-next 2/7] net: stmmac: do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit() Niklas Cassel
2018-02-19 17:11 ` [PATCH net-next 3/7] net: stmmac: WARN if tx_skbuff entries are reused before cleared Niklas Cassel
2018-02-19 17:11 ` [PATCH net-next 4/7] net: stmmac: rename dwmac4_tx_queue_routing() to match reality Niklas Cassel
2018-02-19 17:11 ` [PATCH net-next 5/7] net: stmmac: call correct function in stmmac_mac_config_rx_queues_routing() Niklas Cassel
2018-02-19 17:11 ` [PATCH net-next 6/7] net: stmmac: add error handling in stmmac_mtl_setup() Niklas Cassel
2018-02-19 17:11 ` [PATCH net-next 7/7] net: stmmac: honor error code from stmmac_dt_phy() Niklas Cassel
2018-02-19 18:12 ` [PATCH net-next 0/7] stmmac multi-queue fixes and cleanups Jose Abreu
2018-02-20 19:14 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180219171116.15326-2-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alexandre.torgue@st.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=niklass@axis.com \
    --cc=peppe.cavallaro@st.com \
    --cc=vbhadram@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®