From: Brian Masney <masneyb@onstation.org>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
linux-kernel@vger.kernel.org, Jon.Brenner@ams.com
Subject: [PATCH 03/12] staging: iio: tsl2x7x: add common function for reading chip status
Date: Sat, 3 Mar 2018 20:49:33 -0500 [thread overview]
Message-ID: <20180304014942.18727-4-masneyb@onstation.org> (raw)
In-Reply-To: <20180304014942.18727-1-masneyb@onstation.org>
There were three places where the same chunk of code was used to read
the chip status. This patch creates a common function
tsl2x7x_read_status() to reduce duplicate code. This patch also corrects
tsl2x7x_event_handler() to properly check for an error after reading the
chip status.
Signed-off-by: Brian Masney <masneyb@onstation.org>
---
drivers/staging/iio/light/tsl2x7x.c | 40 ++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
index c02db03ef369..6bb622816660 100644
--- a/drivers/staging/iio/light/tsl2x7x.c
+++ b/drivers/staging/iio/light/tsl2x7x.c
@@ -293,6 +293,20 @@ static int tsl2x7x_clear_interrupts(struct tsl2X7X_chip *chip, int reg)
return ret;
}
+static int tsl2x7x_read_status(struct tsl2X7X_chip *chip)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(chip->client,
+ TSL2X7X_CMD_REG | TSL2X7X_STATUS);
+ if (ret < 0)
+ dev_err(&chip->client->dev,
+ "%s: failed to read STATUS register: %d\n", __func__,
+ ret);
+
+ return ret;
+}
+
/**
* tsl2x7x_get_lux() - Reads and calculates current lux value.
* @indio_dev: pointer to IIO device
@@ -332,13 +346,10 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
goto out_unlock;
}
- ret = i2c_smbus_read_byte_data(chip->client,
- TSL2X7X_CMD_REG | TSL2X7X_STATUS);
- if (ret < 0) {
- dev_err(&chip->client->dev,
- "%s: Failed to read STATUS Reg\n", __func__);
+ ret = tsl2x7x_read_status(chip);
+ if (ret < 0)
goto out_unlock;
- }
+
/* is data new & valid */
if (!(ret & TSL2X7X_STA_ADC_VALID)) {
dev_err(&chip->client->dev,
@@ -458,12 +469,9 @@ static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
return -EBUSY;
}
- ret = i2c_smbus_read_byte_data(chip->client,
- TSL2X7X_CMD_REG | TSL2X7X_STATUS);
- if (ret < 0) {
- dev_err(&chip->client->dev, "i2c err=%d\n", ret);
+ ret = tsl2x7x_read_status(chip);
+ if (ret < 0)
goto prox_poll_err;
- }
switch (chip->id) {
case tsl2571:
@@ -1396,13 +1404,13 @@ static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
struct tsl2X7X_chip *chip = iio_priv(indio_dev);
s64 timestamp = iio_get_time_ns(indio_dev);
int ret;
- u8 value;
- value = i2c_smbus_read_byte_data(chip->client,
- TSL2X7X_CMD_REG | TSL2X7X_STATUS);
+ ret = tsl2x7x_read_status(chip);
+ if (ret < 0)
+ return ret;
/* What type of interrupt do we need to process */
- if (value & TSL2X7X_STA_PRX_INTR) {
+ if (ret & TSL2X7X_STA_PRX_INTR) {
tsl2x7x_get_prox(indio_dev); /* freshen data for ABI */
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
@@ -1412,7 +1420,7 @@ static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
timestamp);
}
- if (value & TSL2X7X_STA_ALS_INTR) {
+ if (ret & TSL2X7X_STA_ALS_INTR) {
tsl2x7x_get_lux(indio_dev); /* freshen data for ABI */
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
--
2.14.3
next prev parent reply other threads:[~2018-03-04 1:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-04 1:49 [PATCH 00/12] staging cleanups Brian Masney
2018-03-04 1:49 ` [PATCH 01/12] staging: iio: tsl2x7x: remove power functions from tsl2X7X_platform_data Brian Masney
2018-03-10 14:20 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 02/12] staging: iio: tsl2x7x: add common function for clearing interrupts Brian Masney
2018-03-10 14:27 ` Jonathan Cameron
2018-03-04 1:49 ` Brian Masney [this message]
2018-03-10 14:34 ` [PATCH 03/12] staging: iio: tsl2x7x: add common function for reading chip status Jonathan Cameron
2018-03-04 1:49 ` [PATCH 04/12] staging: iio: tsl2x7x: add common function for writing to the control register Brian Masney
2018-03-10 14:36 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 05/12] staging: iio: tsl2x7x: convert mutex_trylock() to mutex_lock() Brian Masney
2018-03-10 14:39 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 06/12] staging: iio: tsl2x7x: correctly return errors in tsl2x7x_get_prox() Brian Masney
2018-03-10 14:42 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 07/12] staging: iio: tsl2x7x: correct 'Avoid CamelCase' warning from checkpatch Brian Masney
2018-03-10 14:43 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 08/12] staging: iio: tsl2x7x: add error handling to tsl2x7x_prox_cal() Brian Masney
2018-03-10 14:44 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 09/12] staging: iio: tsl2x7x: add missing error checks Brian Masney
2018-03-10 14:45 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 10/12] staging: iio: tsl2x7x: make logging consistent and correct newlines Brian Masney
2018-03-10 14:52 ` Jonathan Cameron
2018-03-11 13:45 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 11/12] staging: iio: tsl2x7x: remove unnecessary sysfs attribute Brian Masney
2018-03-10 14:54 ` Jonathan Cameron
2018-03-04 1:49 ` [PATCH 12/12] staging: iio: tsl2x7x: make proximity sensor function correctly Brian Masney
2018-03-10 14:56 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180304014942.18727-4-masneyb@onstation.org \
--to=masneyb@onstation.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®