From: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Cc: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Subject: [PATCH v2 2/3] HID: steam: add serial number information
Date: Tue, 20 Feb 2018 20:33:05 +0100 [thread overview]
Message-ID: <20180220193306.28748-3-rodrigorivascosta@gmail.com> (raw)
In-Reply-To: <20180220193306.28748-1-rodrigorivascosta@gmail.com>
This device has a feature report to send and receive commands.
Use it to get the serial number and set the device's uniq value.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
---
drivers/hid/hid-steam.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 102 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c
index 7b2f16b7bb49..c9d0f909c8a0 100644
--- a/drivers/hid/hid-steam.c
+++ b/drivers/hid/hid-steam.c
@@ -12,6 +12,8 @@
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
#include "hid-ids.h"
MODULE_LICENSE("GPL");
@@ -31,8 +33,99 @@ struct steam_device {
unsigned long quirks;
struct work_struct work_connect;
bool connected;
+ char serial_no[11];
};
+static int steam_recv_report(struct steam_device *steam,
+ u8 *data, int size)
+{
+ struct hid_report *r;
+ u8 *buf;
+ int ret;
+
+ r = steam->hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[0];
+ if (hid_report_len(r) < 64)
+ return -EINVAL;
+ buf = hid_alloc_report_buf(r, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /*
+ * The report ID is always 0, so strip the first byte from the output.
+ * hid_report_len() is not counting the report ID, so +1 to the length
+ * or else we get a EOVERFLOW. We are safe from a buffer overflow
+ * because hid_alloc_report_buf() allocates +7 bytes.
+ */
+ ret = hid_hw_raw_request(steam->hdev, 0x00,
+ buf, hid_report_len(r) + 1,
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ if (ret > 0)
+ memcpy(data, buf + 1, min(size, ret - 1));
+ kfree(buf);
+ return ret;
+}
+
+static int steam_send_report(struct steam_device *steam,
+ u8 *cmd, int size)
+{
+ struct hid_report *r;
+ u8 *buf;
+ int retry;
+ int ret;
+
+ r = steam->hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[0];
+ if (hid_report_len(r) < 64)
+ return -EINVAL;
+ buf = hid_alloc_report_buf(r, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* The report ID is always 0 */
+ memcpy(buf + 1, cmd, size);
+
+ /*
+ * Sometimes the wireless controller fails with EPIPE
+ * when sending a feature report.
+ * Doing a HID_REQ_GET_REPORT and waiting for a while
+ * seems to fix that.
+ */
+ for (retry = 0; retry < 10; ++retry) {
+ ret = hid_hw_raw_request(steam->hdev, 0,
+ buf, size + 1,
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret != -EPIPE)
+ break;
+ steam_recv_report(steam, NULL, 0);
+ msleep(50);
+ }
+ kfree(buf);
+ if (ret < 0)
+ hid_err(steam->hdev, "%s: error %d (%*ph)\n", __func__,
+ ret, size, cmd);
+ return ret;
+}
+
+static int steam_get_serial(struct steam_device *steam)
+{
+ /*
+ * Send: 0xae 0x15 0x01
+ * Recv: 0xae 0x15 0x01 serialnumber (10 chars)
+ */
+ int ret;
+ u8 cmd[] = {0xae, 0x15, 0x01};
+ u8 reply[14];
+
+ ret = steam_send_report(steam, cmd, sizeof(cmd));
+ if (ret < 0)
+ return ret;
+ ret = steam_recv_report(steam, reply, sizeof(reply));
+ if (ret < 0)
+ return ret;
+ reply[13] = 0;
+ strcpy(steam->serial_no, reply + 3);
+ return 0;
+}
+
static int steam_input_open(struct input_dev *dev)
{
struct steam_device *steam = input_get_drvdata(dev);
@@ -53,7 +146,12 @@ static int steam_register(struct steam_device *steam)
struct input_dev *input;
int ret;
- hid_info(hdev, "Steam Controller connected");
+ ret = steam_get_serial(steam);
+ if (ret)
+ return ret;
+
+ hid_info(hdev, "Steam Controller '%s' connected",
+ steam->serial_no);
input = input_allocate_device();
if (!input)
@@ -68,7 +166,7 @@ static int steam_register(struct steam_device *steam)
"Wireless Steam Controller" :
"Steam Controller";
input->phys = hdev->phys;
- input->uniq = hdev->uniq;
+ input->uniq = steam->serial_no;
input->id.bustype = hdev->bus;
input->id.vendor = hdev->vendor;
input->id.product = hdev->product;
@@ -121,7 +219,8 @@ static int steam_register(struct steam_device *steam)
static void steam_unregister(struct steam_device *steam)
{
if (steam->input) {
- hid_info(steam->hdev, "Steam Controller disconnected");
+ hid_info(steam->hdev, "Steam Controller '%s' disconnected",
+ steam->serial_no);
input_unregister_device(steam->input);
steam->input = NULL;
}
--
2.16.1
next prev parent reply other threads:[~2018-02-20 19:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-20 19:33 [PATCH v2 0/3] new driver for Valve Steam Controller Rodrigo Rivas Costa
2018-02-20 19:33 ` [PATCH v2 1/3] HID: add " Rodrigo Rivas Costa
2018-02-21 5:32 ` Cameron Gutman
2018-02-22 22:54 ` Rodrigo Rivas Costa
2018-02-21 14:13 ` Benjamin Tissoires
2018-02-20 19:33 ` Rodrigo Rivas Costa [this message]
2018-02-20 19:33 ` [PATCH v2 3/3] HID: steam: add battery device Rodrigo Rivas Costa
2018-02-20 22:29 ` [PATCH v2 0/3] new driver for Valve Steam Controller Pierre-Loup A. Griffais
2018-02-20 23:20 ` Rodrigo Rivas Costa
2018-02-21 0:09 ` Pierre-Loup A. Griffais
2018-02-21 20:21 ` Rodrigo Rivas Costa
2018-02-22 0:13 ` Pierre-Loup A. Griffais
2018-02-22 9:05 ` Clément VUCHENER
2018-02-22 9:10 ` Benjamin Tissoires
2018-02-22 16:31 ` Rodrigo Rivas Costa
2018-02-22 17:06 ` Benjamin Tissoires
2018-02-22 17:48 ` Rodrigo Rivas Costa
2018-02-23 8:20 ` Benjamin Tissoires
2018-02-21 10:39 ` Clément VUCHENER
2018-02-21 10:57 ` Rodrigo Rivas Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180220193306.28748-3-rodrigorivascosta@gmail.com \
--to=rodrigorivascosta@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome